- Top Pick: Logitech G Pro Wireless
- Runner-up: Logitech G502 HERO
- Also consider: Keychron V3
Most co-op deckbuilders reach Linux through a compatibility layer, so a party planning a run usually starts with a ProtonDB check and a small prayer. Across the Obelisk skips that ritual entirely. Dreamsite Games’ roguelite card crawler, published by Paradox Interactive and its Paradox Arc label, ships a native Linux build on Steam, complete with a published Linux system requirements tab. There is nothing to force, nothing to configure and no Windows build standing between you and the kingdom of Senenthia.
That native build matters more here than in a solo game, because Across the Obelisk is built around its multiplayer. A party of up to four players each controls a hero, and the store listing documents crossplay, so your friends do not need to be on the same platform you are. This article reads the record exactly as Steam, Paradox and Valve publish it: the native build and its requirements, how the co-op pool works, what the ProtonDB listing still tells you, and why Valve rates the game Playable on Steam Deck.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
Across the Obelisk has a native Linux build on Steam, published by Paradox Interactive with full Linux system requirements, so no compatibility layer is required. Its online co-op supports parties of up to four with crossplay, and Valve rates the game Playable on Steam Deck, with small interface text as the main deduction.
Status at a glance
| Question | The documented answer |
|---|---|
| Native Linux build | Yes, sold on Steam with a published Linux requirements tab |
| Compatibility layer needed | No; Proton exists only as an optional fallback for the Windows build |
| ProtonDB record | Gold headline tier, best-reported Platinum, trending Silver, 24 reports |
| Steam Deck rating | Playable, per Valve’s published test notes |
| Co-op | Online co-op for a party of up to four heroes |
| Crossplay | Documented on the store page across the platforms the game is sold on |
| Anti-cheat or publisher launcher | None standing between the Linux build and play |
The native build, from Steam’s own record
The platform record is unambiguous. Steam’s data lists Windows, Mac and Linux all as supported platforms, and the Linux entry is not an empty shell: it carries a full minimum requirements block asking for Ubuntu 14.04 LTS, a 2.0 GHz processor, 2 GB of RAM, a graphics card with 1 GB of video memory and OpenGL 3.0 support, and 1 GB of storage. Those are modest demands, describing a lightweight 2D card game rather than a 3D production.
Paradox’s own FAQ corroborates the store data, listing Linux among the platforms the game is available on. The native build is no leftover flag from an abandoned experiment; it is part of the publisher’s current platform list, and Steam installs it the same way it installs any native title.
Two consequences follow. First, there is no compatibility layer in the loop: no Proton version to pick, no launch option to set, no per-update risk that a patch breaks a translation layer the developer never targeted. Second, the listed Steam features work as expected: the category record includes Steam Cloud and Steam Achievements, so unlocks and hero progress follow your account rather than living inside a Wine prefix.
Co-op and crossplay, as documented
Across the Obelisk is a four-hero party game at heart. One player can control the whole party alone, or up to four players can each take a hero in online co-op, deciding routes, card rewards and combat plays together. Steam’s category record lists single-player, multi-player, co-op and online co-op, which matches the store description’s emphasis on cooperation being vital.
The store page also documents crossplay in plain language: you can team up with other players on whichever platform they own. For a Linux player that is the important sentence in the whole listing. Your native build is not fenced into a Linux-only pool; the same Senenthia runs host Windows, Mac and console players, so a mixed group does not need to coordinate purchases around your operating system. The store description adds a generous touch for groups: story DLC owned by one player is shared across platforms with the entire party during a run, which lowers the coordination cost of playing the expanded content together.
Because the multiplayer is a co-operative session between friends rather than a competitive ladder, there is no kernel anti-cheat in the picture and no publisher account layer gating the Linux build. The weekly challenge mode, which puts every player on a predetermined deck and map, is a leaderboard score chase rather than a matchmaking system, and it works from the same build.
The Proton footnote
ProtonDB still carries a listing for this game, and it is worth reading correctly rather than ignoring. The summary record shows a Gold headline tier, a best-reported tier of Platinum and a trending tier of Silver, drawn from 24 reports with moderate confidence. That spread looks odd until you remember what those reports measure: they describe the Windows build running through Proton, filed by players who forced the compatibility layer or reviewed it before settling on the native version.
For a Linux desktop player, that record is a diagnostic footnote, not the way in. If the native build ever misbehaves on an unusual setup, forcing Proton is a documented fallback with a Gold-rated history behind it. But the default, supported and publisher-listed route is the native build, and the ProtonDB numbers should never be quoted as the game’s Linux status.
Steam Deck: Playable, and why
Valve’s published test notes rate Across the Obelisk Playable on Steam Deck, and the deductions are the familiar interface trio for a mouse-first card game. Valve records that the default controller configuration is fully functional and that the default graphics configuration performs well, which covers the two things that actually decide whether a run feels good on the handheld. Against that, the game sometimes shows non-Deck controller icons, entering text does not automatically bring up the on-screen keyboard, and some in-game text is not legible at the Deck’s screen size.
None of those deductions is a performance or compatibility problem. Card text is the game’s primary information channel, and the game packs long effect descriptions onto its cards, so small text is a genuine comfort issue on a handheld screen rather than a box-ticking complaint. A Deck owner who mainly plays docked will get on fine; a player who wants a Verified-badge experience with no squinting should know the badge is Playable before buying. The SteamOS side of Valve’s report lands in the same Playable band, with game startup functional.
Gear for long co-op deckbuilding sessions
A four-player run through all four acts is a long, mouse-driven session, and the native build’s tiny footprint means almost any setup will do. These picks suit the way the game is actually played on Linux.
Logitech G Pro Wireless
A light wireless mouse suits a game where every decision is a click on a card, a map node or a reward. The G Pro Wireless keeps the shell ambidextrous and the weight low for hours of small movements.
- Specs: LIGHTSPEED 2.4 GHz wireless with USB receiver
- Specs: HERO 25K optical sensor
- Specs: Ambidextrous shell with removable side buttons
- Specs: Rechargeable battery, up to 80 hours with lighting off per maker figures
- Specs: Onboard memory for stored profiles
Logitech G502 HERO
Players who prefer a heavier, sculpted mouse with more buttons get the wired classic. Its extra inputs map well to a game full of menus and hero screens.
- Specs: HERO 25K optical sensor
- Specs: 11 programmable buttons
- Specs: Adjustable weight system with five removable weights
- Specs: LIGHTSYNC RGB lighting
- Specs: Wired USB connection, no battery to manage
Keychron V3
Deckbuilders are keyboard-light, but naming runs, chatting with a co-op party and searching menus all go faster on a proper board. The V3 is a tenkeyless wired board with hot-swappable switches and QMK and VIA remapping, which behaves predictably on Linux.
- Specs: 87-key tenkeyless layout
- Specs: Hot-swappable PCB, K Pro Brown switches on this variant
- Specs: QMK and VIA key remapping support
- Specs: Volume knob on the knob variant
- Specs: USB-C wired connection
Samsung T9 Portable SSD 2TB
The game itself needs only 1 GB, so this drive is about the whole library: a fast external SSD keeps a growing collection of native and Proton games in one place between desktop and docked Deck play.
- Specs: 2 TB capacity
- Specs: USB 3.2 Gen 2×2 interface over USB-C
- Specs: Maker-rated sequential reads up to 2,000 MB per second on a Gen 2×2 host; lesser ports run at their own ceiling
- Specs: Drop-resistant metal enclosure per maker figures
- Specs: Bus-powered, no separate adapter
Valve Steam Deck OLED 512GB
Valve rates the game Playable on the Deck, and the OLED model is the comfortable way to take a co-op run to the couch: the larger, brighter screen helps with the card text that earned the Playable deduction in the first place.
- Specs: 7.4-inch HDR OLED display, 1280 by 800
- Specs: 512 GB NVMe internal storage
- Specs: AMD APU with a 50 watt-hour battery
- Specs: Wi-Fi 6E and Bluetooth
- Specs: Sold primarily through Valve’s own store; the Amazon listing is a third-party seller listing
How to choose
Start with the Steam copy, because that is where the native build lives; there is no separate Linux edition to hunt down and no compatibility setting to enable. If your group plays across platforms, the documented crossplay means everyone buys on their own platform and the party forms anyway. Choose controls by session length: a light wireless mouse for long desktop runs, or the Deck for couch play with the understanding that card text runs small. Storage is a non-issue for this title, so buy capacity for the rest of your library.
Who should skip
Skip the Deck version as your main way to play if small text genuinely strains you, because Valve’s Playable notes name illegible interface text and the game communicates through its cards. Skip the game if you want a solo, story-led RPG rather than a systems-driven roguelite built around repeat runs and party decisions. And if your group insists on competitive ranked play, this is a co-operative game with a weekly score challenge, not a ladder.
FAQ
Does Across the Obelisk need Proton on Linux?
No. Steam sells a native Linux build with published Linux system requirements, and Steam installs that build by default. Proton exists only as an optional fallback for the Windows build, where ProtonDB shows a Gold headline tier from a small pool of reports.
Can Linux players join friends on Windows or consoles?
Yes. The store page documents crossplay, stating that you can team up with players on whichever platform they own. Online co-op supports a party of up to four heroes, and story DLC owned by one player is shared with the whole party during a run.
Why is the game only Playable on Steam Deck?
Valve’s test notes pass the game on controller functionality and performance, and deduct for interface issues: non-Deck controller icons, text entry that does not automatically open the on-screen keyboard, and some in-game text that is not legible at that screen size.
Will my progress carry between machines?
Steam’s listing for the game includes Steam Cloud, so saves and unlocks sync through your Steam account between a Linux desktop and a Steam Deck running the same build.
Final verdict
Across the Obelisk is an easy recommendation in the Linux deckbuilder catalogue: a native build with published requirements, documented crossplay that keeps a Linux player inside the main co-op pool, and no launcher or anti-cheat layer to negotiate. The only honest caveat is handheld comfort, where Valve’s Playable badge and its small-text deduction should set expectations. Buy it on Steam, install the native build, and bring three friends.











