A gigabit internet plan is only as fast as the router that carries it into your home. An older router with 100 Mbps ports, a single crowded band, or Wi-Fi 5 radios can cap a 1 gig connection long before your provider does. The best routers for 1 gig internet share three basics: a gigabit or faster WAN port, gigabit LAN ports for wired devices, and Wi-Fi 6, 6E, or newer radios with enough combined throughput that one busy device does not starve the rest of the household.
As an Amazon Associate we earn from qualifying purchases
Below are four currently listed options: an apartment router, a stronger all-rounder for a house, a gaming-focused model with a multi-gig port, and a Wi-Fi 6E mesh system for larger floor plans. A short setup guide follows the picks.
What a Router Needs to Deliver 1 Gig Internet
Ports come first
Check the WAN port before anything else. It must be rated for gigabit Ethernet or faster; a 100 Mbps WAN port limits the whole network regardless of the wireless specification. The same applies to LAN ports used for a PC, console, or switch. A 2.5 Gbps port, where fitted, is useful headroom for multi-gig plans and for a fast wired link to a gaming PC or network storage, but it is not required for a standard 1 gig service.
Wi-Fi standard and real throughput
Wi-Fi 6 improves efficiency on busy networks through OFDMA and MU-MIMO, so several devices can share airtime with less waiting. Wi-Fi 6E adds the 6 GHz band, which is wider and usually less congested, for compatible phones, laptops, and adapters. Rated figures such as AX5400 are combined theoretical totals across all bands, not the speed one device will see. A single modern client on a clear 5 GHz or 6 GHz channel, in the same room, is the realistic way to approach gigabit wireless speeds; walls, distance, and older clients lower that figure.
Compatibility and limits
Any of these routers works with a cable, fiber, or DSL modem or optical terminal that provides an Ethernet connection, and the provider’s gateway can usually be switched to bridge or passthrough mode. Check two limits: the service must be provisioned at gigabit speed at the modem, and devices limited to Wi-Fi 5 or 2.4 GHz will not reach gigabit wireless speeds on any router.
1. TP-Link Archer AX73 — Strong All-Rounder for a House
The Archer AX73 is a dual-band Wi-Fi 6 router rated AX5400, combining up to 4,804 Mbps on the 5 GHz band and 574 Mbps on the 2.4 GHz band under the manufacturer’s specification. It has a gigabit WAN port and four gigabit LAN ports, plus a USB 3.0 port for sharing storage on the local network. Six external antennas, OFDMA, and MU-MIMO suit a house where streaming, video calls, and downloads run at the same time.
Best setup: Place it centrally and elevated, connect the modem to the WAN port, and wire a desktop PC, console, or a small switch into the LAN ports for devices that need the full gigabit path. Keep latency-sensitive devices on the 5 GHz band and move smart-home gadgets to 2.4 GHz.
2. ASUS RT-AX86U — Gaming Pick with a 2.5G Port
The RT-AX86U is a dual-band Wi-Fi 6 router rated AX5700, with up to 4,804 Mbps on 5 GHz and 861 Mbps on 2.4 GHz in the manufacturer’s specification. Its distinguishing feature is a 2.5 Gbps port that can be configured for WAN or LAN use, alongside standard gigabit ports and a dedicated gaming port that prioritizes a connected console or PC. It also supports ASUS AiMesh, so a second compatible ASUS router can extend coverage instead of replacing this one later.
Best setup: For gaming, use the 2.5G port as the LAN link to your main PC if it has a matching network adapter, or as the WAN link if you later move to a multi-gig plan. Enable the router’s quality-of-service features for the gaming device, keep the PC wired rather than wireless, and use 5 GHz for nearby wireless devices. If you are also comparing provider and plan options, our guide to gaming internet explains what to check beyond headline download speed.
3. TP-Link Archer AX21 — Simple Pick for an Apartment
The Archer AX21 is a dual-band Wi-Fi 6 router rated AX1800, with up to 1,201 Mbps on the 5 GHz band and 574 Mbps on the 2.4 GHz band in the manufacturer’s specification. It provides a gigabit WAN port and four gigabit LAN ports, OFDMA, and MU-MIMO. Its wireless ceiling is lower than the models above, so it will not push a full gigabit to a single wireless client, but its wired ports pass gigabit traffic and its 5 GHz band is well matched to a smaller space where the router is never far from your devices.
Best setup: In an apartment, put the router in the main living area rather than a hallway cupboard, wire a TV box, console, or PC directly where possible, and let phones and laptops use 5 GHz. Avoid placing it next to a microwave or inside a metal cabinet, both of which weaken the signal in compact homes.
4. TP-Link Deco XE75 — Wi-Fi 6E Mesh for Larger Homes
The Deco XE75 is a tri-band Wi-Fi 6E mesh system rated AXE5400, adding a 6 GHz band alongside 5 GHz and 2.4 GHz. Each unit has gigabit Ethernet ports, and the units form a single network with one name, handing clients between nodes as you move around the home. Mesh is the practical answer when one router, however strong, cannot reach a back bedroom, home office, or upper floor through several walls.
Best setup: Connect the main unit to the modem, then place additional units partway toward the weak areas rather than inside them, where they can still receive a strong signal to repeat. Use a wired connection between units if your home has Ethernet runs, and connect Wi-Fi 6E-capable laptops and phones to the 6 GHz band for the cleanest high-speed link. Note that 6 GHz has shorter range than 5 GHz, so node placement matters more, not less.
How to Set Up a Router for a 1 Gig Plan
Placement
Put the router near the center of the area you use most, raised off the floor, and away from thick masonry and large metal appliances. For a two-floor house, a central position on the main floor usually serves both levels better than a basement corner. If one room still struggles, mesh or a wired access point is a better fix than a higher power setting.
Bands and channels
Give the 5 GHz (and 6 GHz, where available) bands to laptops, phones, and consoles used nearby, and leave 2.4 GHz for smart plugs, cameras, and devices at the edge of coverage. In apartment buildings, crowded 2.4 GHz channels are common; the wider 5 GHz channels are usually clearer. Let the router choose channels automatically first, and change them manually only if a neighboring network clearly overlaps yours.
Wire what matters
No wireless link is as consistent as a cable. Wire gaming PCs, workstations used for large transfers, and streaming boxes that sit near the router. That also frees wireless airtime for devices that cannot be wired. Use at least Cat5e Ethernet cable for gigabit links, and check that any switch in the chain is a gigabit model.
Which Router Fits Which Need?
- Apartment: The Archer AX21 covers a compact space, passes gigabit speeds over its wired ports, and keeps the setup simple.
- Family house: The Archer AX73 adds stronger 5 GHz throughput and capacity for many simultaneous devices.
- Gaming: The RT-AX86U adds a configurable 2.5G port, a prioritized gaming port, and a path to AiMesh expansion.
- Large or multi-floor home: The Deco XE75 spreads Wi-Fi 6E coverage across several nodes instead of relying on one location.
Conclusion
For most gigabit households, a Wi-Fi 6 router with gigabit ports, placed well and wired to the devices that matter, is enough to use a 1 gig plan properly. Step up to the RT-AX86U if gaming and a multi-gig port are priorities, and choose the Deco XE75 if coverage, rather than speed near the router, is the problem. Whichever model you pick, confirm the WAN port speed, match the bands to your devices, and test first with a wired connection.










