Thinking about playing Star Wars Jedi: Survivor on PC and wondering what hardware you actually need? Released on 27 April 2023, Star Wars Jedi: Survivor is a single-player action-adventure, and its official PC requirements are those of a modern AAA game rather than a lightweight one: both the minimum and recommended tiers call for a graphics card with 8 GB of VRAM, and the install weighs in at 155 GB. The encouraging part is that those targets were set in 2023, so today’s mainstream mid-range hardware clears them without much effort. This guide breaks down the official PC system requirements for Star Wars Jedi: Survivor, the best GPU for each resolution, and complete build recommendations to hit your target frame rate.
How Demanding Is Star Wars Jedi: Survivor?
Star Wars Jedi: Survivor sits in the middle of the road as modern PC games go. It is not a lightweight indie title — the official minimum asks for a GTX 1070 or RX 580 with 8 GB of VRAM, 8 GB of RAM and 155 GB of storage — but it is also not one of the punishing ports that need a flagship card. The recommended tier tops out at an RTX 2070 or RX 6700 XT, which were mid-range parts when the game launched and are comfortably beaten by current-generation cards. The detail worth paying attention to is memory: both tiers specify 8 GB of VRAM, so older 4 GB and 6 GB cards fall short even when their raw performance looks reasonable on paper. There is no online multiplayer component, so the processor demand is an ordinary single-player workload rather than anything driven by many simultaneous players.
Star Wars Jedi: Survivor Official PC System Requirements
| Component | Minimum (official) | Recommended (official) |
|---|---|---|
| OS | Windows 10 64-bit | Windows 10 64-bit |
| Processor | 4 core / 8 threads | Intel Core i7-7700 | Ryzen 5 1400 | 4 core / 8 threads | Intel Core i5 11600K | Ryzen 5 5600X |
| Memory | 8 GB RAM | 16 GB RAM |
| Graphics | 8GB VRAM | GTX 1070 | Radeon RX 580 | 8GB VRAM | RTX2070 | RX 6700 XT |
| DirectX | Version 12 | Version 12 |
| Storage | 155 GB available space | 155 GB available space |
Source: the official STAR WARS Jedi: Survivor™ Steam store listing (app 1774580), checked October 2026. Publishers can update these specs after patches.
Best GPU for Star Wars Jedi: Survivor by Resolution
1080p
The official recommended tier — an RTX 2070 or RX 6700 XT — is a 1080p target, so that is the baseline to beat. The NVIDIA GeForce RTX 4060 is a good modern pick: it matches the 8 GB of VRAM the game asks for and handles high settings at 1080p with room to spare, as do current alternatives such as the RTX 5060 or the RX 9060 XT. On the older side, anything at GTX 1070 or RX 580 8 GB level or above meets the published minimum.
1440p
Step up to the NVIDIA GeForce RTX 4070 SUPER for high-refresh 1440p at high or ultra settings. That card sits a clear tier above the official recommendation, which is exactly what this resolution asks for, and current-generation equivalents such as the RTX 5070 or RX 9070 will do the same job. This is the resolution most PC gamers target, and this class of card gives Star Wars Jedi: Survivor plenty of headroom.
4K
For 4K, the NVIDIA GeForce RTX 4070 Ti SUPER is a realistic entry point, and cards in that bracket or above — including the RTX 5070 Ti, RTX 5080 and RX 9070 XT — are the sensible targets. 4K is a stretch for any modern AAA title, so plan on upscaling (DLSS on NVIDIA, FSR on AMD) to keep frame rates high. The official requirements say nothing about 4K, so treat this tier as headroom rather than a published target.
CPU, RAM and Storage for Star Wars Jedi: Survivor
The official CPU figures are modest, and they tell you something useful: both tiers specify a 4-core / 8-thread processor, from an Intel Core i7-7700 or AMD Ryzen 5 1400 at the minimum up to an Intel Core i5-11600K or AMD Ryzen 5 5600X at the recommended level. This is a single-player action-adventure rather than a simulation, strategy or large-scale multiplayer game, so it does not scale far beyond that — per-core performance matters more than core count. If you are building new, the AMD Ryzen 5 7600 comfortably clears the recommended bar, while the AMD Ryzen 7 7800X3D is more processor than this game strictly needs but leaves room for anything else you play. Intel buyers can consider the Intel Core i5-14600K.
Memory is straightforward: 8 GB is the official minimum and 16 GB is the recommended figure, so 16 GB of DDR5 is the practical target, with a 32 GB kit such as the Corsair Vengeance DDR5 32GB covering it with room to spare. Storage is the other number to plan around — 155 GB of available space. An SSD is not listed as a hard requirement, but with an install that size a fast NVMe drive like the Samsung 990 Pro 2TB NVMe SSD is the sensible choice and keeps load times down.
Recommended PC Builds for Star Wars Jedi: Survivor
1080p budget build: NVIDIA GeForce RTX 4060 + AMD Ryzen 5 7600 + 16 GB DDR5 — comfortably above the official minimum and around the recommended tier, which is plenty for high-settings 1080p.
1440p sweet-spot build: NVIDIA GeForce RTX 4070 SUPER + AMD Ryzen 7 7800X3D + 32 GB DDR5 + 2TB NVMe SSD — well beyond the published requirements, and the setup most players should aim for at 1440p high settings.
4K high-end build: NVIDIA GeForce RTX 4070 Ti SUPER + AMD Ryzen 7 7800X3D + 32 GB DDR5 + fast NVMe SSD — for 4K with upscaling enabled.
Is It Worth Upgrading Your PC for Star Wars Jedi: Survivor?
Because the official requirements are 2023 mid-range targets, upgrading specifically for Star Wars Jedi: Survivor is rarely necessary unless your card falls below the 8 GB VRAM floor or is several generations old. If you do upgrade, the graphics card delivers the biggest jump in gaming performance, so start there. The processor is a lower priority — a 4-core / 8-thread chip in the i7-7700 or Ryzen 5 1400 class is the published minimum, and anything more modern will not hold the game back. Moving from 8 GB to 16 GB of RAM and installing the game on an SSD are cheap changes that noticeably smooth out the experience. Rather than replacing everything at once, target the weakest link in your build for the best value.
Can You Play Star Wars Jedi: Survivor on a Laptop or Handheld?
Gaming laptops with a current mid-range mobile GPU can run Star Wars Jedi: Survivor, though expect more heat and shorter battery life than a desktop, and check that the laptop’s card has at least 8 GB of VRAM to match the official requirement. On handhelds such as the Steam Deck or ROG Ally, the game is a much harder fit: it is a full-scale AAA title with a 155 GB install, so expect to lean on low settings and aggressive upscaling, and to need a large SSD rather than a small memory card. If portability matters, prioritise a device with a capable GPU and generous fast storage.
How to Boost FPS in Star Wars Jedi: Survivor
If frame rates are lower than you would like, enable upscaling (DLSS on NVIDIA, FSR on AMD, XeSS on Intel), which offers the single biggest performance gain, and turn on frame generation if the game and your GPU support it. Beyond that, drop the most expensive settings first — shadows, volumetric effects and post-processing are usually the heaviest — before lowering overall resolution. Keep your GPU drivers up to date, close background apps, and make sure the game is installed on an SSD. Lowering settings to hit a stable frame rate almost always feels better than chasing maxed-out visuals with stutter.
Frequently Asked Questions
Can my PC run Star Wars Jedi: Survivor?
If your PC has at least a GTX 1070 or RX 580 (8 GB), a 4-core / 8-thread processor such as an i7-7700 or Ryzen 5 1400, 8 GB of RAM and 155 GB of free space, it meets the official minimum. For the recommended experience, aim for an RTX 2070 or RX 6700 XT-class card, a CPU in the i5-11600K or Ryzen 5 5600X class, and 16 GB of RAM.
Is Star Wars Jedi: Survivor demanding on PC?
It is a modern AAA action-adventure rather than a lightweight game — the 8 GB VRAM requirement and the 155 GB install are real — but the recommended hardware is 2023-era mid-range, so current mainstream cards handle it comfortably at 1080p and 1440p.
What GPU do I need for Star Wars Jedi: Survivor at 1440p 60fps?
A NVIDIA GeForce RTX 4070 SUPER-class graphics card is the sweet spot for high-settings 1440p in Star Wars Jedi: Survivor, especially with upscaling enabled. It sits well above the official recommended RTX 2070 / RX 6700 XT, which is the headroom you want at this resolution.
How much RAM does Star Wars Jedi: Survivor need?
8 GB is the official minimum and 16 GB is the official recommended figure. 16 GB is the practical target for a smooth experience, and faster DDR5 memory is a nice-to-have rather than a requirement.
Do I need an SSD for Star Wars Jedi: Survivor?
An SSD is not listed in the official requirements, but with a 155 GB install it is strongly recommended. An NVMe drive like the Samsung 990 Pro keeps load times short and streaming smooth.
