As an Amazon Associate we earn from qualifying purchases.
A drawing tablet setup is only as steady as the screen that sits beside it. A pen display needs to stay at a comfortable height and angle for long sessions, while a second monitor needs to stay out of the way of the tablet, keyboard and reference material. A monitor arm can solve both problems at once, provided the arm matches the weight, size and mounting pattern of the screen it will hold.
This guide looks at monitor arms that suit drawing tablet work. It explains what to check before buying, then compares four arms that are listed on Amazon US. The focus is on VESA compatibility, weight range, reach, desk mounting and adjustment, because those factors decide whether an arm will hold a pen display steady or slowly drift out of position.
What to Check Before You Choose
Start with the screen, not the arm. Check whether the monitor or pen display has a VESA mounting pattern on the back, and note the exact pattern, usually 75 by 75 mm or 100 by 100 mm. Some pen displays ship without a VESA mount, or need an adapter sold separately. Confirm that detail on the display listing before ordering an arm.
Weight matters more than screen size. A 27 inch monitor can weigh far less than a 24 inch pen display, and a gas spring arm has a minimum as well as a maximum weight. A screen below the minimum can drift upward, while a screen above the maximum can sink. Weigh the display with its stand removed if possible, and choose an arm whose stated range includes that figure with room to spare.
Desk fit is the next check. Most arms in this guide use a C-clamp or a grommet mount. Measure desk thickness and check for a rear lip, a cable tray or a glass top that could block a clamp. A grommet mount needs a suitable hole in the desk surface. If the desk is thin, hollow or unusually thick, confirm the clamp range in the listing before buying.
Reach and height range decide how the screen can sit beside a tablet. A drawing setup often places the pen display low and close, with a reference monitor higher and further back. Look for tilt, swivel, rotation and lift figures in the listing. Rotation to portrait mode can help with reference images, comic pages and vertical canvases.
Cable routing also matters. A pen display usually connects with USB-C, HDMI and a power cable. An arm with cable clips or a channel keeps those cables clear of the tablet surface and reduces snagging when the arm moves.
1. Ergotron LX Desk Monitor Arm
The Ergotron LX is a single monitor desk mount for flat, curved and ultrawide monitors up to 34 inches and 7 to 25 lbs, with VESA 75 by 75 mm or 100 by 100 mm mounting. The model number is 45-241-026. It offers 13 inches of lift and 25.6 inches of extension, with 360 degree rotation and 75 degree tilt listed in the Amazon product details.
That weight range suits heavier pen displays and larger reference monitors. The Constant Force design is intended to hold the screen in place once adjusted, which helps when a pen display is tilted for drawing and then raised for viewing. The arm includes a desk clamp and a grommet mount, so it fits a range of desks, subject to the thickness limits in the listing.
- View on Amazon: https://www.amazon.com/dp/B00358RIRC
2. HUANUO Single Monitor Mount, Gas Spring, 13 to 32 Inch
The HUANUO single monitor mount fits 13 to 32 inch monitors, holds 4.4 to 19.8 lbs, and supports VESA 75 by 75 mm and 100 by 100 mm patterns. It uses a gas spring arm with a C-clamp and grommet base, and lists tilt from minus 50 degrees to plus 30 degrees, swivel of plus or minus 90 degrees, and 360 degree rotation.
The lower minimum weight makes this arm a better fit for lighter monitors and smaller pen displays than the Ergotron LX. The gas spring is intended for one-hand adjustment, which suits artists who move a reference monitor between tasks. The listing states the arm has passed 20,000 motion tests, a durability claim from the manufacturer.
- View on Amazon: https://www.amazon.com/dp/B0CTJYYSML
3. HUANUO Single Monitor Arm, Tall Pole, 13 to 32 Inch
The tall HUANUO single monitor arm fits 13 to 32 inch screens, holds 4.4 to 19.8 lbs, and supports VESA 75 by 75 mm or 100 by 100 mm mounting. It uses a taller pole than the standard HUANUO arm, and the listing states it can raise a monitor up to 20.87 inches above the desktop. Tilt is listed as plus 90 degrees to minus 35 degrees, with 180 degree swivel and 360 degree rotation.
The extra height suits a reference monitor placed above a pen display, or a setup where the artist works standing for part of the day. The taller pole also helps when the desk surface is crowded with a tablet, keyboard and drawing materials, because the monitor can sit higher and further back.
- View on Amazon: https://www.amazon.com/dp/B0CJJQ6CL2
4. VIVO STAND-V001Q Gas Spring Monitor Arm
The VIVO STAND-V001Q is a premium aluminium single monitor arm with a gas spring, for screens up to 32 inches and 2.2 to 20 lbs. It supports VESA 75 by 75 mm and 100 by 100 mm patterns, with height adjustment from 6.5 to 20 inches and maximum extension of 23.5 inches listed on the VIVO product page. The clamp fits desktop thicknesses from 0.5 to 3 inches, and a grommet option is also listed. VIVO lists a three-year warranty for this model.
The low minimum weight of 2.2 lbs makes this arm suitable for very light monitors, which is useful when the reference screen is a small, light panel. The gas spring allows smooth height adjustment, and the aluminium construction keeps the arm compact on the desk.
- View on Amazon: https://www.amazon.com/dp/B01LYVCEIB
Comparison at a Glance
| Arm | Screen size | Weight range | Mounting |
|---|---|---|---|
| Ergotron LX | Up to 34 inches | 7 to 25 lbs | VESA 75/100 mm, clamp and grommet |
| HUANUO Gas Spring | 13 to 32 inches | 4.4 to 19.8 lbs | VESA 75/100 mm, clamp and grommet |
| HUANUO Tall Pole | 13 to 32 inches | 4.4 to 19.8 lbs | VESA 75/100 mm, clamp and grommet |
| VIVO STAND-V001Q | Up to 32 inches | 2.2 to 20 lbs | VESA 75/100 mm, clamp and grommet |
Weight range is the deciding factor in this table. Screen size alone can mislead, because two screens of the same size can differ in weight by several pounds.
Conclusion
The best monitor arm for a drawing tablet setup is the one that matches the screen weight, VESA pattern and desk fit, not the one with the longest reach on paper. The Ergotron LX suits heavier screens up to 25 lbs, the HUANUO gas spring and tall pole arms suit mid-weight screens from 4.4 lbs, and the VIVO STAND-V001Q suits light screens from 2.2 lbs. Measure the display, measure the desk, and choose the arm whose stated range includes both figures. That check keeps the screen steady, frees desk space for the tablet, and makes long drawing sessions more comfortable.
For more context, see our guide to best gaming drawing tablet.










