Long CD-era games routinely shipped on two, three or four discs, and the mid-game swap was part of the design: finish disc one, save when prompted, insert disc two, keep playing. Emulators handle the swap itself well enough, but the default setup around it is messy. Every disc image lands in your library as a separate entry, and worse, saves and memory card files are named after whichever disc you launched, so disc two can start up staring at an empty card.
As an Amazon Associate, we earn from qualifying purchases.
The fix is a tiny text file. An .m3u playlist lists a game’s disc images in order and becomes the single item you launch, giving the emulator one identity for the whole game: one library entry, one save file name, one list of discs to swap between. Everything here works with disc images you dumped from games you own, and the mechanics come from the emulators’ own documentation.
Disclosure: this article contains affiliate links, and we may earn a commission if you buy through them, at no extra cost to you.
Quick Answer
Create a plain-text file in the game’s disc folder, list one disc filename per line (the .cue file for BIN/CUE, the .chd file for CHD), and save it with an .m3u extension named after the game. Launch the .m3u instead of a single disc: one library entry, saves and memory cards named after the playlist so they carry across discs, and swaps from the disc control menu.
Why Separate Disc Entries Cause Trouble
A scanner sees files, not games: point it at a folder of disc images and a four-disc RPG becomes four near-identical entries, three of which you should never launch directly. The clutter is annoying, but the save problem is the real trap. In RetroArch’s PlayStation cores, the memory card file is named after the content you loaded — start from disc one and the card carries disc one’s name; boot disc two on its own and the core looks for a differently named card, so your swap-prompt save is not the one the game reads.
Launching discs separately also makes the swap clumsier: with no declared set, you browse the file system mid-game and pick the next image by hand, hoping you grab the right region and revision. The m3u removes all three problems by declaring that these files are one game, in this order.
The m3u Format, Line by Line
An .m3u is a plain-text file with one disc filename per line, in play order. Two details decide whether it works. First, list the file the emulator actually opens: for BIN/CUE dumps that is the .cue sheet, not the .bin, because the cue describes the tracks; for CHD sets, list the .chd files. Second, keep paths relative: libretro builds the playlist in the same folder as the discs and lists bare filenames, which keeps the folder portable — move it and the playlist still resolves.
Name the playlist after the game, without a disc number: libretro’s example pairs Metal Gear Solid (USA) (Disc 1).cue and (Disc 2).cue with a file called Metal Gear Solid (USA).m3u. Making one takes four steps: put all the disc files in one folder, create a text file there, type each filename on its own line in order, then save and change the extension from .txt to .m3u. A content scan then adds the m3u as one library entry instead of one per disc.
Swapping Discs in RetroArch
When a PlayStation or Saturn core is running, RetroArch’s Quick Menu gains a Disc Control section built around a disc index, like a CD changer. Loading the game through its m3u pre-fills that changer with every disc in the list, so a swap is opening Disc Control and changing the Current Disc Index to the next number. Without a playlist, Disc Image Append adds an image on the fly, and Eject Disc followed by Insert Disc covers the manual route.
One documented quirk matters: a menu swap is an instant tray close, and a few games need to sense a real eject — libretro’s example is Metal Gear Solid. The workaround: set the Disc Index to No Disc, leave the menu briefly so the game registers the empty tray, then reopen Disc Control and pick the correct disc.
Swapping Discs in DuckStation
DuckStation attacks the problem from the game list side: its feature list includes merging multi-disc games in the game list and grid, with memory cards shared between discs, so a scanned set appears as one entry, one card serving every disc. It can also switch to the next disc automatically when a supported game stops the CD-ROM motor at the swap point. For a manual change, the System menu’s Change Disc option picks a different image while the game keeps running.
An m3u still earns its place here: it states the disc order explicitly and stays valid if you reorganise folders or play the same set in RetroArch. Either way, the shared card is the point — disc two reads the card disc one saved to.
Swapping Discs in PCSX2
PCSX2 is the exception: it does not use m3u playlists. PlayStation 2 multi-disc releases exist — Star Ocean: Till the End of Time and Shadow Hearts: Covenant shipped on two discs — but PCSX2 handles them with a direct swap instead. While the game is running, open the pause menu and use Change Disc, then select the next disc image; the emulator exchanges the virtual disc without a restart.
Saves need no planning: PCSX2 keeps progress on virtual memory card files that belong to the emulator, not the loaded disc, so the slot one card is identical before and after a swap. Keep one discipline — swap to the same region and revision you started with, because a save made on one edition is not read by another.
Why Your Saves Follow the Playlist
The carrying mechanism is naming. Because memory card and save files take the launched item’s name, launching the m3u gives every disc the same card: the playlist’s. That is also the recovery route if you already played disc one before making a playlist. RetroAchievements’ documentation spells it out: find the save named after disc one, such as Metal Gear Solid (v1.1) (Disc 1).mcr, and rename it to match the playlist, Metal Gear Solid (v1.1).mcr. The next launch through the m3u picks the renamed card up, and save states follow the same logic: a state made under a single-disc name belongs to that name.
Naming Discipline That Keeps It Working
Four habits keep the system boring. Keep one folder per game, holding every disc image and the m3u together. Name discs identically except for the disc number — same title, same region tag, (Disc 1), (Disc 2) — and list them in that order. Do not rename anything after starting, because save files point at the names you launched with; if you must rename, rename the saves to match. Finally, build the set from one edition — same region, same revision, one dump method — so the playlist never mixes versions mid-story.
Storage and a Drive for a Disc Library
Multi-disc sets are bulky — even CHD sets take real space, BIN/CUE sets more — so the library wants fast, roomy storage, plus a drive for making images from your own discs.
Samsung 990 PRO 2TB NVMe SSD
- Specs: 2TB capacity, M.2 2280 form factor
- Specs: PCIe 4.0 x4 interface, NVMe 2.0
- Specs: Up to 7,450 MB/s read and 6,900 MB/s write, as stated by Samsung
A fast internal home for the main library: quick scans, quick loads, room for a large CD collection.
WD_BLACK SN850X 2TB NVMe SSD
- Specs: 2TB capacity, M.2 2280 form factor
- Specs: PCIe 4.0 x4 interface
- Specs: Up to 7,300 MB/s read and 6,600 MB/s write, as stated by WD
The same job: hold the whole multi-disc shelf internally and leave swaps to the menu, not the storage.
Samsung T7 Portable SSD 2TB
- Specs: 2TB capacity in a pocket-size enclosure
- Specs: USB 3.2 Gen 2 over USB-C
- Specs: Up to 1,050 MB/s read and 1,000 MB/s write, as stated by Samsung
For carrying the library between desktop, laptop and handheld PC: m3u folders move as-is, since their paths are relative.
WD Elements Portable Hard Drive 5TB
- Specs: 5TB capacity, 2.5-inch portable drive
- Specs: USB 3.0 connection, bus powered with no mains adapter
- Specs: Ships formatted NTFS for Windows; reformat for other systems
The archive tier: slower than an SSD, but the roomiest way to keep every disc set, spares included, in one place.
LG BP60NB10 External Blu-ray Drive
- Specs: Slim external drive for Blu-ray, DVD and CD media
- Specs: USB 2.0 connection, bus powered
- Specs: Reads and writes discs, including M-DISC support as stated by LG
The drive that starts the chain: read your own PlayStation and PlayStation 2 discs on a modern PC and turn them into the images your playlists list.
How to Choose
Choose the m3u method if you play in RetroArch or DuckStation and hold more than a couple of multi-disc games: one minute per game buys a clean library, automatic save continuity and menu-driven swaps. It also suits anyone who renames or moves folders, since relative paths travel well. Separate entries are tolerable only for one short game you will finish and never revisit — and even then the playlist costs almost nothing. PCSX2 players skip the file and rely on Change Disc, keeping only the same-region discipline.
Who Should Skip
Skip this setup if your library is all single-disc games, if you play PS2 titles only (PCSX2 does not use playlists), or if your frontend already merges your multi-disc sets and shares their saves. Also skip it mid-playthrough if you will not rename one save file: finish on the setup you started with and adopt playlists for the next title.
FAQ
Does the m3u change or compress my disc images?
No. It is only a list of filenames. The images stay exactly as they are, in whatever format you dumped them, and deleting the playlist deletes nothing but the list.
My save vanished after I switched to the m3u. Where did it go?
It is still on disk, named after the single disc you launched. Rename that save or memory card file to match the playlist’s name, then launch through the m3u and the game reads it again.
Can I use an m3u for a game with only one disc?
You can, but there is no benefit: nothing to swap, no second entry to merge. Playlists pay off from two discs upward.
Does PCSX2 read m3u files for its multi-disc games?
No. PCSX2 swaps discs directly with the Change Disc option in its pause menu, and its virtual memory cards are independent of the loaded disc, so saves carry over without any playlist.
Final Verdict
The m3u playlist is the smallest file in your emulation folder and the one that removes the most friction: one library entry per game, saves that follow you across every disc, and swaps handled by a menu, not a file browser. Build one per multi-disc game, keep the naming tidy, and the CD-era disc change becomes what it was on real hardware — a ten-second pause, not a troubleshooting session.











