✅ Updated Nov 2026
Affiliate Disclosure: As an Amazon Associate, we earn from qualifying purchases. Links marked "Check on Amazon" are affiliate links — learn more.

To run a Dell SupportAssist diagnostic, open the SupportAssist app in Windows and start a hardware scan, or, if Windows will not load, restart the PC, tap F12 at the Dell logo to reach the one-time boot menu and choose the Diagnostics option to run the preboot test. The app route suits a PC that still boots, and the preboot route suits one that does not. Both report a result or an error code you can look up on Dell’s support site.

Two Ways to Run Dell Diagnostics

MethodUse whenWhere it runsNotes
SupportAssist hardware scan in WindowsThe PC boots but is slow, crashes or shows device errorsInside WindowsDell says the app monitors system health and can scan to find issues
Preboot diagnostics (F12 menu)Windows will not start, or you suspect a hardware faultBefore Windows loadsNot affected by Windows software problems
SupportAssist OS RecoveryRepeated boot failuresRecovery environment on supported Dell systemsDell says it starts automatically after repeated failed boots, and includes diagnostic, repair, backup and reset tools

Before You Begin

  • Save your work and close programs, because scans can restart the PC.
  • Plug a laptop into its charger. Many diagnostic tools refuse to run, or give unreliable results, on low battery.
  • Disconnect unneeded USB devices, docks and external drives so they do not confuse the results.
  • Note the Service Tag, which is printed on a label on the PC or shown in SupportAssist. Dell support pages ask for it.
  • Remember that the interface changes between versions of the app and between Dell models, so follow the labels you see.

Method 1: Run a Hardware Scan From Windows

  1. Click Start and type SupportAssist, then open the app. On some Dell systems it is pre-installed; if it is missing, Dell offers it for download from its support site.
  2. Accept any first-run prompts. Dell’s app asks for permission to scan and collect system information.
  3. Look for the option to run a scan or troubleshoot your PC. Depending on the version, the entry may be named Troubleshooting, Run hardware scan, or a similar label.
  4. Choose the type of scan. Quick checks examine the main components, and fuller or custom checks test selected parts in more depth. Start with the quick option unless you already know which component misbehaves.
  5. Let the scan run and do not use the PC. Some tests ask you to watch the screen, press keys, or confirm that you heard a sound.
  6. Read the result. A pass means the component tested did not report a fault during that test, while a failure typically comes with an error code and an offer to start a support request or fix.

Method 2: Preboot Diagnostics Using F12

  1. Shut the PC down fully.
  2. Power it on and tap F12 repeatedly when the Dell logo appears, to open the one-time boot menu.
  3. Select Diagnostics. On some models the entry sits in a separate section of the menu, and the name or position can differ by model.
  4. The PC starts its built-in test environment and begins checking memory, storage, the processor and other parts. Answer any prompts on screen.
  5. When testing ends, note the result, any error code and the validation code, if shown. Photograph the screen so you can look the code up.

If F12 does not respond, power off and try again, tapping the key earlier and more often. A wireless or Bluetooth keyboard may not work this early, so use a wired keyboard if possible. Some Dell desktops and laptops also provide a way to start diagnostics with a key-and-power combination, so consult the model’s service manual if the F12 menu is missing.

What the Tests Usually Cover

ComponentWhat a scan checksTypical symptom that justifies running it
MemoryReads and writes patterns across installed RAMRandom crashes, blue screens, failure to boot
Storage driveBasic read tests and drive health reportingSlow loading, file errors, clicking sounds from a hard drive
ProcessorComputation testsFreezes, sudden shutdowns
Battery and power adapterCharge and adapter detectionNot charging, quick battery drain
Fans and thermal sensorsFan response checksLoud fan noise, overheating
Display and inputColour or pattern screens, keyboard, touchpad promptsDead pixels, lines, unresponsive keys

The exact list depends on the model and version, so treat this table as a general guide, not a promise of every test.

Reading the Results

  • All tests passed, but the problem continues. The fault may be software, a driver, heat under load or something an intermittent test did not catch. Update drivers and firmware through Dell’s tools, then try the extended or custom test.
  • Error code shown. Search the code, with your model name, on Dell’s support site. The code can map to a specific part such as memory or the drive.
  • Failure on memory. If the PC has more than one module, power it off, unplug it, and reseat the modules according to the service manual. You can then test again, one module at a time, to see which one is faulty.
  • Failure on the drive. Copy any important files off straight away if you can. A failing drive can get worse with use, so stop heavy use and contact Dell support or a technician.
  • Warranty. If the system is under warranty, Dell support will often ask for the error code and Service Tag before agreeing to a repair or part replacement.

When Windows Will Not Start

Dell states that on supported systems, SupportAssist OS Recovery is factory-installed and starts automatically when the computer cannot boot normally after repeated attempts. From that environment you can diagnose hardware issues, repair the PC, back up files and reset to factory state. Because a factory reset removes your data, back up first when the option is offered. This is also the best route for a stuck-in-boot-loop laptop.

Common Mistakes

  • Running a scan on low battery. Plug in the charger first.
  • Skipping the preboot test for boot failures. A Windows-based scan cannot run if Windows will not start.
  • Ignoring the error code. Write it down or photograph it. It is the fastest way to a precise answer from Dell support.
  • Interrupting the test. Closing the lid or pulling power mid-scan can force a restart and lose results.
  • Assuming a pass means perfect hardware. Tests report what they checked at that moment. Intermittent faults can pass.
  • Using the factory reset too early. Reset is a last step. Back up your files first.

Frequently Asked Questions

Is SupportAssist built into every Dell PC?

Many Dell consumer systems ship with it, but not necessarily all models or a clean Windows install. If it is missing, Dell provides downloads on its support site. Preboot diagnostics are part of the system firmware on many models.

How long does a Dell diagnostic take?

A quick check can take several minutes and extended tests can run much longer, especially on large memory or storage. Time varies by model and test type, so allow the PC to run uninterrupted.

What does it mean if the scan finds no problems?

No fault was found by the tests run. If the symptoms continue, try the extended tests, update drivers and BIOS through Dell tools, and test under the same conditions that cause the problem. If it persists, contact Dell support.

Can I run diagnostics on a Dell gaming laptop or Alienware system?

Many Dell-made gaming systems carry the same preboot diagnostics. Some Alienware models use their own software alongside SupportAssist, so confirm the options in the model’s manual or on Dell’s support page for that model.

Do I need an internet connection?

Preboot diagnostics run from the PC itself. The SupportAssist app uses the internet to update itself, look up solutions and open support cases, so a connection helps for those parts.

Will running diagnostics delete my files?

The scans are designed to test, not to erase. Reset and recovery options within SupportAssist OS Recovery can erase data, so read each prompt carefully and back up first.

Explore Our Guides & Free Tools