Thinking about playing Monster Hunter Wilds on PC and wondering what hardware you actually need? The game arrived on February 27, 2025, and it’s a large-scale open-world hunting action game that leans hard on upscaling to reach smooth frame rates — the official minimum spec is written around 1080p upscaled from a 720p native render at 30 fps on the “Lowest” preset, which tells you a lot about how it scales. Getting the right graphics card, CPU and memory is what separates a smooth hunt from a stuttery one. This guide breaks down the official PC requirements for Monster Hunter Wilds, the best GPU for each resolution, and complete build recommendations for your target frame rate.
- How Demanding Is Monster Hunter Wilds?
- Monster Hunter Wilds Official PC System Requirements
- Best GPU for Monster Hunter Wilds by Resolution
- CPU, RAM and Storage for Monster Hunter Wilds
- Recommended PC Builds for Monster Hunter Wilds
- Is It Worth Upgrading Your PC for Monster Hunter Wilds?
- Can You Play Monster Hunter Wilds on a Laptop or Handheld?
- How to Boost FPS in Monster Hunter Wilds
- Frequently Asked Questions
How Demanding Is Monster Hunter Wilds?
Monster Hunter Wilds is a demanding modern release, and its own published specs say so. The official minimum — a GeForce GTX 1660 with 6 GB of VRAM or a Radeon RX 5500 XT with 8 GB — is only rated for 1080p upscaled from a 720p native render at 30 fps on the “Lowest” graphics setting. The recommended tier — RTX 2060 Super 8 GB or RX 6600 8 GB — targets 1080p at 60 fps on the “Medium” setting, and that figure assumes Frame Generation is enabled. So the floor is genuinely a low-preset, upscaled experience, and the recommended 60 fps target comes with a frame-generation assist rather than from raw rendering power alone.
Two details are worth noting. Both tiers list 16 GB of RAM, an SSD and 75 GB of available storage, and both list exactly the same processor — Intel Core i5-10400 or Core i3-12100, or AMD Ryzen 5 3600. That means the graphics card is the part that actually moves you between the two tiers; this isn’t a game whose published requirements single out the CPU. The game also supports DirectStorage, so a fast NVMe drive is the sensible pairing.
Monster Hunter Wilds Official PC System Requirements
The table below lists the officially published requirements for the game, exactly as they’re stated.
| Component | Minimum (official) | Recommended (official) |
|---|---|---|
| OS | Windows®10 (64-bit Required)/Windows®11 (64-bit Required) | Windows®10 (64-bit Required)/Windows®11 (64-bit Required) |
| Processor | Intel® Core™ i5-10400 or Intel® Core™ i3-12100 or AMD Ryzen™ 5 3600 | Intel® Core™ i5-10400 or Intel® Core™ i3-12100 or AMD Ryzen™ 5 3600 |
| Memory | 16 GB RAM | 16 GB RAM |
| Graphics | NVIDIA® GeForce® GTX 1660(VRAM 6GB) or AMD Radeon™ RX 5500 XT(VRAM 8GB) | NVIDIA® GeForce® RTX 2060 Super(VRAM 8GB) or AMD Radeon™ RX 6600(VRAM 8GB) |
| DirectX | Version 12 | Version 12 |
| Storage | 75 GB available space | 75 GB available space |
Source: the official Monster Hunter Wilds Steam store listing (app 2246340), checked October 2026. Publishers can update these specs after patches.
Best GPU for Monster Hunter Wilds by Resolution
1080p
1080p is the only resolution the official requirements actually cover, and the two published tiers tell you where the bar sits. The minimum — GTX 1660 (6 GB) or RX 5500 XT (8 GB) — gets you 1080p upscaled from 720p at 30 fps on the “Lowest” setting. To match the recommended tier (1080p, 60 fps, “Medium”, with Frame Generation enabled) you want an RTX 2060 Super or RX 6600. Above that, the NVIDIA GeForce RTX 4060 clears the recommended spec comfortably and gives you room to raise settings or play without Frame Generation, while the current-generation RTX 5060 and Radeon RX 9060 XT fill the same slot on newer platforms. Older cards such as the GTX 1660 Super, RX 5500 XT, RTX 2060 Super and RX 6600 all still satisfy the published numbers.
1440p
1440p is above what the official requirements describe, so you’re stepping beyond the published targets here and should expect to lean on upscaling. The NVIDIA GeForce RTX 4070 SUPER is a solid pick at this resolution and sits well clear of the recommended tier; the current-generation RTX 5070 and Radeon RX 9070 occupy the same bracket. Because the official 60 fps target assumes Frame Generation, keeping that enabled — or choosing a card with more raw headroom — is the practical way to stay smooth at 1440p.
4K
4K goes well beyond anything the official specs cover, and Monster Hunter Wilds is heavy enough that even strong cards will want upscaling and Frame Generation at this resolution. The NVIDIA GeForce RTX 4070 Ti SUPER is a realistic entry point, with current-generation cards such as the RTX 5070 Ti and above giving you more room to raise settings. Expect to render below 4K natively and let upscaling do the rest.
CPU, RAM and Storage for Monster Hunter Wilds
The official requirements list the same processor at both tiers — an Intel Core i5-10400 or Core i3-12100, or an AMD Ryzen 5 3600 — so anything at that level or better meets the published spec, and the CPU isn’t the component that separates the minimum from the recommended experience. If you’re building fresh there’s no harm in going well beyond it: the AMD Ryzen 5 7600 is excellent value for gaming and comfortably exceeds the requirement, while the AMD Ryzen 7 7800X3D is one of the fastest mainstream gaming CPUs if you want maximum frame rates. Intel builders can opt for the Intel Core i5-14600K.
Memory is straightforward: 16 GB of RAM is the official figure for both the minimum and the recommended requirements, and 8 GB falls below spec. A 32 GB kit such as the Corsair Vengeance DDR5 32GB gives you headroom, but 16 GB is the number to hit. Storage is the one area where the game is strict — an SSD is required, not suggested, and you need 75 GB of available space. DirectStorage is supported, so install Monster Hunter Wilds on a fast NVMe drive like the Samsung 990 Pro 2TB NVMe SSD to keep load times and texture streaming in good shape.
Recommended PC Builds for Monster Hunter Wilds
1080p build: NVIDIA GeForce RTX 4060 + AMD Ryzen 5 7600 + 16 GB DDR5 — comfortably above the official recommended spec, so you can raise settings or run without Frame Generation.
1440p sweet-spot build: NVIDIA GeForce RTX 4070 SUPER + AMD Ryzen 7 7800X3D + 32 GB DDR5 + 2TB NVMe SSD — for playing beyond the published 1080p targets with upscaling enabled.
4K high-end build: NVIDIA GeForce RTX 4070 Ti SUPER + AMD Ryzen 7 7800X3D + 32 GB DDR5 + fast NVMe SSD — for 4K with upscaling and Frame Generation.
Is It Worth Upgrading Your PC for Monster Hunter Wilds?
Whether you need to upgrade depends on how far below the official spec you are. If your graphics card is weaker than a GTX 1660 or RX 5500 XT, you’re under the minimum and a GPU upgrade is the only route to a playable experience. If you’re sitting around the recommended RTX 2060 Super / RX 6600 tier, you already meet the published target of 1080p at 60 fps with Frame Generation.
The GPU is the place to spend, because the official requirements use the same CPU at both tiers — the graphics card is what the game scales with. That said, you can’t ignore the rest: 16 GB of RAM is the official baseline, so if you’re on 8 GB that’s a genuine gap, and the SSD requirement means a mechanical drive isn’t an option. If you already have 16 GB of RAM, an SSD and a CPU at the Ryzen 5 3600 / i5-10400 level or better, the graphics card is the component most likely to hold you back.
Can You Play Monster Hunter Wilds on a Laptop or Handheld?
The official requirements are written around desktop parts, but laptops can keep up if you choose carefully. A gaming laptop with an RTX 4060-class mobile GPU sits comfortably above the recommended tier and can handle 1080p, though expect more heat and shorter battery life than a desktop. Handhelds are a tougher proposition: the Steam Deck and similar devices fall below the official minimum GPU tier, so the realistic expectation is the “Lowest” preset with upscaling enabled and a 30 fps target at best — the same upscaled-from-720p baseline the official minimum describes. If portability matters, prioritise a device with a capable GPU and fast SSD storage, since an SSD is required.
How to Boost FPS in Monster Hunter Wilds
If frame rates are low, the first thing to do is enable upscaling — DLSS on NVIDIA, FSR on AMD, XeSS on Intel — because the game’s own minimum and recommended specs are both built around it. Frame Generation is the second lever: the official 60 fps recommended target assumes it’s switched on, so enabling it is the difference between meeting and missing that figure on a recommended-tier card. After that, lower the most expensive visual settings, starting with shadows and other heavy effects, before dropping resolution. Keep your GPU drivers current, close background apps, and make sure the game is installed on an SSD — it’s a requirement here, and DirectStorage support means a fast NVMe drive helps more than a SATA one.
Frequently Asked Questions
Can my PC run Monster Hunter Wilds?
Compare your build against the official numbers. The minimum is a GeForce GTX 1660 with 6 GB (or a Radeon RX 5500 XT with 8 GB), an Intel Core i5-10400 or Core i3-12100 or AMD Ryzen 5 3600, 16 GB of RAM, 75 GB of SSD space and Windows 10 or 11 64-bit — that gets you 1080p upscaled from 720p at 30 fps on the “Lowest” setting. For the recommended experience — 1080p at 60 fps on “Medium” with Frame Generation — you want an RTX 2060 Super or RX 6600.
Is Monster Hunter Wilds demanding on PC?
Yes. The official minimum is written around a 720p native render upscaled to 1080p at 30 fps on the lowest preset, and the recommended 1080p 60 fps figure relies on Frame Generation. It’s a modern, large-scale game that expects upscaling and an SSD rather than an easy ride on older hardware.
What GPU do I need for Monster Hunter Wilds at 1440p 60fps?
The official requirements stop at 1080p, so 1440p means going beyond the published targets. A NVIDIA GeForce RTX 4070 SUPER-class card is a sensible aim, with current-generation options like the RTX 5070 or Radeon RX 9070 in the same bracket, and upscaling enabled to keep frame rates up. Anything above the RTX 2060 Super / RX 6600 recommended tier is a step in the right direction.
How much RAM does Monster Hunter Wilds need?
16 GB. That’s the figure listed for both the minimum and the recommended requirements, so it’s the number to hit — 8 GB falls below spec. Moving to 32 GB won’t change whether the game runs, but it gives you headroom for background tasks and future titles.
Do I need an SSD for Monster Hunter Wilds?
Yes — an SSD is required, not merely recommended, and you’ll need 75 GB of free space. The game also supports DirectStorage, so an NVMe drive like the Samsung 990 Pro is a better choice than a SATA SSD.
