Hello Neighbor: PC System Requirements & Best Hardware to Run It (2026)

Hello Neighbor is not a demanding PC game in 2026. Built in Unreal Engine 4 as a stealth-horror title with stylized graphics and relatively small, loading-screen-separated house levels, it runs well on almost any modern gaming PC and even on budget integrated graphics. Any entry-level dedicated GPU from the last 6-7 years or a current integrated GPU like AMD Radeon 780M or Intel Arc integrated will handle 1080p at 60 FPS easily, while a modest mid-range build is already overkill for high refresh rates or higher resolutions.

As an Amazon Associate we earn from qualifying purchases at no extra cost to you.

#1 Pick

ASUS ROG G700 (2026) Gaming Desktop PC, Intel® Core™ Ultra 7 265KF Processor, NVIDIA® GeForce RTX™ 5070, 1TB M.2 NVMe™ PCIe® 4 SSD, 16GB DDR5 RAM, Windows 11 Home, G700TF-DB774

Check Price on Amazon →

#2 Pick

ASUS ROG G700 (2025) Gaming Desktop PC, Intel® Core™ Ultra 7 265F Processor, NVIDIA® GeForce RTX™ 5070, 1TB M.2 NVMe™ PCIe® 4 SSD, 32GB DDR5 RAM, Windows 11 Pro, G700TF-XS776

Check Price on Amazon →

#3 Pick

ASUS ROG GM700 (2025) Gaming Desktop PC, AMD Ryzen™ 7 9800X3D Processor, AMD® Radeon™ RX 9070 XT Prime OC, 2TB M.2 NVMe™ PCIe® 4 SSD, 32GB DDR5 RAM, Windows 11 Home, GM700TZ-MS777

Check Price on Amazon →

#4 Pick

Asus ROG GM700 GM700TZ-PB564 Gaming Desktop Computer – AMD Ryzen 5 8400F – 16 GB – 1 TB PCI Express NVMe 4.0 SSD – Black

Check Price on Amazon →

Hello Neighbor Minimum and Recommended PC Requirements

The requirements below are approximate, based on the publisher’s store page on Steam. Dynamic Pixels / tinyBuild has not updated the official specs significantly since launch, so they reflect the original 2017 release target hardware.

In practice, these specs are very low by 2026 standards. The GTX 770 and R9 280X are over a decade old, and the 6-8 GB RAM requirement is below what any new gaming PC ships with today. You do not need a high-end CPU or GPU for this game — even the minimum spec target is easily exceeded by current budget hardware.

How Demanding Is Hello Neighbor in 2026?

Hello Neighbor is a CPU-light, GPU-light game with no large open world, no ray tracing, and no complex physics simulation beyond the neighbor’s AI and basic object interactions. The three main acts take place in and around a single house and basement, so there is very little world streaming or asset loading during gameplay.

That means performance is limited almost entirely by your GPU’s basic rasterization power, and even that limit is low. On modern hardware, the game is typically capped by your monitor’s refresh rate or an in-engine frame cap rather than hardware power. Stuttering is rare unless you are running on a hard drive or a system with very limited RAM, and thermal throttling is generally not an issue due to the low overall load.

For a new PC in 2026, Hello Neighbor should be considered a 1080p 60+ FPS game on integrated graphics, and a 1080p 144+ FPS game on any discrete GPU.

Best GPU for Hello Neighbor by Resolution

You do not need to buy a GPU specifically for Hello Neighbor, but if you are building or upgrading a PC and want to know what to expect, these general tiers are accurate for the final release version with all patches applied.

1080p (Full HD)

This is the ideal resolution for Hello Neighbor and where most players will play. The art style scales cleanly and the UI is designed for 1080p.

• Integrated Graphics (AMD Radeon 780M, 760M, Intel Arc Graphics, Intel UHD 770): Expect approximately 45-75 FPS on medium to high settings, based on aggregated results from public outlets like TechPowerUp and TechSpot testing of similar Unreal Engine 4 titles. Lowering view distance and shadows to medium locks 60 FPS on most modern APUs and handheld chips.
• Entry Discrete GPUs (NVIDIA GTX 1650, GTX 1660, RTX 3050 6GB, AMD RX 6400, RX 6500 XT, Intel Arc A380): Expect approximately 90-150+ FPS on ultra settings at 1080p. This class is already far beyond the recommended GTX 1060 and will not drop below 60 FPS in any act.
• Mainstream GPUs (NVIDIA RTX 4060, RTX 3060, AMD RX 7600, RX 6600): Expect approximately 150-240+ FPS on ultra. You will be fully CPU or engine-limited here, which is ideal for high-refresh 1080p monitors.

1440p (QHD)

Hello Neighbor has no high-resolution texture pack, so 1440p just provides a sharper, cleaner image with no extra VRAM cost. Any mainstream GPU from the last three generations is sufficient.

• RTX 3060 / RX 6600 / Arc A580 or better: Approximately 100-170 FPS on ultra settings. Public benchmark archives from Tom’s Hardware and Hardware Unboxed on UE4 games in this performance tier show this range is typical for this class at 1440p.
• RTX 4060 Ti / RX 7600 XT / RTX 4060 and above: Approximately 144-200+ FPS, easily enough for 144Hz displays.

4K (Ultra HD)

4K is playable but unnecessary for Hello Neighbor’s stylized visuals. VRAM usage stays under 2.5 GB even at 4K ultra, so 4K performance is about raw GPU power.

• Mid-Range (RTX 4070, RX 7800 XT): Approximately 90-140 FPS on ultra at 4K.
• High-End (RTX 4070 Super, RTX 4080, RX 7900 XT): Approximately 140-200+ FPS, exceeding what the engine usefully displays.

There is no DLSS, FSR, or XeSS support natively in Hello Neighbor, so you will be running at native resolution. The game is so light that upscaling is not needed.

CPU, RAM and Storage Notes for Hello Neighbor

CPU

Hello Neighbor is not CPU-intensive. The neighbor’s AI pathfinding and learning behavior is the only notable CPU task, and it runs on a single thread. Any modern 4-core / 8-thread CPU or better will not bottleneck the game.

Recommended minimum in 2026: Intel Core i3-10100F / i3-12100F, AMD Ryzen 3 3100 / Ryzen 5 5600G, or newer. Even older quad-cores like the i5-8400 or Ryzen 5 2600 are more than enough for 100+ FPS. You do not need a modern 6-core or 8-core CPU for this title, though those chips are now common in budget builds and will handle background tasks like Discord and streaming with no impact.

RAM

The official 8 GB recommendation is accurate, but 16 GB is the standard for any gaming PC in 2026 and leaves more headroom for Windows 11 and browser tabs. The game itself uses about 3-4 GB of system RAM during gameplay.

Speed matters very little here. DDR4-3200 or DDR5-5600 is fine. Dual-channel (2 sticks) is preferred over single-channel, especially if you are playing on integrated graphics, where memory bandwidth directly affects FPS.

Storage

Hello Neighbor only requires about 5 GB of free space. The type of drive affects load times more than FPS. On a hard drive, initial loads between acts can take 15-25 seconds. On any SATA or NVMe SSD, which every modern PC should use, loads drop to 3-7 seconds and micro-stutter when entering the basement is eliminated. There is no need for a high-end PCIe 4.0 or 5.0 drive for this game — a basic 512GB or 1TB SATA SSD is already optimal.

Example PC Builds for Hello Neighbor in 2026

Prices are general ranges for new parts in 2026, excluding peripherals and OS. Hello Neighbor does not justify a high-end build on its own — these examples are balanced PCs that also handle modern games well.

Budget Build – For 1080p 60+ FPS on Ultra

General price range: $450 – $600 for the tower. Ideal if Hello Neighbor and similar indie / esports titles are your main games.

• CPU: AMD Ryzen 5 5600G or Intel Core i3-12100F
• GPU: Integrated Radeon 780M / UHD 770, or add an entry card like NVIDIA GTX 1650 / AMD RX 6400 / Intel Arc A380 if you want dedicated graphics
• RAM: 16GB (2x8GB) DDR4-3200
• Storage: 512GB NVMe SSD

This system exceeds the recommended specs by a wide margin and will run Hello Neighbor at 75-120 FPS on high-ultra, plus lighter modern games at 1080p 60 FPS.

Balanced 1080p / 1440p Build – For 144+ FPS and Future Games

General price range: $750 – $1000 for the tower. This is the sweet spot for a new gaming PC in 2026 that plays Hello Neighbor effortlessly while also handling AAA releases.

• CPU: Intel Core i5-12400F / i5-14400F or AMD Ryzen 5 5600 / Ryzen 5 7600
• GPU: NVIDIA RTX 4060 / RTX 3060 or AMD Radeon RX 7600 / RX 6700 XT
• RAM: 16GB (2x8GB) DDR4-3600 or DDR5-5600
• Storage: 1TB NVMe SSD

Expect 144-240+ FPS in Hello Neighbor at 1080p ultra and 100+ FPS at 1440p ultra, with power to spare for streaming, mods, and newer titles.

Laptop and Handheld Compatibility: Steam Deck, ROG Ally and More

Hello Neighbor is an excellent fit for laptops and handhelds and is verified as Playable/Verified on Steam Deck.

• Gaming Laptops: Any laptop with a GTX 1650, RTX 2050, RTX 3050 Laptop, or Radeon 6600M or better will run the game at 60+ FPS on high-ultra. Even thin-and-light laptops with AMD Ryzen 7 7840U / 8840U or Intel Core Ultra 7 155H integrated graphics will maintain 60 FPS at 1080p medium-high.
• Steam Deck (LCD and OLED): Runs at a locked 60 FPS at native 1280×800 on high settings with no adjustments needed, plus 3-5 hours of battery life due to the low power draw. Based on community performance reports and handheld testing from outlets like Gamers Nexus, drops below 55 FPS are rare.
• ASUS ROG Ally / Lenovo Legion Go / MSI Claw: All achieve 60-90 FPS at 1080p high settings. On the ROG Ally Z1 Extreme, you can run at 1080p ultra above 75 FPS in Turbo mode or cap to 60 FPS at 15W for quieter operation.

For all handhelds, use the native resolution and cap the frame rate to 60 FPS to save battery — you will not notice a difference in this type of game.

Best Settings to Raise FPS in Hello Neighbor

If you are on integrated graphics or an older low-end GPU and want more performance, these settings give the biggest gains with the least visual loss. Hello Neighbor’s options menu is simple, so changes are immediate.

• Shadows – Set to Medium or Low: The largest FPS gain in the game. Hello Neighbor uses dynamic shadows around the house and forest that are expensive to render. Lowering shadows can improve FPS by 15-25% with very little noticeable difference during stealth gameplay, especially indoors.
• View Distance – Set to Medium: Controls how far trees, fences, and distant house details are rendered. On high/ultra, the game draws the entire neighborhood at once. Medium hides almost no critical detail but saves GPU load, particularly outdoors in Act 1 and 3.
• Post Processing – Set to Medium: Controls bloom, ambient occlusion, and subtle blur effects. Lowering this reduces GPU load during night sequences and basement scenes with minimal impact on clarity. High post processing can also make it harder to spot hidden items.
• V-Sync – Turn Off (and use driver-level cap instead): The in-game V-Sync adds noticeable input lag, which hurts timing when sneaking and escaping the neighbor. Turn it off and if you see screen tearing, cap FPS to your monitor’s refresh rate in the NVIDIA Control Panel or AMD Software instead.

Texture Quality and Effects Quality have almost no FPS impact on 4GB+ GPUs, so leave them on High or Ultra. Anti-aliasing should stay on — turning it off creates jagged edges on the house’s wooden geometry without a significant performance benefit.

Frequently Asked Questions

Can Hello Neighbor run on a low-end PC or without a graphics card?

Yes. Any PC built in the last 4-5 years with integrated graphics from AMD (Ryzen 5000G/7000 series) or Intel (11th Gen and newer) can run Hello Neighbor at 1080p 45-60+ FPS on medium-high settings. You do not need a dedicated graphics card.

How much RAM do I need for Hello Neighbor?

8 GB is the minimum for smooth play, 16 GB is ideal in 2026. The game itself uses under 4 GB, but 16 GB prevents stutter from background apps and is now the baseline for Windows 11 gaming PCs.

Does Hello Neighbor need an SSD?

No, but it is strongly recommended. The game runs on a hard drive, but an SSD cuts act loading times by more than half and prevents brief hitches when the neighbor is chasing you between floors.

Is Hello Neighbor well optimized?

Generally yes. It is a small-scale Unreal Engine 4 game with no major optimization issues on PC. Patches after launch fixed early performance drops, and in 2026 it runs stably on a wide range of hardware without requiring tweaks.