✅ Updated Nov 2026
Affiliate Disclosure: As an Amazon Associate, we earn from qualifying purchases. Links marked "Check on Amazon" are affiliate links — learn more.
⭐ Key Takeaways
Quick answer: Our top pick is SanDisk 1TB Ultra microSDXC Card, with Samsung T7 Portable SSD 1TB as a strong alternative.

RetroArch on the ROG Ally is the desktop Windows experience in a handheld shell, and that is mostly good news. There is no separate handheld build to hunt down: the standard Windows version installs on the Ally and Ally X exactly as on a gaming PC, and the Ryzen Z1 Extreme inside has more headroom than RetroArch’s classic-system cores know what to do with. The friction is Windows itself, plus one Armoury Crate setting that quietly decides whether your gamepad exists.

As an Amazon Associate, we earn from qualifying purchases.

This guide covers the route that works on a handheld Windows machine: which install to pick, the folders to set before your first game, the cores worth downloading, where your own BIOS dumps belong, how playlist scanning organises a library, and the display settings that suit a 7-inch 1080p 120Hz screen.

Some links in this guide are affiliate links, which means the site may earn a small commission if you buy through them, at no extra cost to you.

Quick Answer

Install the standalone Windows build of RetroArch from retroarch.com, not the Steam version, so the in-app Core Downloader works. Set Armoury Crate to Gamepad mode, point the system, save and file browser folders at your library, download cores through the Online Updater, place BIOS files dumped from your own consoles in the system folder, then scan your folders into playlists.

Step One: Pick Your Install Route

Libretro publishes RetroArch for Windows in two standalone forms: a self-extracting installer and a plain archive you unzip yourself. Both give you the same program. The installer is the simpler path, and Libretro’s documentation recommends the default location it offers. If you choose the archive, extract it somewhere Windows does not protect, such as your user folder. Libretro explicitly warns against Program Files and the Windows folder, because RetroArch constantly writes settings, saves and downloaded cores into its own directory, and protected folders break that.

The Steam version is the one to avoid for this job. On Steam, cores are distributed as separate downloadable content items rather than through RetroArch’s own Core Downloader, which makes the core library smaller and updates clunkier. The standalone build keeps everything inside one app: one updater, one cores folder, one place to back up.

The hardware underneath is generous. ASUS rates the Z1 Extreme at eight Zen 4 cores and sixteen threads boosting to 5.10 GHz, with RDNA 3 graphics of 12 compute units, 16GB of LPDDR5-6400 in the original Ally and 24GB of LPDDR5X-7500 in the Ally X. Every 2D core and most 3D cores run at full speed here; the settings below are about tidiness and picture quality, not survival.

Step Two: Set the Folders Before Anything Else

RetroArch scatters files if you let it. Before downloading a single core, open Settings, then Directory, and confirm four paths, the same four Libretro’s Windows guide tells every user to set: the System directory, which holds BIOS files; the Savefile directory; the Savestate directory; and the File Browser directory, where Load Content starts browsing.

A clean layout is a single RetroArch folder on the internal SSD with saves and states kept inside it, and your game library in one clearly named folder tree, on the SSD or on a microSD card in the UHS-II slot. Keeping saves inside the RetroArch folder means one copy of one folder backs up the whole setup. Do this first and every later step lands in the right place automatically.

Step Three: Download Cores for the Z1 Extreme

Cores arrive from inside the app. Go to Main Menu, Online Updater, and run Update Core Info Files and Update Databases first; the info files tell RetroArch what each core does and which firmware it expects. Then open the Core Downloader and fetch a sensible starting set for this hardware:

  • NES and SNES: Mesen or Snes9x.
  • Game Boy Advance: mGBA, which also handles Game Boy and Game Boy Color.
  • Genesis and Sega CD: Genesis Plus GX, the long-standing default.
  • PlayStation: Beetle PSX for accuracy, or SwanStation for its enhancement options.
  • PSP and Dreamcast: the PPSSPP and Flycast cores both run well on the Z1 Extreme.

Two honest notes. The Dolphin core inside RetroArch trails the standalone Dolphin app, so GameCube and Wii are better served by the standalone program; the same goes for PCSX2 for PlayStation 2. RetroArch’s strength on the Ally is everything from the cartridge era through the first 3D generation in one menu, not replacing the big standalone emulators.

Step Four: BIOS Files From Your Own Consoles

Some cores need a BIOS file, a dump of the console’s built-in software, and RetroArch ships with none. Yours must come from hardware you own. The files go in the System directory you confirmed in step two, and each core’s page in Libretro’s documentation lists the exact filenames it looks for; a misnamed file is simply ignored, the most common reason a core reports missing firmware.

To check your work, load a core without a game and open Information, then Core Information. RetroArch lists the firmware the core wants and whether each file was found. Fix names and folders until that screen is clean before blaming the core for a black screen.

Step Five: Scan Your Library Into Playlists

With cores installed, open Import Content and choose Scan Directory, then point it at the folder holding your game dumps. RetroArch compares files against its databases and builds one playlist per system it recognises. Large collections take a few minutes; box art is optional and arrives separately through the Playlist Thumbnails Updater.

The automatic scan only adds games that match the database, so a homebrew file or unusual dump may be skipped. The Manual Scan option adds a folder’s contents without the database check, at the cost of plainer names. Either way, RetroArch never moves your files.

The Ally’s Controls: Gamepad Mode and Autoconfig

The single most important Ally setting sits outside RetroArch. Armoury Crate SE can present the built-in controls as a gamepad or as a desktop mouse-and-keyboard scheme, and in the desktop scheme your sticks and buttons drive a cursor instead of the game. Set the control mode to Gamepad, and RetroArch sees a standard XInput controller.

From there, autoconfig does the work. RetroArch ships autoconfig profiles for common controllers and shows an on-screen message when a pad is recognised. The built-in Ally controls in Gamepad mode are recognised as an Xbox-style pad, so the D-pad navigates menus and the default menu toggle combination opens the Quick Menu mid-game. A docked external controller is picked up the same way, and per-controller bindings can be saved from Settings, Input if a layout needs correcting.

Display Settings for a 1080p 120Hz Panel

The Ally’s screen is a 7-inch 1920 x 1080 IPS panel at 120Hz with FreeSync Premium, per ASUS’s specification. Three settings suit it. First, use the Vulkan video driver, which RDNA 3 graphics handle well and which the modern slang shader format requires. Second, leave refresh handling at the panel’s 120Hz: classic consoles output near 60Hz, and RetroArch syncs to the core’s timing rather than forcing the panel rate, so motion stays correct while the high-refresh panel keeps menus fluid. Third, consider integer scaling for 2D systems if you like exact pixel multiples, accepting the small black borders at 1080p.

For the CRT look, load shader presets from the Quick Menu’s Shaders section. At 1080p on a 7-inch screen, a light slang preset with scanlines and a mild mask reads convincingly and costs the Z1 Extreme little. Heavy multi-pass presets are affordable too, but on a small panel the difference between light and heavy chains is far smaller than on a television.

Per-Core Overrides: Set It Once Per System

Not every system wants the same shader, scaling or controller layout. RetroArch’s override system solves this: with a core running, change what you want, then save a Core Override from the Quick Menu’s Overrides section, and those settings apply only when that core runs. Overrides are how you keep a handheld-style shader on Game Boy cores and integer scaling on SNES without touching the global configuration again.

Storage and Accessories That Round Out the Setup

SanDisk 1TB Ultra microSDXC Card

SanDisk 1TB Ultra microSDXC Card

SanDisk 1TB Ultra microSDXC Card

Check price on Amazon

The Ally’s microSD slot is the simplest way to carry a full retro library without touching the internal SSD.

Specs:
– Capacity: 1TB
– Format: microSDXC, UHS-I
– Model: SDSQUAC-1T00-GN6MA
– Read speed: not stated

See the SanDisk 1TB Ultra on Amazon

Samsung T7 Portable SSD 1TB

Samsung T7 Portable SSD 1TB

Samsung T7 Portable SSD 1TB

Check price on Amazon

A portable SSD turns the whole RetroArch folder, library included, into something movable between the Ally and a desktop PC.

Specs:
– Model: MU-PC1T0T/AM
– Capacity: 1TB
– Interface: USB 3.2 Gen 2
– Speeds: up to 1,050 MB/s read, 1,000 MB/s write
– Security: AES 256-bit hardware encryption

See the Samsung T7 on Amazon

JSAUX 6-in-1 Docking Station HB0609

JSAUX 6-in-1 Docking Station HB0609

JSAUX 6-in-1 Docking Station HB0609

Check price on Amazon

A dock makes the Ally a small living-room console, with wired networking for library transfers and a big screen for multiplayer.

Specs:
– Model: HB0609
– Video: HDMI output
– Network: Gigabit Ethernet
– Charging: USB-C pass-through charging
– Ports: six-in-one hub layout

See the JSAUX HB0609 on Amazon

tomtoc Arccos G47 Carrying Case

A fitted hard case protects the sticks and screen a handheld exposes in a bag.

Specs:
– Model: Arccos G47
– Fit: designed for ROG Ally and Ally X
– Style: hard-shell carrying case
– Extra storage: not stated

See the tomtoc Arccos G47 on Amazon

Xbox Wireless Controller Carbon Black

Xbox Wireless Controller Carbon Black

Xbox Wireless Controller Carbon Black

Check price on Amazon

An external pad is the comfortable option for docked play and for games where the Ally’s built-in sticks feel small.

Specs:
– Model: Xbox Wireless Controller, Carbon Black
– Connection: Bluetooth and USB-C
– Compatibility: Xbox Series X|S, Xbox One, Windows
– Extras: dedicated Share button, hybrid D-pad

See the Xbox Wireless Controller on Amazon

How to Choose

Start with the standalone installer build, because the Core Downloader makes RetroArch self-maintaining. Choose cores by system, one good core each, rather than downloading the whole catalogue. Decide where the library lives before scanning: internal SSD for the systems you play most, microSD for bulk storage. Finally, save overrides per core as you settle each system’s look.

Who Should Skip

Skip RetroArch as your only emulator if your library is mostly GameCube, Wii or PlayStation 2; the standalone Dolphin and PCSX2 apps serve those systems better. Skip the Steam build entirely for this purpose. And skip the whole project if you prefer a curated, console-style frontend with no visible settings: RetroArch rewards an hour of configuration, and readers who hate menus will feel every minute of it.

FAQ

Does RetroArch on the Ally need Armoury Crate running?

Only for the control mode and performance profile settings. RetroArch itself is an ordinary Windows program; Armoury Crate’s Gamepad mode is what makes the built-in controls present as a controller, so set that once and RetroArch behaves.

Can RetroArch and the standalone emulators share one library?

Yes. Playlists and standalone emulators both just read game files from folders. Keep one library tree, point every emulator at it, and keep each program’s saves separate so nothing overwrites anything.

Why did my scanned game not appear in a playlist?

The standard scan matches files against RetroArch’s database by checksum, and unmatched files are skipped silently. Update the databases in the Online Updater and rescan, or use Manual Scan to add the folder without database matching.

Should I use the 30W Turbo profile for RetroArch?

For the cartridge-era and early 3D cores in this guide, the lower performance profiles already reach full speed, and quieter modes extend battery life. Reserve Turbo for the heaviest standalone emulators.

Final Verdict

RetroArch on the ROG Ally is a one-afternoon setup with a long payoff: the standalone Windows build, four folders set deliberately, a short list of proven cores, your own BIOS dumps in the system folder, and Gamepad mode switched on in Armoury Crate. Do those things in that order and the Ally becomes a tidy all-in-one retro handheld whose library, saves and settings live in one folder you can back up whole.

Explore Our Guides & Free Tools