BODYCAM: PC System Requirements & Best Hardware to Run It (2026)

Thinking about playing BODYCAM on PC and wondering what hardware you actually need? BODYCAM launched in Early Access on June 7, 2024 as a tactical multiplayer FPS built in Unreal Engine 5, and it renders every match through a true body-camera view: photoreal maps, close-quarters firefights that feel raw and loud, and Deathmatch, Team Deathmatch and Wingman modes where every angle, callout and bullet matters. The good news is that its published requirements are far more modest than that photoreal look suggests — the official recommended spec is an RTX 3060 (12 GB) or RX 6600 XT with 16 GB of RAM, hardware that has been mainstream for years. This guide breaks down the official PC requirements for BODYCAM, the best GPU for each resolution, and complete build recommendations to hit your target frame rate.

How Demanding Is BODYCAM?

BODYCAM is moderately demanding rather than punishing. The official minimum is an NVIDIA GeForce RTX 2070 or AMD Radeon RX 5700 with 8 GB of VRAM plus 8 GB of system RAM, and the official recommended spec is an RTX 3060 (12 GB) or RX 6600 XT with 16 GB of RAM — mid-range cards that a great many gaming PCs already have. In practical terms, that makes 1080p the natural target for modest hardware, with 1440p and 4K asking for progressively stronger graphics cards. The photoreal Unreal Engine 5 presentation means the GPU does most of the work, and because matches are close-quarters, small-team affairs rather than large-scale battles, the CPU side is undemanding: a mid-range processor from the last few years comfortably clears the recommended Ryzen 7 3800X. The developer also recommends installing the game on an SSD, and the installation itself takes up 50 GB.

BODYCAM Official PC System Requirements

Source: the official Bodycam Steam store listing (app 2406770), checked October 2026. Publishers can update these specs after patches.

Those are the published figures, and they are worth reading literally: 8 GB of RAM and an RTX 2070 / RX 5700 will get you into the game at 1080p, while 16 GB and an RTX 3060 (12 GB) / RX 6600 XT is the configuration the developer points to for a comfortable experience. BODYCAM is still in Early Access, so the requirements can shift as the game is updated.

Best GPU for BODYCAM by Resolution

1080p

1080p is where BODYCAM is most at home. The official minimum — an RTX 2070 or RX 5700 — is already a 1080p-class card, and the recommended RTX 3060 (12 GB) / RX 6600 XT sits a step above it. The NVIDIA GeForce RTX 4060 is a straightforward upgrade over that recommended tier, and current-generation cards such as the NVIDIA GeForce RTX 5060 or AMD Radeon RX 9060 XT land in the same bracket: more than enough for high settings at 1080p. Older cards that still meet or beat the official spec — an RTX 2070, RTX 3060, RX 5700 or RX 6600 XT — handle this resolution fine, and enabling upscaling (DLSS, FSR or the engine’s temporal upscaler, where available) gives you extra headroom if you want it.

1440p

1440p is a step beyond the official recommended spec, so you want a card comfortably above the RTX 3060 / RX 6600 XT tier. The NVIDIA GeForce RTX 4070 SUPER handles 1440p at high settings with room to spare, and current-generation equivalents such as the NVIDIA GeForce RTX 5070 or AMD Radeon RX 9070 occupy the same performance class. Older options that still clear the bar include the RTX 3070 and RTX 3080 or the RX 6700 XT and RX 6800. This is the resolution most PC gamers target, and this class of card is the point where BODYCAM stops feeling like a compromise.

4K

4K is the one resolution where BODYCAM genuinely asks a lot. Nothing in the official requirements is aimed at 4K, so treat it as a step beyond the recommended numbers. The NVIDIA GeForce RTX 4080 SUPER is a realistic entry point, with current-generation cards such as the NVIDIA GeForce RTX 5070 Ti or 5080 and the AMD Radeon RX 9070 XT in the same territory. Upscaling helps enormously here — running 4K native with everything maxed is the heaviest way to play BODYCAM, so a top-tier card plus an upscaler makes the biggest difference.

CPU, RAM and Storage for BODYCAM

The official CPU requirement is an AMD Ryzen 7 3700X or Intel Core i7-9700K at minimum, with a Ryzen 7 3800X or Core i7-10700K recommended — desktop chips that are modest by today’s standards. In other words, BODYCAM is not a CPU-hungry game: its close-quarters modes put the load on the graphics card, and almost any modern six-core processor clears the recommended bar. If you are building fresh, the AMD Ryzen 5 7600 is far more than this game needs and excellent value, while the AMD Ryzen 7 7800X3D is the fastest mainstream gaming CPU and complete overkill here. Intel builders can look at the Intel Core i5-14600K, which also sits well above the official recommendation. For memory, 16 GB is the official recommendation and 8 GB is the minimum, so 16 GB of DDR5 is the sensible target; a Corsair Vengeance DDR5 32GB kit gives you more than BODYCAM will use but leaves room for background apps. Storage is straightforward: the game needs 50 GB of space and the developer recommends an SSD, so a fast NVMe drive like the Samsung 990 Pro 2TB NVMe SSD keeps load times short and helps avoid streaming stutter.

Recommended PC Builds for BODYCAM

1080p budget build: NVIDIA GeForce RTX 4060 + AMD Ryzen 5 7600 + 16 GB DDR5 — comfortably above the official recommended spec, and great for high-settings 1080p.

1440p sweet-spot build: NVIDIA GeForce RTX 4070 SUPER + AMD Ryzen 7 7800X3D + 32 GB DDR5 + 2TB NVMe SSD — the setup most players should aim for if they want 1440p with headroom, though the CPU here is far beyond what BODYCAM actually needs.

4K high-end build: NVIDIA GeForce RTX 4080 SUPER + AMD Ryzen 7 7800X3D + 32 GB DDR5 + fast NVMe SSD — for 4K, where upscaling is doing a lot of the work.

Is It Worth Upgrading Your PC for BODYCAM?

Because BODYCAM’s requirements are modest, it is rarely a reason to rebuild an entire system. If you are running a card below the official minimum — an older GTX 10-series or an entry-level RX 5000-series GPU — moving to something in the RTX 3060 / RX 6600 XT class, or a current-generation RTX 5060 / RX 9060 XT, is the single biggest improvement you can make, since the graphics card carries most of the load here. On the CPU side, any modern six-core chip from the last few years already beats the recommended Ryzen 7 3800X, so there is usually nothing to do there. Going from 8 GB to 16 GB of RAM is a cheap upgrade if you are below the recommended figure, and moving the game onto an SSD is worthwhile given the developer recommends one. Rather than replacing everything at once, target the weakest link in your build for the best value.

Can You Play BODYCAM on a Laptop or Handheld?

Yes on a gaming laptop, with caveats. A discrete laptop GPU in the RTX 4060 class is broadly comparable to the recommended desktop RTX 3060 / RX 6600 XT, so it can run BODYCAM at 1080p with sensible settings — expect more heat, more fan noise and shorter battery life than a desktop, and make sure the laptop has a discrete GPU rather than integrated graphics. Handhelds are a different story: the integrated graphics in devices like the Steam Deck or the ROG Ally sit well below the official minimum of an RTX 2070 or RX 5700, so BODYCAM on a handheld means low settings with upscaling enabled, and results vary from device to device. If portability matters, prioritise a device with a capable discrete GPU and pair it with fast storage.

How to Boost FPS in BODYCAM

If frame rates are low, start with upscaling: enabling DLSS on NVIDIA, FSR on AMD or the equivalent temporal upscaler in the game (where available) is usually the single biggest performance gain. Next, reduce the most expensive visual options — shadow quality, post-processing and effects — before dropping resolution, since BODYCAM leans on the GPU and those settings cost the most. Keep your graphics drivers up to date, close background applications, and make sure the game is installed on an SSD as the developer recommends. And remember that the official minimum exists for a reason: if you are below an RTX 2070 / RX 5700, tuning settings to reach a stable frame rate will feel better than chasing maxed-out visuals.

Frequently Asked Questions

Can my PC run BODYCAM?

If your PC meets the official minimum — an NVIDIA GeForce RTX 2070 or AMD Radeon RX 5700 (8 GB), an AMD Ryzen 7 3700X or Intel Core i7-9700K, 8 GB of RAM, broadband internet and 50 GB of free space on an SSD — it can run BODYCAM. For the configuration the developer recommends, aim for an RTX 3060 (12 GB) or RX 6600 XT, a Ryzen 7 3800X or Core i7-10700K, and 16 GB of RAM.

Is BODYCAM demanding on PC?

Moderately. It is a photoreal Unreal Engine 5 game viewed through a body camera, so it looks heavier than it actually is, but the official recommended spec — an RTX 3060 (12 GB) or RX 6600 XT with 16 GB of RAM — is mainstream mid-range hardware rather than high-end. It is not one of the most punishing titles on PC.

What GPU do I need for BODYCAM at 1440p 60fps?

1440p sits above the official recommended card, so you want something clearly faster than an RTX 3060 / RX 6600 XT. A NVIDIA GeForce RTX 4070 SUPER-class graphics card is the sweet spot for high-settings 1440p, and current-generation cards such as the RTX 5070 or RX 9070 sit in the same bracket. Cards in this tier give you comfortable headroom for future titles too.

How much RAM does BODYCAM need?

The official minimum is 8 GB and the official recommended figure is 16 GB, so 16 GB is the practical target for BODYCAM. Faster DDR5 memory helps a little in busy scenes, but the amount matters more than the speed here — treat 8 GB as a floor rather than a goal.

Do I need an SSD for BODYCAM?

The developer recommends an SSD, and BODYCAM needs 50 GB of free space. An NVMe drive like the Samsung 990 Pro is a good fit and keeps load times short.