Updated November 2026 – To fix a broken gaming chair, first identify the failed part: a sinking seat means a worn gas lift, a wobbly armrest usually means loose screws, a chair that will not stay reclined points to the tilt mechanism, and peeling surface is worn PU leather. Check the warranty before you take anything apart, because many makers repair or replace parts for free.
How to Fix a Broken Gaming Chair: Start With the Warranty
Gaming chair makers such as Secretlab, Razer, Corsair and DXRacer list warranty terms on their websites, and the length varies by model and region. Gas lifts, armrests and tilt mechanisms are often covered, and some makers also cover upholstery for a shorter period. Contact the maker or seller with your order number and a photo of the fault. If the chair is covered, opening it or swapping parts yourself may affect the claim, so wait for their answer first.
Quick Reference: Symptom, Cause and Fix
| Symptom | Likely cause | Fix |
|---|---|---|
| Seat sinks slowly or will not stay up | Worn gas cylinder | Replace the gas lift (class 4) |
| Armrest wobbles | Loose bolts or worn plastic mount | Tighten screws, replace armrest cap or mount |
| Chair will not stay reclined or tilts by itself | Tilt lock or mechanism fault | Tighten, lubricate, or replace the mechanism |
| Chair rolls poorly or squeaks | Worn casters, dirt | Clean and replace casters |
| Seat rocks or leans | Loose seat plate bolts | Tighten bolts, check the mechanism plate |
| Surface flaking or peeling | PU leather degradation | Cover, patch or reupholster |
| Cracked base or arm | Fatigue, overload | Stop use and replace the part |
Safety First
- Never cut, drill or heat a gas cylinder. It holds pressurised gas and should be removed and discarded intact.
- Do not stand on a rolling chair or lean it back while a part is loose.
- Wear safety glasses and gloves when removing a cylinder, and keep fingers clear of the tilt mechanism.
- Stop using a chair with a cracked base, cracked mechanism plate or a cylinder that collapses suddenly. A sudden drop can cause injury.
- Check the maker’s weight limit and do not exceed it.
Gas Cylinder Replacement: Class 4 Size
If the seat will not stay at height, the gas cylinder has lost pressure. The cylinder sits in the centre of the base and links the base to the seat mechanism. Most gaming chairs and office chairs use a standard cylinder, and class 4 is the heavy-duty grade that parts sellers commonly list for gaming chairs. Class 3 has a thinner wall and a lower load rating, so a heavy user or long use calls for a class 4 part. Class ratings differ slightly between sellers, so confirm the load rating on the listing.
Measure before you buy
- Check the cylinder’s top cone and the base opening. Most gaming chairs use a standard cylinder with a 50 mm outer tube that sits in the base and a 28 mm tapered top that fits the seat mechanism, but not every chair does.
- Measure the length of the cylinder from the seat plate to the bottom, and the stroke.
- Check the chair maker’s replacement parts page. Many gaming chair makers sell the exact part.
- Confirm the load rating of the replacement matches or exceeds your weight.
Steps to replace a gas lift
- Turn the chair upside down on a soft surface or lay it on its back.
- Pull the casters off the base. Most pull out by hand or with pliers. Never pull them by their housing in an unsafe way.
- Pull or tap the cylinder out of the base. Hold the base firmly and tap the top of the cylinder from above with a rubber mallet.
- Remove the cylinder from the seat mechanism by using a pipe wrench or by tapping its cone free. Many cylinders are held by a taper fit, not a screw.
- Insert the new cylinder into the base and press the cone into the seat mechanism.
- Refit the casters, set the chair upright and sit on it firmly to seat the taper.
If the cylinder is stuck, soak the joint with penetrating oil and retry. Do not use heat. If the chair is under warranty, ask the maker to supply a new cylinder.
Wobbly Arms and Loose Seats
A wobbling armrest is usually loose hardware. Armrests commonly attach with two to four screws from underneath the seat. Turn the chair over, tighten the bolts with the correct Allen key or screwdriver and replace any stripped screws. If the plastic mounting surface is cracked, the armrest or mount will need replacing, and makers sell spare parts for popular models.
A leaning seat can be a loose bolt between the mechanism plate and the seat, or a bent or cracked plate. Retighten the bolts. If the plate is bent, stop using the chair and replace the mechanism.
Tilt Lock and Recline Problems
If the chair will not lock at your chosen angle or tilts without being asked, check these in order:
- Locate the tilt control lever or knob and move it through its full range. Some models have a tension knob under the seat that sets the spring tension.
- Tighten any loose screws on the mechanism plate.
- Check for dirt, hair or stiff grease around moving parts and clean them.
- Apply a small amount of lubricant such as silicone spray to the pivot points, keeping it off upholstery.
- If the mechanism itself is bent, cracked or the lock does not engage, replace it using the maker’s part or a compatible one.
Mechanism replacement involves unscrewing the seat plate and cylinder interface. Take photos before disassembly, and keep screws sorted.
Caster Swap: Quick Win
Casters are the easiest repair. Most gaming chairs use standard stem casters that pull out of the base. Measure the stem diameter and length. Common stem sizes are 11 mm (7/16 inch) on many North American chairs and 10 mm on many European ones, so check yours. Choose hard wheels for carpet and soft rubber wheels for hard floors, which also protect wood and tile. Replacement casters usually fit by pressing them in firmly.
Peeling PU Leather
PU leather degrades from heat, humidity, skin oils, sunlight and wear, and eventually the surface layer flakes. It cannot be reversed, but you can slow it and cover it.
- Clean with a mild soap and a soft cloth and avoid harsh solvents.
- Stop using alcohol wipes and strong cleaners on the surface.
- Small areas can be covered with a repair patch or sticker kit made for vinyl and PU.
- Seat covers, such as a fitted fabric cover, hide damage and protect the seat.
- For a full repair, send the chair to an upholsterer or buy a replacement seat cover from the maker if offered.
Persistent peeling in the first year or two may be a warranty matter, so contact the maker with photos before you attempt a repair.
Other Common Fixes
Squeaks and creaks
Squeaking usually comes from dry pivot points or loose bolts. Tighten fasteners, then apply a small amount of lubricant to metal-on-metal joints.
Flat or sagging foam
Foam compresses over time. Some makers sell replacement seat cushions. A thin foam topper can help temporarily, but it will not restore support.
Wobbly base
Make sure the base legs are fully seated and that the casters are all the same type. A cracked base is not repairable and should be replaced.
Tools and Parts to Gather
- Allen keys and a Phillips screwdriver, usually supplied with the chair, so keep the original set if you still have it.
- A rubber mallet, pipe wrench or large pliers for the gas lift and casters.
- Penetrating oil and silicone lubricant for stuck or squeaking parts.
- Safety glasses, work gloves and a blanket or cardboard to protect the floor and upholstery.
- Spare bolts, washers and thread-locking compound if a bolt keeps working loose. Use a medium-strength product so the part can be removed later.
- Your chair’s model name and order number, which the maker needs to supply the correct spare part.
Photograph each stage as you take the chair apart. Keep screws in labelled containers, because gaming chairs often use different lengths in similar looking holes, and a long screw in the wrong place can damage the seat or the mechanism.
Repair or Replace?
| Fault | Repair | Replace the chair |
|---|---|---|
| Gas lift sinks | Yes, replace the cylinder | Only if the mechanism is also damaged |
| Loose armrest | Yes | No |
| Casters worn | Yes | No |
| Peeling leather | Cover or reupholster | If the whole chair is worn |
| Cracked base or mechanism plate | Replace the part if available | Often, for safety |
| Foam gone flat | Cushion or replacement seat | If the frame is also worn |
Frequently Asked Questions
Why does my gaming chair keep sinking?
The gas cylinder has lost pressure or its seal has worn. The fix is a replacement class 4 cylinder, or a warranty claim if the chair is still covered.
Can I replace the gas lift on a gaming chair myself?
Yes, on most chairs, with basic tools. Remove the casters, knock the cylinder out of the base and free it from the mechanism. Never cut or heat the cylinder, and contact the maker if you are unsure.
What size gas lift do I need?
Most standard chairs take a common taper-fit cylinder, and class 4 is the grade makers usually list for gaming chairs. Measure the length and cone, and check the chair’s parts page.
How do I stop my gaming chair from peeling?
You cannot stop PU leather from ageing, but you can slow it. Clean gently, keep the chair out of direct sunlight and avoid harsh chemicals, then use a cover once flaking starts.
Is it worth fixing a cheap gaming chair?
Casters and loose screws are cheap and worth fixing. A cracked base or heavily worn foam may not be worth the time, so decide based on safety.
Is a collapsing gas lift dangerous?
It can be, because a sudden drop can cause injury and a faulty cylinder can fail unexpectedly. Stop using the chair until the part is replaced.






