Wooden PC cases pair a steel chassis with a real wood front or wood trim, so a gaming build can sit in a living room or study without looking like industrial equipment. The wood is usually an accent rather than the structure itself, which matters for fit and cooling: the frame, fan mounts and clearances still follow standard ATX layouts. This guide compares four cases that use walnut or oak fronts and remain listed for US buyers, using manufacturer-published dimensions for planning. Figures below are maker specifications, not independent measurements, so confirm GPU length, cooler height and radiator thickness against your own parts before ordering.
As an Amazon Associate we earn from qualifying purchases.
What to check before you choose
Start with motherboard size. ATX, Micro-ATX and Mini-ITX boards fit most mid-towers, while E-ATX and SSI-EEB boards need a wider tray and standoff layout. Next, check graphics card clearance with your cooling plan in place, because a front radiator reduces usable GPU length. CPU cooler height, power supply length, front I/O and fan headers also matter: a case with USB Type-C still needs a matching header on the motherboard, and extra fans need PWM headers or a hub. Warranty terms vary by brand and seller, so keep the invoice and confirm coverage on the product page.
Fractal Design North
The Fractal Design North is the reference point for this category, with a real walnut or oak front, open mesh ventilation and brass or steel details depending on version. Fractal lists support for ATX, Micro-ATX and Mini-ITX motherboards, graphics cards up to 355 mm with front fans mounted, and up to 300 mm when a 360 mm front radiator is installed. CPU cooler height is listed up to 170 mm, with front radiator support up to 360 mm and top support up to 240 mm. Two 140 mm Aspect PWM fans are included on the standard version, and power supply length depends on drive tray configuration, listed up to 255 mm with one tray. Choose this case if you want a furniture-friendly mid-tower for a single-GPU ATX build and you can work within the 355 mm card limit.
Lian Li LANCOOL 217
The Lian Li LANCOOL 217 uses genuine walnut trim on the black model and lighter wood trim on the white model, over a steel mesh front. Lian Li lists broad motherboard support, including SSI-EEB up to 330 mm wide, E-ATX up to 280 mm wide, ATX, Micro-ATX and Mini-ITX, plus back-connect support for ATX and Micro-ATX boards. Graphics card clearance is listed up to 380 mm, CPU cooler height up to 180 mm, and power supply length up to 220 mm in standard orientation or 180 mm when rotated. Five PWM fans come pre-installed: two 170 mm front fans, two 120 mm reverse-blade fans above the shroud and one 140 mm rear fan. Radiator support is at the top, up to 360 mm. This suits builders who want many fans included and room for large boards, as long as a top radiator plan works for the build.
Montech XR Wood
The Montech XR Wood is a mid-tower with a genuine walnut front accent, tempered glass side panel and mesh front section for intake. Montech lists support for ATX, Micro-ATX and Mini-ITX motherboards, graphics cards up to 420 mm, CPU coolers up to 175 mm and power supplies up to 230 mm. Four 120 mm GF120 ARGB PWM fans are pre-installed, three at the front and one at the rear, and radiator support includes up to 360 mm at the top and up to 280 mm at the front in published tables. Front I/O includes USB Type-C, two USB 3.0 Type-A ports and a combo audio jack, so check your motherboard headers for full function. Pick this model when card length is the priority and you want the wood accent without giving up a glass side view.
Antec C8 Wood
The Antec C8 Wood is a dual-chamber full-tower with a wooden front panel, panoramic tempered glass and separate zones for the main components and the power supply. Antec lists support for E-ATX up to 280 mm wide, ATX, Micro-ATX and ITX motherboards, graphics cards up to 440 mm, CPU coolers up to 175 mm and power supplies up to 210 mm without cables. Radiator support reaches 360 mm at the top, side and bottom, with 120 mm at the rear, and fan support covers 120 mm, 140 mm and 160 mm options depending on position. Fans are not included on this listing, so budget time and headers for a full fan set. This is the choice for a showcase build that needs long-card room and several radiator positions.
How the four compare
For a compact ATX desk build, the Fractal Design North keeps the footprint modest and the wood front prominent, but the card limit is the tightest here. For included fans and large-board support, the LANCOOL 217 stands out, with the trade-off that radiators mount only at the top. For long graphics cards in a mid-tower, the XR Wood lists the most card room of the three mid-towers. For a full-tower showcase with dual chambers, the C8 Wood offers the largest interior and the most radiator positions, at the cost of size and separate fan purchases. If you are still deciding between wood-front and all-metal designs, our broader roundup of PC cases compared side by side can help narrow the layout first.
Final checks
Measure your graphics card from bracket to end, add fan or radiator thickness where relevant, and compare that total with the maker limit for the exact configuration you plan. Confirm cooler height against side-panel clearance, power supply length against drive cages, and front-panel cables against motherboard headers. Wood fronts vary in grain and tone between units, and care is simple: dust with a dry cloth and keep liquids away from the panel. With those checks done, any of these four can anchor a build that looks at home outside a dedicated gaming room.










