- Top Pick: SanDisk 1TB Extreme microSDXC Card
- Runner-up: Samsung EVO Select 512GB microSDXC Card
- Also consider: SanDisk 256GB High Endurance microSDXC Card
Batocera turns the Steam Deck into a dedicated retro console without changing anything about the Deck itself. The whole system lives on a microSD card: flash the image, hold two buttons at power-on, pick the card in the boot menu, and the Deck starts into a console-style front-end with emulators for dozens of classic systems built in. Shut it down, and the next normal power-on goes straight back to SteamOS, exactly as it was.
As an Amazon Associate, we earn from qualifying purchases.
This guide covers the Deck-specific route from start to finish: the right image, flashing the card, the first boot, controllers and audio, adding your own game backups and BIOS files, scraping artwork, and the optional step that makes Batocera the default boot. The internal SSD stays untouched throughout, because Batocera never installs anything there.
This article contains affiliate links, and we may earn a commission when you buy through them at no extra cost to you.
Quick Answer
Download the regular x86_64 Batocera image, flash it to a microSD card with Raspberry Pi Imager or balenaEtcher, and insert the card into the Deck. Power on while holding Volume Down and Power, then choose the card in the boot menu. Batocera expands its storage partition on first boot, and SteamOS on the internal SSD is never modified.
Why Run Batocera Next to SteamOS
SteamOS already handles emulation through individual apps, so the appeal of Batocera is focus: one card holds a complete, self-contained retro setup, with front-end, emulators, saves, settings and artwork travelling together. Nothing is installed into SteamOS, and the experiment is reversible by booting without the card. The Batocera wiki notes that Batocera 36 was the first official release for the Steam Deck, and the Deck uses the same image as the regular x86_64 build.
What You Need
You need the Steam Deck itself, a microSD card, and a computer with a card reader for flashing; the Deck’s built-in controls do the rest. Card size is the one real decision. A smaller card suits a curated library of cartridge-era games, which are tiny. Disc-based libraries grow fast: PlayStation, Saturn and GameCube backups are hundreds of times larger than a SNES ROM, so a big disc library calls for the largest card you are comfortable buying. A fast card also matters, because the system itself runs from it; look for A2-rated cards from known brands.
Step 1: Download the Batocera Image
Go to the download section on batocera.org and take the x86_64 image. Per the Batocera wiki’s handheld PC page, the Steam Deck uses the same image as a regular x86_64 PC, so the standard download is the correct file. It arrives as a compressed image ending in .img.gz, which the flashing tools handle directly.
Step 2: Flash the Image to the Card
The Batocera wiki’s install instructions name Raspberry Pi Imager, with balenaEtcher and USBImager as alternatives. In Raspberry Pi Imager, choose the custom image option, point it at the downloaded file, then select the microSD card as the target. Flashing erases everything on the card, so double-check the destination before confirming. When the write finishes, your computer may offer to format the card because it does not recognise the layout; decline that prompt every time, or it will wipe what you just wrote. A finished card holds a small BATOCERA boot partition and a SHARE partition that expands on first boot.
Step 3: First Boot From the Boot Menu
Insert the card into the Deck’s microSD slot. With the Deck powered off, press and hold the Volume Down and Power buttons; this opens the boot menu, exactly as the wiki describes. Select the microSD card and Batocera starts. The first boot runs long because Batocera expands the SHARE partition to fill the card, then reboots itself; let it finish without powering off. From then on: Volume Down plus Power for Batocera, a plain power press for SteamOS.
Step 4: Controllers and Audio
The Deck’s built-in controls are recognised as the primary gamepad, so no external controller is required. Even so, run the controller configuration once so the hotkey shortcuts behave: open the main menu with Start, go to Controller & Bluetooth Settings, choose Configure a Controller, and follow the prompts. When asked for a Hotkey, most people assign Select; it combines with other buttons for shortcuts such as quitting back to the menu. Bluetooth controllers pair from the same menu for docked or multiplayer play. Sound comes through the speakers or headphone jack as with any Deck software.
Step 5: Add Your Games and BIOS Files
Batocera ships with only a small set of freely distributable games and no BIOS files, so the library is yours to supply from backups of games you own. With Batocera running, the easiest route is the network share: the system appears on your local network as BATOCERA, and you can open its share folder from another computer and copy files across. Pressing F1 opens a built-in file manager as an alternative. Inside SHARE, games live in the roms folder, one subfolder per system; drop each backup into its system’s folder, then choose UPDATE GAMELISTS so new titles appear.
Some systems also need a BIOS file dumped from your own hardware; those go in the bios folder on SHARE. To see exactly what your build expects, open SYSTEM SETTINGS and run the MISSING BIOS checker, which lists the required file paths per system. Only systems you actually play need their files.
Step 6: Scrape the Artwork
A plain list of filenames works, but scraped box art makes the library feel finished. Connect the Deck to Wi-Fi, open the scraper from the main menu, pick a metadata source, and let it process the systems you added. Artwork and descriptions are stored on the card alongside the games.
What Performance to Expect
The Batocera wiki sums up the Deck plainly: it runs systems up to the sixth generation, and the easier seventh-generation titles, at full speed, and begins to struggle with harder seventh-generation games. In practice, cartridge consoles, PlayStation and Nintendo 64 are comfortable territory, most Dreamcast and GameCube games play well, and the demanding end of the PlayStation 2 and Wii catalogues is where frame rates stop being consistent. Loading is a touch slower from microSD than from the internal SSD, though in-game performance is governed by the emulators.
Optional: Make Batocera the Default Boot
If Batocera becomes your main use for the Deck, the wiki documents a way to make the card the default boot device. Turn the Deck on holding Volume Up and Power, releasing when it beeps. Use the D-pad to open the Setup Utility, go to the Boot category, and select Add Boot Options. Choose First, which is the SD card slot, then go to Exit and select Save and Exit. The Deck now boots Batocera whenever the card is inserted, and SteamOS whenever it is not.
The Honest Limits
This setup asks a few things of you. The card has to be in the slot every time you boot Batocera, so owners of the smallest Steam Deck model, who rely on that slot to expand SteamOS storage, face a real either-or choice. SteamOS features do not carry over: no per-game Steam Input configuration, no TDP tuning, and no access to your Steam library from inside Batocera. Batocera updates also land on the card independently, so the two systems are maintained separately.
Gear Worth Considering
SanDisk 1TB Extreme microSDXC Card
The roomiest sensible pick for a disc-heavy library, with fast transfers when copying large backups from a PC.
Specs:
- Capacity: 1TB microSDXC, model SDSQXAV-1T00-GN6MA
- Read speed: up to 190 MB/s with a compatible reader
- Write speed: up to 130 MB/s
- Ratings: Class 10, U3, V30, A2
- Includes a full-size SD adapter
Samsung EVO Select 512GB microSDXC Card
A middle ground that holds a large mixed library of cartridge and disc games.
Specs:
- Capacity: 512GB microSDXC, model MB-ME512KA/AM
- Read speed: up to 130 MB/s
- Ratings: UHS-I U3, A2, V30
- Includes a full-size SD adapter
- Four-proof protection against water, temperature, X-rays and magnets
SanDisk 256GB High Endurance microSDXC Card
Built for constant rewriting in dash cams, which suits a card that will be flashed, updated and written to for years.
Specs:
- Capacity: 256GB microSDXC, model SDSQQNR-256G-GN6IA
- Read speed: up to 100 MB/s
- Write speed: up to 40 MB/s
- Ratings: Class 10, U3, V30
- Rated for up to 20,000 hours of Full HD recording
UGREEN USB 3.0 SD Card Reader
A reader makes flashing and bulk file transfers quick, and this dual-slot model reads both SD and microSD cards over USB 3.0.
Specs:
- Model: 40752
- Interface: USB 3.0, up to 5 Gbps
- Slots: SD and microSD, UHS-I cards supported
- Compatibility: Windows, macOS, Linux and Chrome OS
- Simultaneous reading can reduce transfer speed
Samsung T7 Portable SSD 1TB
Not for the Deck’s slot, but useful beside it: a fast drive for keeping your master game backups and card images on the flashing PC.
Specs:
- Capacity: 1TB, model MU-PC1T0T/AM
- Interface: USB 3.2 Gen 2
- Read speed: up to 1,050 MB/s
- Write speed: up to 1,000 MB/s
- AES 256-bit hardware encryption, shock resistant
How to Choose
Start with the library, not the hardware. A cartridge-focused collection fits a mid-size card, while PlayStation 2 and GameCube backups push you toward the largest capacities. Speed ratings matter second; an A2-rated card from a known brand keeps the front-end responsive. Buy from a reputable seller, because counterfeit high-capacity cards are common. Finally, decide honestly whether your Deck’s slot is free: if SteamOS already depends on a card for storage, this project competes for the same slot.
Who Should Skip
Skip this if your Steam library is the main reason you own the Deck and emulation is an occasional extra; installing emulators inside SteamOS keeps everything in one place. Skip it if you own the smallest Deck model and its microSD slot is already your SteamOS storage. Skip it if you want per-game controller profiles and power tuning, since those SteamOS comforts do not exist inside Batocera. And skip it if the demanding end of the PlayStation 2 catalogue is your main goal, because the Deck struggles there regardless of the system running the emulator.
FAQ
Does Batocera erase or change SteamOS?
No. Batocera lives entirely on the microSD card and boots only when you select the card from the boot menu. SteamOS, your library and your saves on the internal SSD are never modified, and removing the card returns the Deck to stock behaviour.
Can Batocera be the default without deleting anything?
Yes. The Batocera wiki documents a boot-order change in the Deck’s Setup Utility that puts the SD card first. With the card inserted the Deck starts Batocera; without it, SteamOS starts as normal.
Which systems run well on the Deck under Batocera?
Per the Batocera wiki, systems up to the sixth generation and easier seventh-generation titles run at full speed, while harder seventh-generation games begin to struggle. Expect the most consistent results from cartridge consoles, PlayStation and Nintendo 64, and more variable results at the demanding end of PlayStation 2.
Where do BIOS files go, and how do I know which ones I need?
BIOS files dumped from your own hardware go in the bios folder on the card’s SHARE partition. The MISSING BIOS checker, under SYSTEM SETTINGS, lists the exact files and paths your installed version expects per system.
Final Verdict
Batocera on a microSD card is the cleanest way to give the Steam Deck a second life as a retro console: one flash, one button combination, and a complete emulation setup that leaves SteamOS alone. The trade-offs are real but narrow, mainly the occupied card slot and the loss of SteamOS conveniences. For a focused library of your own game backups, it is hard to beat.











