- Top Pick: AMD Ryzen 7 7800X3D
- Runner-up: LG UltraGear 34GP83A-B
- Also consider: WD_BLACK SN850X 2TB
Few series split down the middle as cleanly as this one. The first Cities: Skylines, released by Colossal Order in 2015, shipped with a native Linux build on day one and still carries full SteamOS and Linux system requirements on its store page. Its sequel, Cities: Skylines II, arrived in 2023 as a Windows-only release, so Linux players reach it through Proton instead. Same publisher, same genre, two completely different setup stories.
That split decides almost everything else in this guide. The original gives you a native binary, the full Steam Workshop modding scene and a Steam Deck Playable rating. The sequel gives you a heavier simulation that runs through a translation layer, carries a Gold rating on ProtonDB, and is marked Unsupported on the Steam Deck. Knowing which game you actually want to play is the whole decision.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
Cities: Skylines (2015) runs natively on Linux with full Steam Workshop support and a Playable rating on Steam Deck, making it the safe, complete city builder for Linux. Cities: Skylines II is Windows-only but holds a Gold rating on ProtonDB through Proton; it is demanding in big cities on every platform and Unsupported on Deck.
The two games at a glance
| Cities: Skylines | Cities: Skylines II | |
|---|---|---|
| Linux route | Native build | Proton |
| Compatibility record | Listed as Native on ProtonDB | Gold on ProtonDB |
| Steam Deck rating | Playable | Unsupported |
| Modding route | Steam Workshop | Paradox Mods, in game |
| Front door | Paradox Launcher v2 | Paradox Launcher, under Proton |
Cities: Skylines (2015): the native build
The original is one of the easiest recommendations in the genre. Steam’s own requirements list an Ubuntu 12.04 64-bit system as the Linux minimum, which tells you how long the native build has been a first-class citizen. There is no compatibility layer to configure, no Proton version to pick and no launch tinkering required: install it, and the Linux binary is what runs.
A decade of expansions sits behind it, covering mass transit, industry, campuses, airports and natural disasters, and the game is effectively complete. Recent player reports on ProtonDB describe the vanilla native build working well out of the box, which matches its long-standing reputation. The honest caveats are about appetite rather than compatibility. The game grows hungry for memory as you stack expansions and Workshop assets, and a minority of heavily modded setups are reported to behave better when the Windows build is forced through Proton. Treat native as the default, and Proton as a fallback for a specific mod list that misbehaves.
On Steam Deck, Valve rates the original Playable. It is a mouse-driven game, so expect trackpad work rather than a tailored controller layout, but the native build keeps performance comfortable for the kind of modest cities a handheld session suits.
The Paradox launcher on Linux
Both games open through the Paradox Launcher v2 on Steam, and the launcher is not a Windows-only gatekeeper here. Paradox’s own helpdesk documents the launcher’s Linux installation paths alongside its Windows and Mac ones, which makes it a supported native component for the first game rather than something Linux players route around.
That said, the launcher has a documented rough edge. Player reports describe the older launcher breaking after one of its self-updates, leaving the game unable to start until the launcher’s local files are cleared and it reinstalls itself, which is the same cure Paradox’s helpdesk walks through. If the launcher ever becomes the problem, Steam’s launch options can be pointed at the game executable instead of the launcher’s bootstrapper, starting the city builder directly. For the sequel, the launcher runs inside the Proton prefix, and bypassing it the same way is the single most common tweak in its ProtonDB reports.
Workshop mods on the native build
Modding is where the original pulls furthest ahead. Steam Workshop subscriptions work on the native Linux build exactly as they do on Windows: subscribe to an asset or a code mod and Steam delivers it into the same content manager. The catalogue is enormous after a decade, from road tools and traffic managers to entire building collections.
Most code mods travel well because they run inside the game’s own managed runtime rather than as Windows binaries, so the mod scene is effectively shared across platforms. The exceptions are individual mods with platform quirks, which is why some players keep a Proton fallback for one stubborn list. The practical limit is your hardware, not the operating system: thousands of custom assets inflate memory use and loading times on any platform, and Linux is no different.
Cities: Skylines II through Proton
The sequel is a Windows-only Unity title, and Proton carries it well at the compatibility level. ProtonDB rates it Gold across several hundred reports, with Proton Experimental the most common suggestion in recent ones. It installs, launches, saves and mods; the translation layer is not the story here.
The story is weight. The publisher’s own recommended specification was unusually demanding for the genre at launch, and a large city’s simulation load strains strong hardware on Windows too, so Linux players inherit the same late-game ceiling rather than a Proton penalty. Frame performance expectations around city size: a young city on modest settings is a smooth experience, while a sprawling metropolis will slow down everywhere. Development has since passed from Colossal Order to Iceflake Studios, and recent updates have concentrated on performance and the underlying simulation, so checking fresh reports before a long campaign is worthwhile.
Two structural differences matter. There is no Steam Workshop for the sequel; mods are handled through the Paradox Mods platform built into the game, which works through Proton. And the Steam Deck is off the table: Valve rates Cities: Skylines II Unsupported on the Deck, and handheld reports describe even an empty map struggling at the lowest settings. This is a desktop game.
Gear for long city-building sessions
City builders reward memory, fast storage and screen width more than raw graphics power. These five picks cover the simulation desk and the handheld route for the original.
AMD Ryzen 7 7800X3D
The simulation processor to beat for this genre. Late-game Cities: Skylines II and a heavily modded original are both limited by single-core simulation speed and cache behaviour, which is exactly where this chip’s stacked cache earns its keep.
Specs:
– 8 cores, 16 threads, AM5 socket
– Boost clock up to 5.0 GHz
– 96 MB L3 cache with 3D V-Cache
– Integrated Radeon graphics, 120 W TDP
LG UltraGear 34GP83A-B
An ultrawide makes zoning and transport planning visibly easier, because the whole district fits on screen without constant panning. The 3440 by 1440 Nano IPS panel is the draw here; the high refresh rate is a bonus the genre does not need but never hurts.
Specs:
– 34-inch curved Nano IPS panel, 3440 x 1440
– 144 Hz native, 160 Hz overclocked over DisplayPort
– 1 ms grey-to-grey response, DisplayHDR 400
– AMD FreeSync Premium and NVIDIA G-SYNC Compatible
WD_BLACK SN850X 2TB
Both games stream assets constantly, and a modded original with a big Workshop library loads far faster from a quick NVMe drive. The 2TB size leaves room for the sequel’s roughly 50 GB install, the original’s asset hoard and everything else in your library.
Specs:
– PCIe Gen4 x4 NVMe, M.2 2280
– Sequential reads up to 7,300 MB/s
– 2 TB capacity
– Optional heatsink variant for tight cases
Samsung T9 Portable SSD 2TB
A pocket drive for moving a Steam library or a folder of saved cities between a desktop and a laptop. It will not beat an internal NVMe drive, but over a fast USB port it keeps game transfers and backups painless.
Specs:
– USB 3.2 Gen 2×2, up to 2,000 MB/s reads and writes
– 2 TB capacity in a pocket-sized shell
– Drop resistance rated to 3 metres
– AES 256-bit hardware encryption
Valve Steam Deck OLED 512GB
The handheld route for the original game only. The native build plus Valve’s Playable rating makes the first Cities: Skylines a reasonable trackpad-and-coffee city builder, while the sequel’s Unsupported rating rules it out here.
Specs:
– 7.4-inch HDR OLED, 1280 x 800, up to 90 Hz
– 512 GB NVMe storage, microSD expansion
– Wi-Fi 6E and Bluetooth 5.3
– 50 Wh battery
How to choose
Start with the game, not the hardware. If you want the deepest mod scene, the complete expansion catalogue and a build that simply installs and runs, the original on its native build is the answer, and it is the only one of the two that belongs on a Steam Deck. If you want the newer simulation, the redesigned road tools and the larger maps, the sequel through Proton is genuinely playable on a desktop with a strong processor, provided you accept that a big city will slow down just as it does for Windows players.
Then match your machine to the ceiling. For the original, memory headroom matters most once Workshop assets pile up. For the sequel, processor speed decides how large your city gets before the simulation labours, and an SSD is effectively mandatory. In both cases, read the most recent ProtonDB reports for your exact setup before committing to a long campaign in the sequel.
Who should skip
Skip the sequel if your only machine is a Steam Deck or a low-power laptop; its Unsupported rating and heavy simulation are a poor match for handheld hardware. Skip the sequel’s mod scene expectations if you live in the Steam Workshop, because its mods live on a different platform with a smaller catalogue. Skip the original if you have already exhausted a decade of its content and only the new simulation will do. And skip both purchases until you have checked the launcher situation if publisher launchers are a hard personal line, though on Linux the first game’s launcher is a native, documented component rather than a workaround.
FAQ
Is Cities: Skylines native on Linux or does it need Proton?
It is native. The 2015 original shipped with a Linux build and still lists SteamOS and Linux requirements on its Steam page, and ProtonDB classifies it as Native. Proton only enters the picture if a particular mod setup misbehaves and you choose to force the Windows build as a workaround.
What is the ProtonDB rating for Cities: Skylines II?
Gold, based on several hundred player reports. Most recent reports recommend Proton Experimental, and the common themes are performance in large cities and the occasional launcher hiccup rather than outright failures to run.
Can I play either game on Steam Deck?
The original, yes: Valve rates it Playable, and the native build keeps it comfortable for smaller cities with trackpad controls. The sequel, no: Valve rates Cities: Skylines II Unsupported on Steam Deck, and its simulation is too heavy for the handheld.
Do mods work the same on Linux?
For the original, yes: Steam Workshop subscriptions install and load on the native build just as on Windows, and most code mods are platform-neutral. The sequel does not use the Workshop at all; its mods come from the Paradox Mods platform inside the game, which also works through Proton.
Final verdict
Linux players get the better end of this series’ history. The original Cities: Skylines remains the complete package: native, deeply modded, Deck-friendly and finished. Cities: Skylines II is a legitimate desktop option through Proton at a Gold standard, with the same late-game performance ceiling Windows players live with and a new developer actively working on it. Own the original first; add the sequel when your processor and your patience for a heavier simulation are both ready.











