✅ Updated Nov 2026
Affiliate Disclosure: As an Amazon Associate, we earn from qualifying purchases. Links marked "Check on Amazon" are affiliate links — learn more.
⭐ Key Takeaways
Quick answer: Our top pick is Lenovo Legion Go S (Z2 Go, 16GB, 512GB), with SanDisk 1TB Extreme microSDXC Card as a strong alternative.

The Nintendo 3DS asks a question no other retro system does: where does the second screen go? On the Legion Go S you have one 8-inch panel, two screens to show, and a touchscreen that can stand in for the original stylus. Azahar, the actively developed successor to Citra, answers with more layout options than any 3DS emulator before it.

As an Amazon Associate, we earn from qualifying purchases.

This walkthrough covers the Windows model end to end: installing Azahar, loading games dumped from your own 3DS, choosing a layout for a single panel, setting a resolution the Z2 Go can hold, and mapping controls so the bottom screen stays reachable. Every game and system file comes from hardware you own.

This article contains affiliate links, and we may earn a commission if you buy through them.

Quick Answer

Install Azahar from the project’s releases, add decrypted games dumped from your own 3DS, and pick the Vulkan renderer. On the Go S panel, Large Screen or Side by Side layouts suit most games; Separate Windows suits a docked monitor. Start at 3x resolution, map the Circle Pad to the left stick, and use a low Legion Space power preset: 3DS emulation is light work for the Z2 Go.

What the Z2 Go Brings to 3DS Emulation

Azahar’s published requirements are modest: 64-bit Windows 10 or newer, an x86-64 processor with SSE4.2 support and a single-core PassMark score above 1,800, graphics with OpenGL 4.3 or Vulkan 1.1, and 2 GB of memory minimum with 4 GB recommended. The Z2 Go clears every line: four Zen 3 cores pass the single-core bar, the integrated Radeon graphics support Vulkan, and the 16 GB of LPDDR5x memory is four times the recommended figure. The practical consequence is that the settings in this guide are limited by the screen and the battery, not by the chip.

Install Azahar on the Windows Go S

Download Azahar from the project’s official site or its GitHub releases page — the 2126 series is the current stable line, and alpha builds are best left alone, because save states made on an alpha will not load in a stable release. On Windows you get an installer or a portable zip; the portable build suits a handheld better, keeping everything in one folder you can back up as a unit.

Run it once, then add it to Legion Space so it launches from the gamepad-friendly side of the machine. In the graphics settings, set the API to Vulkan and confirm the physical device is the Radeon graphics. Leave everything else at defaults; layout and resolution come next.

Your Own Games and System Files

Azahar does not include games or Nintendo system files, and it does not run encrypted dumps. What it loads are decrypted files produced on your own 3DS using the project’s documented dumping routes: decrypted .3ds or .cci images and .cxi files open directly once you add their folder to the game list, a decrypted .cia package is installed through File, then Install CIA, and .3dsx files cover homebrew. If a game refuses to appear or boot, an encrypted dump is the usual cause — re-dump it on the console rather than hunting for another copy.

System files are a narrower question. Most games run without any, but some software leans on data that only exists on real hardware — shared system fonts and Mii data are the common examples, and missing Mii data shows up as blank or broken faces in Mii-centred games. Azahar’s system-files guidance explains how to transfer what is needed from your console; treat it as a targeted repair for a specific symptom, not a step everyone must complete first.

Two Screens on One Panel: Layout Choices

The Layout menu is where this setup is won or lost. Azahar offers Default, Single Screen, Large Screen, Side by Side, Separate Windows, Hybrid Screen and a Custom Layout editor. On the Go S’s single panel, three earn their place.

Large Screen keeps the top screen dominant and the touch screen small beside it — the closest match to how most 3DS games divide attention. Side by Side gives both screens equal width, suiting titles that use the bottom display as a real second view, at the cost of a smaller main image. Separate Windows puts each screen in its own window: on one panel that means dragging two windows into place, but docked it becomes the best layout of all, panel as touch screen, big display up top. Single Screen plus a swap hotkey covers games whose bottom screen is only a map or menu.

Whichever you pick, keep the bottom screen touchable. The panel is a 10-point touchscreen, and Azahar reads taps as stylus input — a fingertip works, a capacitive stylus is finer for small targets.

Resolution Restraint on the Z2 Go

The 3DS top screen renders at 400×240, so Azahar’s internal resolution is a simple multiplier: 2x is 800×480, 3x is 1200×720, 4x is 1600×960 and 5x is 2000×1200. Against a 1920×1200 panel, 5x overshoots the width in any layout showing both screens, and even alone buys nothing the display can show. Start at 3x, crisp in Large Screen and Side by Side, and treat 4x as the ceiling for games that live on the top screen. Raise the multiplier one step at a time, only for games that stay smooth — a handful of titles are limited by emulation accuracy rather than graphics power, and no setting fixes those.

Controls: Legion Space Modes and Azahar Mapping

Set the Go S to gamepad mode in Legion Space before mapping, so Azahar sees the built-in controls as one standard pad. In the Controls panel, map the Circle Pad to the left stick, the D-pad and face buttons to their natural counterparts, the shoulders to the bumpers and triggers, and the New 3DS C-Stick to the right stick for games that use it.

Two assignments deserve the rear buttons: the screen-layout swap, so Single Screen games can flash the bottom display up when needed, and a save-state shortcut. Keep touch for the bottom screen rather than mapping a stick to the stylus — few 3DS games reward analogue touch.

Power Modes and Battery, in Words

Legion Space offers preset power modes plus a custom option, and 3DS emulation belongs on the quiet end of them. At native or 3x resolution, most games ask so little of the Z2 Go that the lowest preset keeps the fan near silent and stretches the 55.5Wh battery furthest. Step up one preset for 4x play or the few demanding titles, and reserve the highest mode for docked sessions. Match mode to multiplier: resolution is what you spend power on, so a game dropped from 4x to 3x can usually drop a preset too.

Saves: Keep the Ones That Matter

Azahar keeps saves inside its user directory — the folder the portable build keeps next to the program. In-game saves are the durable record, so use them at natural stopping points: save states are tied to the build that made them, and a state from a different version may refuse to load. Back up the whole Azahar folder before updating or moving machines — to the microSD card for a local spare, to an external drive for a real backup. Restoring is just copying it back.

Gear That Fits This Setup

Lenovo Legion Go S (Z2 Go, 16GB, 512GB)

Lenovo Legion Go S (Z2 Go, 16GB, 512GB)

Lenovo Legion Go S (Z2 Go, 16GB, 512GB)

Check price on Amazon

The machine itself, in the configuration this guide is written for — the Windows model, since the SteamOS variant uses a different install route.

Specs:
– Processor: AMD Ryzen Z2 Go, four cores, eight threads
– Memory: 16 GB LPDDR5x-6400
– Storage: 512 GB SSD, microSD slot for cards up to 2 TB
– Display: 8-inch 1920×1200, 48-120Hz variable refresh, 10-point touch
– Battery: 55.5Wh
See it on Amazon

SanDisk 1TB Extreme microSDXC Card

SanDisk 1TB Extreme microSDXC Card

SanDisk 1TB Extreme microSDXC Card

Check price on Amazon

A 1 TB card swallows a full 3DS library alongside every other system this handheld emulates, with an adapter for moving dumps from a PC.

Specs:
– Capacity: 1 TB microSDXC, model SDSQXAV-1T00-GN6MA
– Read speed: up to 190 MB/s as stated by SanDisk
– Write speed: up to 130 MB/s as stated by SanDisk
– Ratings: C10, U3, V30, A2
See it on Amazon

MEKO Universal Stylus, 2-Pack

MEKO Universal Stylus, 2-Pack

MEKO Universal Stylus, 2-Pack

Check price on Amazon

The 3DS bottom screen was designed for a stylus, and a plain capacitive pen is the closest match on this panel — no pairing, no charging, a fine disc tip for small targets.

Specs:
– Two pens, black, with six replacement tips
– Disc tip for precision, fibre tip on the other end
– Length 5.5 inches, weight 0.7 ounces

See it on Amazon

JSAUX 6-in-1 Docking Station HB0609

JSAUX 6-in-1 Docking Station HB0609

JSAUX 6-in-1 Docking Station HB0609

Check price on Amazon

Docking turns Separate Windows into the best layout: the panel becomes the touch screen while a TV or monitor takes the top screen. JSAUX lists the Legion Go S among this dock’s supported handhelds; the maker states it does not pass through variable refresh.

Specs:
– HDMI output up to 4K at 120Hz as stated by JSAUX
– Gigabit Ethernet port
– USB-A and USB-C 3.2 Gen 1 ports
– USB-C power delivery input up to 100W

See it on Amazon

Samsung T7 Portable SSD 1TB

Samsung T7 Portable SSD 1TB

Samsung T7 Portable SSD 1TB

Check price on Amazon

A backup target for the Azahar folder and the wider library, with USB 3.2 Gen 2 transfers for copying a full setup between handheld and PC.

Specs:
– Capacity: 1 TB, model MU-PC1T0T/AM
– Read speed up to 1,050 MB/s, write up to 1,000 MB/s as stated by Samsung
– USB 3.2 Gen 2 interface

See it on Amazon

How to Choose

Choose your layout per game, not once for the library: Large Screen as the default, Side by Side for bottom-screen games, a swap hotkey for map-and-menu titles. Choose the portable Azahar build for a setup you can back up as one folder, the installer if you prefer ordinary Windows behaviour. Choose resolution by the panel, not the chip — 3x for two-screen layouts, 4x as a top-screen-only ceiling. Storage barely matters for load speed at 3DS file sizes, so the card’s real job is your other systems and your backups.

Who Should Skip

Skip this setup if your Go S runs SteamOS — Azahar has a Linux build, but the install route and file locations differ enough to deserve their own guide. Skip it if you no longer own a 3DS: Azahar needs decrypted dumps, and occasionally system files, from your own console, with no legitimate shortcut. Skip the resolution chase if you mostly play touch-heavy games — layout and stylus matter more there. And skip Separate Windows undocked; on one panel it is two windows to babysit.

FAQ

Can the Z2 Go run 3DS games at full speed?

Judged against Azahar’s published requirements — a single-core PassMark score above 1,800, Vulkan 1.1 graphics, 4 GB of memory recommended — the Z2 Go sits comfortably above the line, and most games hold full speed at 3x. A few titles are limited by emulation accuracy, not hardware, and behave the same on stronger PCs.

Do I need system files from my 3DS?

For most games, no. Azahar runs decrypted game dumps on its own. Some software needs data only a real console has — shared fonts and Mii data — and Azahar’s system-files guidance covers transferring it from your own 3DS.

Why will Azahar not load my game file?

The common cause is an encrypted dump: Azahar does not support encrypted files, so the game must be decrypted on your 3DS during dumping. The second cause is format: a .cia package is installed through the Install CIA option in the File menu, not opened like a cartridge image.

Final Verdict

The Legion Go S is an unusually natural 3DS machine: a big, sharp touchscreen panel, a chip that clears Azahar’s documented requirements without effort, and a battery that suits a light emulator. Set it up once — portable build, Vulkan, Large Screen at 3x, a swap hotkey on a rear button, saves backed up — and the second-screen problem mostly disappears.

Explore Our Guides & Free Tools