Fast forward, rewind, slow motion and frame advance are the four speed controls that separate playing on an emulator from playing on original hardware, and the features players reach for most in long RPGs and brutal retro platformers. They are also widely misunderstood: fast forward is not a multiplier the emulator grants you, and rewind is not a video recording you can scrub.
As an Amazon Associate, we earn from qualifying purchases.
This guide explains the mechanics underneath each tool — what removing the frame limiter actually does, why rewind is a ring buffer of save states whose cost explodes as consoles get newer, and where each major emulator draws the line. Everything here assumes games dumped from media you own.
This article contains affiliate links, and we may earn a commission when you buy through them at no extra cost to you.
Quick Answer
Fast forward removes the frame limiter so the emulator runs as fast as your CPU allows; rewind continuously stores save states in a RAM ring buffer so you can step backwards. Both need CPU headroom: 8 and 16-bit systems rewind for minutes, while PS2-class cores often cannot rewind at all. RetroAchievements hardcore allows fast forward only.
Fast Forward: What Removing the Limiter Really Does
A running emulator is normally throttled. The core could often produce frames far faster than the console’s original refresh rate, so the frontend holds it back, releasing frames in step with your display and audio. Fast forward simply removes or raises that limiter — the same code just runs flat out.
That is why your CPU sets the ceiling. Most cores do their heavy lifting on one main thread, so per-core clock speed decides how far past full speed you can push. A lightweight NES core fast-forwards almost without limit, while a demanding PS2 game that barely holds full speed has nothing left to give. DuckStation states this plainly: its fast forward speed setting, a percentage target or unlimited, is only a target — the emulator runs as fast as your hardware manages.
Audio is the awkward part, because sound is normally the metronome. Emulators cope three ways: pitch the audio up with the game, turning music into a chipmunk rendition; mute it while fast forwarding — Mednafen makes this explicit with a setting that silences sound during fast forward; or drop audio synchronisation and accept crackle and drift. Finally, decide how the control behaves. A hold binding runs fast forward only while the key is down — right for skipping a doorway. A toggle binding latches it on, suiting long grinding sessions. DuckStation binds held and toggle fast forward as separate hotkeys, so you can have both.
Rewind: A Ring Buffer of Save States
Rewind feels like time travel, but mechanically it is bookkeeping. Several times a second, the emulator serialises its entire state — CPU registers, RAM, video memory, sound state — exactly as it does for a save state, and keeps the results in a ring buffer in system RAM. Hold the rewind key and it loads those snapshots back, newest to oldest, so play runs backwards.
Two settings govern it in RetroArch, under Settings, Frame Throttle, Rewind. Rewind Frames is the granularity: capture a state every frame for the smoothest rewind, or every few frames to spend less memory at the cost of coarser steps. Rewind Buffer Size is how much RAM the ring may occupy. RetroArch’s state manager softens the cost by storing deltas — only the words that changed since the previous state. An NES or SNES state is tiny, so a modest buffer holds minutes of rewindable time. A PlayStation state is far larger, and DuckStation, which implements its own rewind with a save frequency and buffer size, shows the estimated duration plus RAM and VRAM cost in its settings screen, because a hardware renderer must stash GPU state too.
Scale that up and rewind collapses. PS2 and GameCube-class states run to tens of megabytes each before graphics state, and several heavy cores cannot serialise completely enough to support the feature at all. Mednafen takes the fixed-budget route: its save-state rewinding keeps up to 600 frames. Either way, rewind needs the core to support save states in the first place; no serialisation, no rewind.
Slow Motion and Frame Advance: The Other Two Gears
Slow motion is fast forward’s mirror: the limiter is set below the console’s native rate, stretching each second of game time over more real time. It buys reaction room in bullet-dense shooters and precision platforming, and timing and audio pitch simply scale down with it.
Frame advance is the scalpel. Pause, then step exactly one frame at a time — RetroArch binds it as a hotkey, mGBA advances with Ctrl+N, and Mednafen enters a dedicated frame advance mode. It is the core tool of tool-assisted play, where routes are built frame by frame, but it earns its keep in ordinary play too: inching through a puzzle solution one move at a time.
How the Big Emulators Handle Speed
RetroArch is the unified model: all four tools live in the frontend, behave identically everywhere, and work with any core that supports save states — which is also why heavy cores lose rewind while light ones keep it. DuckStation builds its own fast forward and rewind with the settings described above, and disables rewind while its runahead latency feature is active. PCSX2 offers turbo and slow-motion as percentage-based speed modes in its emulation settings, toggled by hotkey, but has no rewind — its save states are manual slots you create and load yourself.
The handheld-focused emulators split the difference. mGBA ships both tools: rewind sits on the Backquote key by default and fast forward is fully configurable alongside it. Standalone melonDS gives you fast forward but no built-in rewind, so DS rewind means routing through a frontend whose core supports it, with the state-size costs that follow. Some emulators simply leave features out: Dolphin can unthrottle its speed but offers no rewind, and Xenia offers neither in any polished form.
Speed Controls, Save Files and Achievements
RetroAchievements draws the hardest line. Its hardcore mode rules disable rewind, slowdown and frame advance, block loading save states entirely, and turn cheats off — and its global rules name fast forward as the one accepted exception, allowed even in hardcore as a modern convenience. Creating save states in hardcore is permitted, but they cannot be loaded until you leave the mode.
Saves need equal care. Fast forwarding through a game does not harm its battery or memory-card save — the game’s own save routines still run normally, just sooner. The trap is the save state itself: a state captures the machine’s save RAM too, so loading an old state can roll your in-game save back to the moment that state was made, discarding progress recorded since. Treat states as the scratchpad and the game’s own save as the record; after loading an old state to retry a section, save in-game deliberately once you are back on track.
Hardware That Gives Speed Controls Room to Work
Speed controls are bought with headroom: a machine that only just reaches full speed has nothing spare for fast forward and no budget for a rewind buffer.
AMD Ryzen 5 7600X
The single upgrade that raises every fast-forward ceiling, because most cores lean on one fast thread.
- Specs: 6 cores, 12 threads
- Specs: Boost clock up to 5.3 GHz
- Specs: AM5 socket, DDR5 memory support
- Specs: Cooler not included
MINISFORUM UM790 Pro Mini PC
A compact box with desktop-class per-core speed and generous RAM for RetroArch rewind buffers.
- Specs: Ryzen 9 7940HS, 8 cores and 16 threads, up to 5.2 GHz
- Specs: Radeon 780M integrated graphics
- Specs: 32 GB DDR5 memory
- Specs: 1 TB PCIe 4.0 SSD, two M.2 slots
8BitDo Pro 2 Bluetooth Controller
Hold-to-fast-forward only works if the button sits under a free finger. This pad’s two back buttons take the speed hotkeys.
- Specs: Hall Effect joysticks
- Specs: Two remappable back buttons
- Specs: Profiles via 8BitDo Ultimate Software
- Specs: Bluetooth and USB-C wired modes
Xbox Elite Wireless Controller Series 2 Core
This controller’s remapping puts fast forward and rewind where you want them, with adjustable-tension sticks for the frame-advance moments in between.
- Specs: Button remapping via the Xbox Accessories app
- Specs: Adjustable-tension thumbsticks
- Specs: Rechargeable battery, USB-C charging
- Specs: Paddle kit sold separately — not stated as included
Samsung 990 PRO 2TB NVMe SSD
Rewind lives in RAM, but your disc images, state libraries and emulator installs live on storage — a fast, roomy NVMe drive keeps big libraries loading instantly.
- Specs: 2 TB capacity
- Specs: PCIe 4.0 NVMe interface
- Specs: M.2 2280 form factor
- Specs: Model MZ-V9P2T0B/AM
How to Choose
Start with the systems you play. If your library is 8 and 16-bit, rewind and fast forward cost almost nothing and any recent PC runs both. If you live on PlayStation, budget RAM for DuckStation’s rewind buffer and check its settings estimate before a long session. If your target is PS2 or GameCube, plan around fast forward and manual save states, because rewind is mostly off the table. Then bind deliberately: hold-style fast forward on a back button for short skips, a toggle for grinding, and rewind somewhere you cannot hit by accident. Finally, decide your achievement stance first — hardcore players build habits around fast forward alone.
Who Should Skip
Skip the deep setup if you only play one light system casually; the defaults will carry you. Skip rewind entirely on low-RAM machines, where the buffer competes with the emulator itself. Skip fast-forward-driven play if you are chasing RetroAchievements hardcore masteries beyond what the rules allow, and skip frame advance unless you genuinely enjoy routing — it is a specialist tool.
FAQ
Why does fast forward barely speed up my game?
Because the limiter was never the bottleneck. Fast forward only removes the cap; if your CPU already spends everything it has reaching full speed, no headroom is left. Heavier cores and higher internal resolutions eat the margin fast forward needs.
Why is there no rewind on PS2 or GameCube emulators?
State size and serialisation. Rewind needs a complete machine snapshot several times a second; newer consoles have far more memory and graphics state to capture, and several heavy cores cannot snapshot completely enough to support it.
Does fast forward damage my save file?
No. The game’s own save routines run as normal, only sooner. The real risk is loading an old save state, which can restore the save RAM captured inside that state and roll back later progress. Keep an in-game save as your permanent record.
Can I use rewind and still earn hardcore achievements?
No. RetroAchievements hardcore mode disables rewind, slow motion and frame advance and blocks loading save states. Fast forward is the single exception its rules allow.
Final Verdict
Treat the four speed controls as one toolkit with one budget. Fast forward spends CPU headroom, rewind spends RAM and state size, slow motion and frame advance spend nothing but patience — and the emulator you choose decides which of them exist at all. Set the buffer and bindings once, respect the save-state trap, and these tools quietly remove the worst friction retro games ever shipped with.










