A black screen on a PC is one of the most unsettling problems a gamer can face. The fans spin, the lights come on, and the keyboard glows, yet the monitor shows nothing at all.
The fix is almost always a process of elimination. A black screen has a short list of usual causes: a loose or faulty cable, a monitor set to the wrong input, a graphics card that is not seated or not powered, a bad driver, a memory stick that is not seated, or a power supply that cannot hold the load. Work through the checks below in order.
As an Amazon Associate, we earn from qualifying purchases.
Quick Answer
Check the monitor power and input first, then reseat the display cable at both ends and try a different cable and port. If the screen is still blank, reseat the graphics card and memory, and try the motherboard video output to rule out the graphics card. If you reach Windows, boot into Safe Mode and reinstall the graphics driver.
Table of Contents
- Quick Answer
- Before You Start: What to Check First
- How to Fix a Black Screen on a PC
- Related Products That Help With a Black Screen
- How to Choose
- Who Should Skip
- Frequently Asked Questions
- Final Verdict
- Product and ASIN Reference
Before You Start: What to Check First
Before you open the case, answer three questions. First, does the monitor show anything at all when the PC is off, such as a brand logo or a “no signal” message? A monitor that shows its own message is powered and working, so the fault is in the PC or the cable. A monitor that shows nothing may have no power at all, so check its power cable and wall outlet first.
Second, does the PC itself show signs of life? If pressing Caps Lock toggles its light, Windows is likely loaded behind the blank screen, which points toward the display path. If nothing responds, the power supply and memory checks matter more.
Third, what changed most recently? A black screen that started right after a driver update, a Windows update, a new graphics card, or moving the PC points at the thing that changed. One that appeared out of nowhere points more often at a cable or a connection that worked loose.
How to Fix a Black Screen on a PC
Work through these steps in order; the most common cause is also the simplest one.
Step 1: Check the Monitor Power and Input
Confirm the monitor power light is on, then press the menu button and select the port your cable uses, such as HDMI 1 or DisplayPort. Cycle through the inputs and wait a few seconds on each.
Step 2: Reseat the Cable and Try a Different Port
Unplug the display cable at both ends, then plug it back in firmly until each connector sits flush. A cable can look connected yet sit loose enough to lose the signal. If a spare cable brings the picture back, the old cable was the problem. Also try a different output on the graphics card, since one port can fail while the rest of the card works.
Step 3: Restart the Driver, Then Reinstall It in Safe Mode
If the PC seems to be running, press the Windows key, Ctrl, Shift, and B together to restart the graphics driver; the screen may flash and then come back. If the screen works in some situations but goes black when Windows loads, boot into Safe Mode, open Device Manager, uninstall the display adapter driver, restart, and install a fresh driver from the graphics card maker’s own site.
Step 4: Try the Motherboard Video Output
If your processor has integrated graphics, plug the monitor into the motherboard video output instead of the graphics card. If the picture appears, the graphics card, its slot, or its power connection is the problem, and the rest of the PC is fine. If it still does not appear, the fault lies elsewhere.
Step 5: Reseat the Graphics Card and Check Its Power
Shut the PC down, switch off the power supply, and unplug the cord. Open the case, release the retention clip, remove the card, and push it firmly back in until the clip clicks. Check that every power connector is fully seated; a partly connected card can spin its fans yet output no picture.
Step 6: Reseat the Memory
With the power off and the cord unplugged, remove each stick and push it back in until both clips snap shut. If the PC has two sticks, try booting with one stick at a time in the first slot the manual marks. If the PC boots with one stick and not the other, you have found the faulty stick.
Step 7: Test With a Second Display and Check the Power Supply
Connect the PC to a different monitor or a TV. If the picture appears on the second display, your monitor has failed. If it does not appear on any display, the fault is inside the PC, and the most likely parts left are the graphics card and the power supply. A weak power supply can leave the fans spinning while the card never gets the stable power it needs, so testing with a known-good unit is the fastest way to confirm it.
Related Products That Help With a Black Screen
These four products cover the parts most often involved in a black screen.
Cable Matters Braided 8K HDMI 2.1 Cable, 3.3 Feet
A faulty cable is the most common cause of a black screen, and a certified cable removes that doubt. This Cable Matters braided cable is Ultra High Speed HDMI certified, rated for 48 Gbps, and supports 8K at 60 Hz and 4K at 240 Hz with HDR. Match the listing by model 300032-BLK-1m and the ASIN below. The 3-pack version is a separate listing.
Key specs:
| Spec | Detail |
|---|---|
| Interface | HDMI 2.1, Ultra High Speed certified |
| Bandwidth | 48 Gbps |
| Length | 3.3 feet |
| Jacket | Braided |
| ASIN | B07FDKN9BV |
LG UltraGear 27GS75Q-B 27-Inch QHD Gaming Monitor
If the monitor itself is the fault, this LG UltraGear is a solid replacement that also works well as a test display. It uses a 27-inch IPS panel at 2560 by 1440 resolution with a 180 Hz refresh rate overclocked to 200 Hz, a 1 ms response time, NVIDIA G-SYNC compatibility, AMD FreeSync, and HDR10. Match the listing by model 27GS75Q-B.AUS and the ASIN below. The older 27GR75Q-B is a different model with a lower refresh rate.
Key specs:
| Spec | Detail |
|---|---|
| Panel | 27-inch IPS, 2560 by 1440 |
| Refresh rate | 180 Hz, overclockable to 200 Hz |
| Response time | 1 ms |
| Sync | G-SYNC Compatible, AMD FreeSync |
| ASIN | B0DFZZHK6X |
XFX Swift AMD Radeon RX 9060 XT OC Triple Fan Gaming Edition, 16GB
If testing points at a dead graphics card, this XFX Swift RX 9060 XT is a current-generation replacement. It carries 16GB of GDDR6 memory on AMD RDNA 4 architecture, with a boost clock up to 3320 MHz and a triple-fan cooler. Match the listing by model RX-96TS316BA and the ASIN below. The dual-fan version and the 8GB version are separate listings.
Key specs:
| Spec | Detail |
|---|---|
| GPU | AMD Radeon RX 9060 XT, RDNA 4 |
| Memory | 16GB GDDR6 |
| Boost clock | Up to 3320 MHz |
| Outputs | 1 HDMI, 2 DisplayPort |
| ASIN | B0F8128Y33 |
Corsair RM850e (2025) Fully Modular 850W Power Supply
A failing power supply can leave a PC with spinning fans and a black screen, because the graphics card never gets the stable power it needs. This Corsair RM850e (2025) is a fully modular 850-watt unit, certified to the ATX 3.1 standard and PCIe 5.1, with a native 12V-2×6 cable for modern graphics cards and Cybenetics Gold efficiency. Match the listing by model CP-9020296-NA and the ASIN below. A second listing with model CP-9020296-NA/AM circulates for the same unit, so match the model number and the ASIN together.
Key specs:
| Spec | Detail |
|---|---|
| Wattage | 850 watts |
| Standard | ATX 3.1, PCIe 5.1 |
| Modularity | Fully modular |
| GPU cable | Native 12V-2×6 included |
| ASIN | B0DPR86ZC8 |
How to Choose
Choose by the step that failed. If a spare cable fixes the picture, buy a certified cable and stop there. If the motherboard output works but the graphics card output does not, the card is the suspect, and reseating it costs nothing before you consider replacing it. If the PC only fails under load, such as when a game starts, the power supply is the more likely fault than the monitor.
Who Should Skip
Skip the hardware replacements if the black screen only appears in one game or one app, because that points at the software rather than the hardware. Skip opening the case if the PC is still under warranty and the maker offers a repair, because opening it can complicate a warranty claim. Skip buying a new graphics card until you have tested the motherboard video output, because a dead card and a dead cable look identical from the outside.
Frequently Asked Questions
How do I fix a black screen on a PC?
Start with the monitor power and input, then reseat the cable and try a different cable and port. If the screen stays black, reseat the graphics card and the memory, and try the motherboard video output to rule out the graphics card. If Windows loads behind the blank screen, boot into Safe Mode and reinstall the graphics driver.
Why is my PC screen black but the PC is on?
The most common reason is a display problem rather than a dead PC. The cable may be loose, the monitor may be on the wrong input, or one output port may have failed. If pressing Caps Lock toggles its light, Windows is running and the fault is in the display path.
How do I fix a black screen after a Windows update?
Boot into Safe Mode, which loads Windows with a basic display driver. Open Device Manager, uninstall the display adapter driver, and restart the PC, then install a fresh driver from the graphics card maker’s own site. Windows Update can replace a working driver with a faulty one, and a clean reinstall is the usual fix.
Can a bad power supply cause a black screen?
Yes. A power supply that cannot hold its output under load can leave the fans spinning while the graphics card never gets the stable power it needs to produce a picture. This shows up most often when a game or a demanding app starts, or right after a new graphics card is installed.
Final Verdict
A black screen is rarely a mystery once you work through the list. Check the monitor and the cable first, because those two steps fix most cases in minutes. Reseat the graphics card and the memory next, and use the motherboard video output and Safe Mode to separate a hardware fault from a driver fault.






