- Top Pick: Lenovo Legion Go 2
- Runner-up: Lenovo Legion Go S
- Also consider: ASUS ROG Xbox Ally
RetroAchievements is a free community project that bolts a modern achievement system onto classic games. Volunteers build challenge sets for individual titles — clear a stage without taking damage, beat a boss with the starting weapon — and a supported emulator watches the game’s memory as you play, reporting each unlock to your profile on retroachievements.org. The catalogue spans dozens of systems, from the NES up through PlayStation 2, GameCube and Wii.
As an Amazon Associate, we earn from qualifying purchases.
None of it works until three things line up: an account, a supported emulator or core, and a game file that matches a published set. This guide walks through each in order, explains the Hardcore-versus-Softcore decision behind every session, and notes where the standalone emulators differ. Everything here assumes games you dumped from your own discs and cartridges.
This article contains affiliate links; if you buy through them, we may earn a commission at no extra cost to you.
Quick Answer
RetroAchievements adds community-made achievement sets to classic games, tracked on a free profile. Create an account on retroachievements.org, enter your username and password under Settings, Achievements in RetroArch, then launch a game whose set exists. Hardcore mode earns double points but blocks save-state loading, rewind and cheats; Softcore keeps those conveniences.
What the Service Actually Tracks
Every set is written by community developers for one specific game, so coverage is uneven: a famous platformer may carry a large set while an obscure RPG has none. When you load a game, the emulator hashes your file and compares it against the hashes the set supports. A match loads the achievement list; no match means nothing unlocks, though the game plays normally.
Scoring follows the mode. A Softcore unlock is recorded as Softcore only; a Hardcore unlock counts for both, which is why it is worth double points. Finishing a whole set under Hardcore rules earns the game’s Mastered badge on your profile.
The One Decision That Matters: Hardcore vs Softcore
Hardcore mode exists to make unlocks mean something, so it strips away every emulator convenience that could manufacture one. Under the project’s published Hardcore rules:
- Loading save states is always blocked. You may still create a state in Hardcore, for practising in Softcore afterwards, but it cannot be loaded while Hardcore is on. Loading one drops that session to Softcore.
- Rewind is disabled, and so are slowdown and frame advance.
- Cheats are disabled, including cheat engines, GameShark and Game Genie devices, and external cheat files. The documented exception is minor quality-of-life patches such as widescreen hacks.
- Memory editors, debuggers and recorded-input tools are prohibited outright.
- Switching up mid-session is not allowed. Going from Hardcore down to Softcore is fine at any time; switching up forces a full reset of the game.
One point surprises people: the game’s own saving is untouched. Battery and memory-card saves work as they did on the original hardware in both modes — Hardcore governs the emulator’s tricks, not the game’s design, which is why long RPGs remain finishable. Learn a game in Softcore, then commit to Hardcore once you know it, per game rather than as a blanket setting.
Step by Step: Account and RetroArch Setup
- Create the account. Sign up free at retroachievements.org and note your exact username; every emulator will ask for it.
- Open the right menu. In RetroArch, go to Settings, then Achievements. Turn the Achievements toggle on.
- Sign in. Enter your username and password in that same menu. The emulator exchanges your password for a connect token and stores the token, not the password. Treat that token, and the Web API key shown in your account settings, as credentials equal to your password: never paste either into a forum post or screenshot, and reset them from your account settings if one leaks.
- Pick your mode. The Hardcore Mode toggle is in the same menu and applies from the next game launch.
- Save the configuration. From the main menu, choose Configuration File, then Save Current Configuration, so the sign-in survives a restart.
- Confirm it works. Load a game on a supported core and open the in-game menu’s Achievements entry: the set list should appear, and unlocks pop as notifications.
Check the Set Before You Play
Before investing hours in a long game, search for its title on retroachievements.org. A game page lists the full set when one exists, plus the versions it supports. If there is no set, no emulator setting changes that — the game has not been covered yet.
The common failure is subtler: the site lists a set, but RetroArch reports no achievements for your copy. That is almost always a hash mismatch — sets are built against specific releases, so a different region, revision or format can hash differently from every supported version. Re-dump from your own disc or cartridge in a supported format before assuming the emulator is broken.
What an Unsupported Core Means
Support is decided per core, not per system. The achievement engine needs the core to expose the console’s memory in a readable way; a core that cannot is unsupported, and no setting will make its games track. The project’s official Emulator Support page names a most-recommended core for most systems: FCEUmm for NES, Snes9x for SNES, Gambatte for Game Boy and Game Boy Color, mGBA for Game Boy Advance, Genesis Plus GX for Genesis and Master System, Mupen64Plus-Next for Nintendo 64, Beetle PSX HW for PlayStation, Beetle Saturn for Saturn and the Flycast core for Dreamcast.
Even listed cores carry notes — the documentation flags problem cases such as the 32X library on PicoDrive and points players to BizHawk instead — so check that page before giving up on a listed core. Two families never appear as cores at all: GameCube and Wii sets run only in the standalone Dolphin, covered below.
Per-Emulator Notes Beyond RetroArch
RetroArch is the broadest route: libretro cores also run in the other hardcore-compliant frontends the project lists — RALibRetro, Firelight, and the iOS apps Delta and Manic EMU — while BizHawk uses its own core family. The major standalone integrations are:
- DuckStation (PlayStation). Enable achievements in its settings and sign in with the same account. The documentation warns its save states can cause memory problems in casual play, so lean on memory-card saves for long games.
- PCSX2 (PlayStation 2). Supported in current stable builds; sign in under its Achievements settings. Keep PCSX2 updated, because older builds were restricted to casual mode.
- PPSSPP (PlayStation Portable). The standalone is supported alongside its libretro core, and is the route most PSP players use.
- Dolphin (GameCube and Wii). Standalone only, with minimum versions that matter: GameCube needs version 2407-68 or newer, Wii needs 2603a or newer. In both cases, Enable Dual Core must be switched off — the documentation lists it as unsupported.
- Flycast (Dreamcast). The standalone also covers the NAOMI and Atomiswave arcade boards, beyond the core’s Dreamcast library.
- melonDS (Nintendo DS). Playable through its libretro core in RetroArch, with a supported standalone build on Android.
Handheld Play: Same Build, Smaller Screen
There is no separate handheld version of any of this. A Windows handheld runs the same RetroArch build as a desktop PC, with the same menus and the same sign-in, so a library set up on your PC behaves identically. Unlocks post to the one profile whichever machine earned them; the device just needs an internet connection to sign in and report. The hardware below pairs well with the habit.
Lenovo Legion Go 2
The big-screen option: its 8.8-inch OLED renders the pillarbox bars around 4:3 games as true black, and the Zen 5 chip has headroom for every supported standalone emulator, PCSX2 and Dolphin included.
- Processor: AMD Ryzen Z2 Extreme, 8 cores and 16 threads, up to 5.1 GHz
- Memory: 32GB LPDDR5X, soldered
- Storage: 2TB SSD, plus a microSD slot
- Display: 8.8-inch OLED, 1920×1200, 144Hz
- Battery: 74Wh
See it on Amazon: https://www.amazon.com/dp/B0FYR2V7ZB?tag=gamingpcrev04-20
Lenovo Legion Go S
The lighter Windows handheld: its Z2 Go chip is comfortably matched to the RetroArch catalogue and the PlayStation and PSP standalones, while PlayStation 2 and GameCube sets are per-game propositions.
- Processor: AMD Ryzen Z2 Go, 4 cores and 8 threads, up to 4.3 GHz
- Memory: 16GB LPDDR5x-6400
- Storage: 512GB SSD, plus a microSD slot
- Display: 8-inch IPS, 1920×1200, 48 to 120Hz variable refresh
- Battery: 55.5Wh
See it on Amazon: https://www.amazon.com/dp/B0DTBN55K9?tag=gamingpcrev04-20
ASUS ROG Xbox Ally
The compact option: a 7-inch 1080p screen that suits the low native resolutions of achievement-era consoles. The base Z2 A chip covers the RetroArch systems and lighter standalones well; demanding PlayStation 2 sets work it hardest.
- Processor: AMD Ryzen Z2 A, 4 cores and 8 threads
- Memory: 16GB
- Storage: 512GB SSD, plus a UHS-II microSD slot
- Display: 7-inch IPS, 1920×1080, 120Hz
- Battery: 60Wh
- System: Windows 11 with the Xbox full screen experience
See it on Amazon: https://www.amazon.com/dp/B0FM6C3ZMN?tag=gamingpcrev04-20
8BitDo Pro 2 Bluetooth Controller
A symmetrical-stick pad suits the NES-to-PlayStation layouts most sets were designed around, and it runs wired over USB-C when you want a cable for a Hardcore attempt.
- Connection: Bluetooth, or wired over USB-C
- Sticks: Hall effect analogue sticks
- Compatibility: Windows PCs and handhelds
- Model number: not stated
See it on Amazon: https://www.amazon.com/dp/
SanDisk 1TB Extreme microSDXC
Achievement-era games are small, but a disc-based library adds up, and every handheld above takes a microSD card. One card holds the library, the emulators and the saves, and moves between devices.
- Capacity: 1TB
- Format: microSDXC, UHS-I
- Model: SDSQXAV-1T00-GN6MA
See it on Amazon: https://www.amazon.com/dp/B09X7MPX8L?tag=gamingpcrev04-20
How to Choose
Choose the emulator route before the hardware. RetroArch covers the widest span of systems with one sign-in, while PlayStation 2, GameCube, Wii and PSP players should go straight to the standalones. Next, verify the two things that decide whether anything unlocks: a set exists for your game, and your dump’s hash matches a supported version. Decide Hardcore per game — on for titles you know, off while learning — and pick a Windows handheld on screen and comfort, since the software is identical across them.
Who Should Skip
Skip it if your play style depends on the conveniences Hardcore forbids and Softcore’s lesser credit does not tempt you, or if you play entirely offline, since sign-in and reporting need a connection. Players whose libraries live on uncovered systems — Nintendo 3DS, Wii U, Switch and Xbox among them — will find nothing here. And if checking hashes sounds like homework rather than fun, plain emulation without the achievement layer is the better evening.
FAQ
Is RetroAchievements free?
Yes. The account, the sets and the tracking are all free, and the supported emulators are free software. The only requirement is an internet connection when you sign in and earn.
Why does my game show no achievements?
Three causes cover nearly every case: no set exists yet, your file’s hash matches no supported version — a different region or revision is typical — or the core is unsupported. Check the game’s page, then the official Emulator Support page for the recommended core.
Can I use save states in Hardcore mode?
You can create them, but you cannot load them while Hardcore is on; loading a state drops that session to Softcore. The game’s own battery or memory-card saves are unrestricted in both modes.
Do unlocks sync between my PC and my handheld?
Yes. Both devices sign in to the same account, and unlocks land on your single profile. Earn on whichever machine you are holding; the record follows you.
Final Verdict
RetroAchievements gives a finished classic a second life of targeted challenges, and Hardcore mode restores the discipline the original hardware imposed. The setup takes minutes — a free account, one sign-in inside RetroArch, a supported core — provided you respect the two gotchas: check a set exists, and make sure your own dump matches it. Start Softcore, graduate to Hardcore on the games you love, and let the Mastered badges accumulate.










