✅ Updated Nov 2026
Affiliate Disclosure: As an Amazon Associate, we earn from qualifying purchases. Links marked "Check on Amazon" are affiliate links — learn more.

Cheat codes in Dolphin come in two dialects that were born on two different machines. Gecko codes grew out of the Wii homebrew scene, while Action Replay codes are the GameCube system sold by Datel. Dolphin speaks both, but they live on separate tabs, follow different rules, and fail in different ways — so the first step to getting a code working is knowing which kind you are holding.

As an Amazon Associate, we earn from qualifying purchases.

This guide explains how each system works, how to enable codes and add your own by hand, and why a code that looks correct still does nothing — all for single-player games dumped from your own discs, played offline.

This article contains an affiliate link, and we may earn a commission if you buy through it, at no extra cost to you.

Quick Answer

Dolphin supports two cheat systems: Gecko codes, applied by its built-in code handler, and Action Replay codes for GameCube. Turn on Enable Cheats in the main configuration, then open a game’s Properties to tick codes on the Gecko Codes or AR Codes tabs, download a ready-made list, or paste in your own code.

Two Systems, Two Eras

A Gecko code is a short list of instructions written in pairs of hexadecimal words. On real hardware, a loader injected a small program — the Gecko code handler — into the game before it started, and the handler applied those instructions to the game’s memory as it ran. Dolphin reimplements that handler in software. When you enable a Gecko code, Dolphin patches the emulated memory at the moments the handler would have, so most codes take effect continuously — a value the game keeps resetting gets written again and again.

Action Replay codes predate that scene. Datel’s GameCube Action Replay stored codes encrypted on its own disc, and Dolphin handles the decryption internally — you paste the code in the same scrambled form it was published in, and Dolphin converts it before applying it. AR codes sit on their own tab and are applied as the game boots. Because the two systems were built by different people for different consoles, a code written for one cannot be pasted into the other’s tab and expected to work.

Turning Cheats On

Nothing happens until the master switch is on. In Dolphin’s main configuration window, the General tab carries an Enable Cheats checkbox; Gecko codes in particular do nothing while it is off. With that set, right-click any game in your library and open Properties. Two tabs matter: Gecko Codes and AR Codes. Each lists the codes Dolphin knows for that exact game, with a checkbox beside every entry.

The Gecko Codes tab also has a Download Codes button, which pulls a ready-made list for your game’s ID from the community code database Dolphin queries — codes already matched to your region and revision. The AR Codes tab works the same way minus the download route: codes there are added manually with the Add button. Either way, ticking a box is what activates a code — a code that is listed but unticked is inert.

Adding a Code by Hand

Behind the tabs, Dolphin stores codes in the game’s INI configuration file, and reading it once teaches you the whole format. Gecko codes live under a [Gecko] heading; Action Replay codes under [ActionReplay]. Each code starts with a name line — a dollar sign immediately followed by the name shown in the tab list — and the code lines follow beneath it. A separate [Gecko_Enabled] or [ActionReplay_Enabled] section repeats the name lines of the codes you have ticked. In the block below, (dollar) stands in for that dollar-sign character, and the X characters are placeholders for the code’s real hex digits:

[Gecko]
(dollar)Placeholder Example Code
XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX

Each code line holds two groups of eight hexadecimal digits. The first group usually encodes an instruction type plus a memory address; the second carries the value or a second address. You never need to decode this by hand — the point is structural. If a pasted code fails, the cause is usually visible in the block: a missing name line, code lines pasted under the wrong heading, or lines copied with stray spaces or missing digits. The Add dialog asks for the same two pieces — a name and the code lines — and writes the block for you.

Why Codes Fail

The most common failure is a version mismatch. A code is written against one specific build of a game: one region, one revision. The addresses it writes to are only correct for that build, so a code published for the European release does nothing useful in the North American one, and a later disc revision can shift addresses just as surely. This is why the download route is safer than a random forum post — the database entry is keyed to the same game ID Dolphin reads from your dump.

Two smaller traps follow. Some code sets require a master code: an enabling entry, usually listed first and marked as required, without which the rest of the set is ignored. And a minority of Gecko codes were written expecting a particular code-handler hook type — the point in the game’s frame loop where the handler runs. Real-hardware loaders let you choose the hook; if a code’s notes name one Dolphin does not use, that code may never trigger. When a code fails silently, check region first, master code second, hook notes third.

Where Cheats Are Not Allowed

Codes are for offline play. Dolphin’s netplay keeps every player’s emulation in lockstep, and a cheat changing one player’s memory would break that sync instantly, so cheat codes have no place in netplay sessions. The same principle runs through the wider scene: achievement-tracking modes treat any active cheat as disqualifying, because a written memory value is indistinguishable from an earned one. Keep cheat-enabled saves separate from any save you would present as a legit run.

Save states need the same care. A state captures the emulated memory exactly as it stands, cheat-modified values included. Loading an old state can therefore resurrect an effect you thought you had switched off, and a normal save written to the virtual memory card while a code was active keeps whatever the code changed — extra items stay in the inventory after the code is unticked. Turn codes off before saving progress you intend to keep clean: one-time writes are permanent in a way constant writes are not.

Gear That Makes Cheat Sessions Easier

Codes are only half the setup; the other half is controlling the game as it was designed to be controlled.

Nintendo GameCube Controller Adapter

Nintendo GameCube Controller Adapter

Nintendo GameCube Controller Adapter

Check price on Amazon

The official adapter is the reference for Dolphin’s native GameCube controller support, passing original pads through with analog triggers intact.

  • Specs:
  • Ports: 4 GameCube controller ports
  • Connection: USB, twin plugs (second plug powers rumble)
  • Compatibility: Wii U and Nintendo Switch consoles; native adapter support in Dolphin
  • Brand: Nintendo

See it on Amazon

Mayflash GameCube Controller Adapter (W012)

Mayflash GameCube Controller Adapter (W012)

Mayflash GameCube Controller Adapter (W012)

Check price on Amazon

Mayflash’s adapter adds a mode switch, so one unit serves both a Dolphin PC and a console.

  • Specs:
  • Model: W012
  • Ports: 4 GameCube controller ports
  • Modes: PC and Wii U / Switch switch on the unit
  • Cable: USB, 1.5 m
  • Rumble: supported when the second USB plug is connected

See it on Amazon

Mayflash DolphinBar (W010)

Mayflash DolphinBar (W010)

Mayflash DolphinBar (W010)

Check price on Amazon

Wii games expect a sensor bar and a real remote; the DolphinBar combines the Bluetooth receiver and infrared bar in one USB device built for Dolphin.

  • Specs:
  • Model: W010
  • Connection: USB, with built-in Bluetooth receiver
  • Remotes: up to 4 Wii Remotes, plus Nunchuk and Classic Controller
  • Modes: 4 working modes, including a Wii emulation mode for Dolphin

See it on Amazon

PowerA GameCube-Style Wireless Controller

PowerA GameCube-Style Wireless Controller

PowerA GameCube-Style Wireless Controller

Check price on Amazon

If no original pads are in a drawer anywhere, this wireless controller copies the GameCube layout — big A button, c-stick nub and all.

  • Specs:
  • Layout: GameCube-style face and triggers
  • Connection: Bluetooth wireless
  • Designed for: Nintendo Switch, pairs as a standard Bluetooth controller
  • Extras: motion controls and system buttons the original pad lacked

See it on Amazon

Samsung T7 Portable SSD 1TB

Samsung T7 Portable SSD 1TB

Samsung T7 Portable SSD 1TB

Check price on Amazon

A library dumped from your own discs adds up quickly, and cheat experiments go faster when games and save backups sit on quick external storage.

  • Specs:
  • Model: MU-PC1T0T/AM
  • Capacity: 1TB
  • Interface: USB 3.2 Gen 2, USB-C
  • Speeds: up to 1,050 MB/s read and 1,000 MB/s write, per Samsung

See it on Amazon

How to Choose

Start with the code, not the gear: confirm your game ID and revision, prefer the downloaded list for that exact build, and only hand-paste codes published for your region. For hardware, match the controller to the console you emulate most — an adapter and original pads for GameCube accuracy, a DolphinBar and real remotes for Wii pointer games, a modern wireless pad when convenience beats authenticity. Storage size follows your library: count your dumps first.

Who Should Skip

Skip cheat codes entirely if you play over netplay, chase achievements, or are mid-run in a game whose save you would hate to corrupt — a one-time write can follow that save forever. Skip the manual INI route if editing configuration files annoys you; the tabs and the download button cover most needs. And skip codes for a game you have not finished at least once: half the fun of a cheat is knowing exactly which rule you are breaking.

FAQ

Do Gecko codes work on GameCube games in Dolphin?

Yes. Although the Gecko format came from the Wii scene, Dolphin’s code handler applies Gecko codes to GameCube games as well. Action Replay remains the native GameCube system, but many popular GameCube codes were later converted to Gecko format.

Why does a code show in the list but do nothing?

Work through the usual suspects: Enable Cheats is off, the box beside the code is unticked, the code was written for a different region or revision, a required master code is missing, or the code expects a code-handler hook Dolphin does not use. Region mismatch causes most cases.

Can I turn a code off and undo what it did?

Constant-write codes stop applying the moment you untick them, but anything already written into a save file stays written. If a code granted items or currency that the game then saved, unticking does not remove them. Load a save or state from before the code ran to truly undo it.

Are cheat codes safe for my save files?

Mostly, but not guaranteed. A code writing to a wrong address — usually a region mismatch — can corrupt memory in ways that reach a save. Keep a backup of your memory card file before experimenting, and test new codes in a throwaway session before letting them near a long-running save.

Final Verdict

Dolphin’s cheat support is two systems in one coat: Action Replay for the GameCube era, decrypted and applied automatically, and the Gecko handler for the Wii era, switched on through Enable Cheats and managed per game. Pull codes matched to your exact game build, learn the simple INI block so you can spot a malformed paste, and respect the two hard limits — no cheats in netplay or achievement contexts, and no clean undo for values already saved. Do that, and codes become a safe way to replay your own games by your own rules.

Explore Our Guides & Free Tools