- Top Pick: Xbox Wireless Controller (2025), Carbon Black
- Runner-up: Xbox Elite Wireless Controller Series 2, Black
- Also consider: Xbox Adaptive Controller
Microsoft sells three very different Xbox controllers — the standard Series X|S pad, the Elite Series 2 and the Adaptive Controller — and on Windows the choice between them is mostly about features and budget. On Linux the question changes: what matters is how each model behaves across the open driver paths, and which of its features live on the device itself rather than in a configuration app that does not exist for Linux.
This article compares the three models on those terms: driver state per connection type, what carries over to Linux, what does not, and the firmware caveat. If you already own one of these pads and need pairing steps and troubleshooting, our separate connection guide covers the three routes in detail; this page is the buying decision, not the setup walkthrough.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
All three controllers work on Linux, but they are not equal once you leave Windows. The standard pad is the safest buy, fully supported over USB and Bluetooth. The Elite Series 2 keeps its hardware features but loses its configuration app. The Adaptive Controller works as a standard gamepad, its external switches handled by the device itself.
One family, three driver paths
Every current Xbox controller reaches Linux through one of three drivers, and the driver decides the experience more than the model does.
- USB cable — xpad. The in-kernel xpad driver handles all three models wired, plus older Xbox 360 and Xbox One pads. Plug and play on any modern distro, with correct buttons, triggers and rumble.
- Bluetooth — xpadneo. The out-of-tree xpadneo driver is the documented route for the standard pad and the Elite over Bluetooth: it fixes the mapping quirks of a generic pairing, adds battery reporting and handles rumble correctly. The Adaptive Controller also pairs over Bluetooth as a standard gamepad.
- The official dongle — xone. Microsoft’s Xbox Wireless Adapter does not speak Bluetooth; it uses the native Xbox Wireless protocol. On Linux it is driven by xone, an out-of-tree kernel driver built on the earlier xow project’s work, supporting up to eight controllers per adapter, including headset audio through a controller.
The standard controller: the nothing-to-configure option
The current standard pad (model 1914, sold in the 2025 packaging as model EP2-29929 in Carbon Black) is the benchmark the other two are judged against. Over USB it is handled by xpad; over Bluetooth Low Energy, xpadneo gives it correct mapping and a working battery indicator. Steam Input recognises it instantly, so per-game remapping on Linux happens through Steam rather than any Microsoft tool. Its hybrid D-pad, triggers and rumble are standard inputs every driver path exposes. Power is the only practical difference from the Elite — two AA batteries, maker-rated for up to 40 hours, with a rechargeable pack sold separately. If you do not need paddles, swappable parts or switch inputs, its Linux support is complete on day one, over every route.
The Elite Series 2: hardware travels, the app does not
The Elite Series 2 is built around customisation, and most of it is physical: adjustable-tension thumbsticks set with the included tool, mechanical hair trigger locks with three positions, a rubberised grip, and swappable thumbsticks and D-pad. None of that cares which operating system is on the other end of the cable, and over USB or Bluetooth the Elite is served by the same xpad and xpadneo drivers as the standard pad, with an internal rechargeable battery maker-rated for up to 40 hours.
The four rear paddles are where the boundary sits. Paddle assignments, stick curves and button remapping live in profiles; up to three are stored on the controller itself and cycled with its profile button. Stored profiles work on Linux exactly as configured — but they are created and edited only in the Xbox Accessories app on an Xbox console or a Windows PC, so build them there once and switch them on the device under Linux. Steam Input remaps the face controls per game, but it does not replace the profile editor for the paddles.
The Adaptive Controller: the hub is the device
The Xbox Adaptive Controller is not a smaller or larger gamepad; it is a hub. The slab carries two large programmable buttons and a D-pad, and around the back sit nineteen 3.5mm ports — one for each standard controller input — plus two USB ports for external joysticks. Every port is labelled, and threaded mounting points fit AMPS-pattern and tripod mounts.
On Linux, the key fact is that the operating system only ever sees one standard gamepad. A switch, button or joystick plugged into the Adaptive Controller is an input of the controller itself, handled inside the device, so the whole assembly is served by the same xpad driver over USB and pairs over Bluetooth like the other models — no special driver or configuration tool is needed for external devices to register. As with the Elite, three profiles are stored on the device, but editing happens in the Xbox Accessories app on Xbox or Windows. One documented feature does not carry over: Copilot, which links two controllers to act as one, is a platform feature of Xbox and Windows.
The firmware caveat that applies to all three
Controller firmware is the one maintenance task Linux cannot do. Microsoft ships firmware updates for all three models exclusively through the Xbox Accessories app on Windows or an Xbox console. There is no Linux updater.
This is not a theoretical gap. Outdated firmware on the Series X|S pad is a documented cause of Bluetooth pairing failures and repeated disconnections, and the documented remedy is to update on a Windows machine or console and then return to Linux. So update a new controller’s firmware before first use if a console or Windows PC is within reach, and treat sudden Bluetooth misbehaviour later as a firmware question first. Wired play is unaffected either way.
Bluetooth versus the dongle, honestly
Bluetooth through xpadneo costs nothing extra, but its quality depends on the host’s Bluetooth adapter. The official dongle through xone uses the native Xbox Wireless protocol instead: up to eight controllers on one adapter, headset audio through the controller’s jack, and no dependence on the host’s Bluetooth stack. The costs are an out-of-tree driver to maintain, and the adapter itself — Microsoft no longer sells it as a current product, so listings are remaining stock and the second-hand market, alongside many inconsistent clone adapters. For one pad at a desk, Bluetooth or a cable is enough; for a living-room PC running several pads, the dongle is the better tool when you can find a genuine one.
How to choose
- Choose the standard controller if you want the complete Linux experience with zero caveats: every route works, and AA batteries are the only upkeep.
- Choose the Elite Series 2 if you will use the paddles, trigger locks and stick tension, and have occasional access to a Windows PC or Xbox for profiles and firmware.
- Choose the Adaptive Controller if your setup is built from external switches, buttons or joysticks: the hub presents them all to Linux as one gamepad.
- Add the official dongle if several players share one Linux PC, or if your machine’s Bluetooth is unreliable.
- Add a charging dock if you run multiple pads and want rechargeable packs instead of AA swaps.
Who should skip this
Skip all three if you need gyro aiming or touchpads for mouse-driven games; no Xbox controller has either. Skip the Elite if its appeal is mainly app-driven profile editing and you have no Windows or console access at all — you would be paying for configuration you cannot perform. Skip the dongle route if you dislike out-of-tree kernel drivers. And skip the Adaptive Controller if you simply want a conventional pad; it is a hub for external devices, not a premium gamepad.
The controllers and the kit
Xbox Wireless Controller (2025), Carbon Black
The default recommendation: the model every Linux driver path is built around.
Specs:
– Model: EP2-29929 (hardware model 1914), Carbon Black
– Connectivity: Xbox Wireless, Bluetooth Low Energy, USB-C
– Power: 2 AA batteries, maker-rated up to 40 hours
Xbox Elite Wireless Controller Series 2, Black
The premium option, bought for its hardware.
Specs:
– Model: FST-00001, Black
– Connectivity: Xbox Wireless, Bluetooth, USB-C
– Customisation: 4 removable paddles, adjustable-tension thumbsticks, 3-position hair trigger locks, 3 stored profiles
– Linux caveat: profiles and firmware are managed only through the Xbox Accessories app on Xbox or Windows
Xbox Adaptive Controller
The hub option for external switches and joysticks.
Specs:
– Model: JMU-00003
– Ports: 19 3.5mm inputs, 2 USB 2.0 ports for joysticks, 3.5mm headset jack
– Connectivity: Xbox Wireless, Bluetooth, USB-C
– Power: internal rechargeable battery, USB-C charging, optional external power adapter for powered accessories
– Mounting: threaded points for AMPS-pattern and tripod mounts
Microsoft Xbox Wireless Adapter for Windows
The genuine dongle for the native Xbox Wireless protocol, running on Linux through xone; Microsoft no longer lists it as a current product, so check listings against clones.
Specs:
– Model: 1790
– Connection: USB dongle, Xbox Wireless protocol
– Linux driver: xone (out-of-tree); the older xow project is its predecessor
PowerA Duo Charging Station for Xbox Series X|S, Black
A dock that charges two controllers at once on included rechargeable packs, replacing AA swaps.
Specs:
– Brand: PowerA, officially licensed for Xbox
– Capacity: 2 controllers, drop-in charging stands
– Includes: 2 rechargeable battery packs and charge-through battery doors for Xbox Series X|S and Xbox One controllers
FAQ
Do the Elite Series 2 paddles work on Linux?
Yes, within the limits of the on-device profiles. The paddles output whatever the active stored profile assigns to them, and you switch profiles with the controller’s profile button. Creating or editing profiles requires the Xbox Accessories app on Xbox or Windows.
Can I update Xbox controller firmware on Linux?
No. Microsoft delivers controller firmware only through the Xbox Accessories app on Windows or through an Xbox console, for all three models alike. Since outdated firmware is a documented cause of Bluetooth pairing problems on the Series pads, updating on a borrowed Windows machine or console is the documented fix.
Does the Adaptive Controller need special Linux drivers for its switches and joysticks?
No. External switches, buttons and joysticks plug into the Adaptive Controller, which presents the whole assembly as one standard gamepad, served by the same xpad driver over USB as any other Xbox pad.
Is the official dongle worth it over Bluetooth on Linux?
For one controller, usually not: Bluetooth through xpadneo or a USB cable covers it. The dongle earns its place on a shared Linux PC, where xone runs up to eight controllers through one adapter with headset audio, independent of the host’s Bluetooth hardware.
Final verdict
On Linux, the standard Xbox Wireless Controller is the complete package: every driver path works, and nothing depends on software Linux lacks. The Elite Series 2 is a genuine upgrade for players who set up its profiles once on Windows or a console and then live on its hardware. The Adaptive Controller’s entire value is in the device itself, so a switch-and-joystick setup built around it works on Linux exactly as designed. Pick by which description matches your desk, and keep a Windows or console route in mind for firmware day.










