A gaming desk hides a surprising amount of hardware underneath it. Between the PC power supply, two or three monitor bricks, a console charger, a USB hub, and the power strip tying it all together, the space below a battlestation quickly turns into a dangling nest of cords that collects dust and gets kicked when you shift in your chair. An under-desk cable tray fixes that by giving the strip and its bricks a fixed home, lifting everything off the floor and out of sight while still leaving it reachable when you need to swap a plug.
The five trays in this guide cover the main mounting styles and sizes you will find. Some clamp onto the desk edge in minutes with no tools beyond your hands, which suits renters and glass or metal desks. Others screw into the underside of the desktop for a more permanent hold. All five are open wire or mesh designs rather than closed boxes, because open trays let power bricks breathe and make it far easier to add or remove a cable mid-session.
As an Amazon Associate, we earn from qualifying purchases.
How to Choose the Right Desk Cable Tray
Measure for Your Power Strip First
The tray has to fit the strip before anything else matters. Measure the length of your power strip, then add room for the wall warts and bricks that plug into it, since a chunky laptop or monitor brick can hang well past the strip body. A tray in the 13 to 16 inch range suits a single compact strip on a small desk. Most gaming setups with a PC, two monitors, and a console are better served by a tray around 25 inches long, or by two shorter trays mounted side by side so the strip and the low-voltage chargers can live apart.
Width and depth matter too. A tray roughly 4.5 to 5 inches wide holds most strips flat, while extra depth gives tall bricks room to sit upright instead of forcing the strip to tilt. If your strip has side-facing outlets, leave extra depth so plugs do not press against the tray wall.
Clamp-On vs. Screw-Mount
Clamp-on trays grip the rear edge of the desktop with padded C-clamps. They install in minutes, move easily when you rearrange the room, and leave no holes, which makes them the default choice for standing desks and rented spaces. Screw-mount trays fasten directly to the underside of the desk. They sit flush anywhere along the back, not just at the edge, and generally feel more solid under a heavy load, but they need a wood or composite desktop thick enough to hold screws and they stay where you put them.
A few trays support both styles, shipping with clamps and screws. Whichever style you pick, check the rated load: a strip plus three bricks can weigh more than you expect, and ratings on these trays commonly run from about 10 to 15 pounds.
Check Your Desktop Thickness
Clamp trays only work if the clamp jaw opens wider than your desktop is thick. Most desk clamps handle tops from about 0.4 inch up to roughly 2 inches, but desktops with thick edge banding, beveled edges, or a rear crossbar can block the clamp entirely. Measure the exact spot where the tray will sit, including any frame rail under the back edge. Screw-mount trays avoid the edge problem but need enough solid material underneath; thin honeycomb desktops may not hold screws well, so confirm what your desk is made of before drilling.
Leave Airflow for Power Bricks
Power bricks and larger adapters get warm under load, and a tray that traps heat shortens their life. Open wire and mesh trays are the safer pattern for gaming setups because air moves freely around the strip. Avoid stacking bricks on top of each other, and keep at least a finger of space around the largest adapter. If a brick runs noticeably hot, give it the end position in the tray where air circulates best rather than burying it in the middle of the bundle.
Pair the Tray With Raceways and Sleeves
A tray handles the hardware, but the cables still have to travel from the tray up to your monitors, PC, and peripherals. Adhesive raceways along the back edge of the desk guide those runs neatly, and a braided sleeve bundles the drop from the tray to the floor into a single clean line. Hook-and-loop ties inside the tray keep excess cable coiled instead of spilling over the sides. Planning the tray, raceway, and sleeve as one system is what turns a tidy underside into a tidy whole desk.
QUELIEN Under Desk Cable Management Tray, 25.3 Inch
| Spec | Detail |
|---|---|
| Brand | QUELIEN |
| Length | 25.3 inches |
| Material | Carbon steel |
| Mounting | Clamp-mount, no drill |
| Color | White (other colors offered) |
| ASIN | B0F47ZLBBB |
The QUELIEN is the long option in this guide, and length is exactly what a full gaming setup needs. At just over 25 inches it swallows a full-size power strip plus the bricks for a PC, two monitors, and a console charger in one run, so you are not forced into a second tray. The carbon steel frame keeps that span rigid instead of sagging in the middle under a loaded strip.
Installation is clamp-on with no drilling, and the tray can face inward or outward depending on how much rear overhang your desk has. The open box profile gives bricks more vertical room than flat mesh trays, which helps when a tall adapter needs to stand upright. For a battlestation with a wide desk and a long strip, this is the most straightforward single-tray answer here.
Litwaro Under Desk Cable Management Tray, Metal Mesh
| Spec | Detail |
|---|---|
| Brand | Litwaro |
| Length | 13.38 inches |
| Material | Carbon steel mesh |
| Mounting | C-clamp, no drill |
| Load rating | About 15 lb per maker |
| ASIN | B0BZ3GHM8N |
The Litwaro mesh tray is the compact clamp-on pick for smaller desks or for one zone of a bigger setup. Its 13.38 inch basket fits a modest strip and a couple of chargers, and the carbon steel mesh keeps weight down while letting air move freely around warm adapters. Two pass-through holes on each side let cables exit exactly where they need to instead of draping over the rim.
The C-clamps include soft rubber pads to protect the desktop finish, and the tray mounts facing inward or outward. Litwaro rates the basket at about 15 pounds, which is generous for its size. If your gaming desk is a 48 inch model with a single monitor, or you want a second small tray dedicated to console and controller chargers, this size makes more sense than stretching one long tray across the whole desk.
Litwaro Under Desk Cable Management Tray, White 15.75 Inch
| Spec | Detail |
|---|---|
| Brand | Litwaro |
| Length | 15.75 inches |
| Material | Metal |
| Mounting | Clamp mount, no drill |
| Color | White |
| ASIN | B0C8B33DC2 |
This white Litwaro tray steps up to 15.75 inches, a middle size that suits the common one-PC, one-or-two-monitor desk where a 13 inch tray feels tight but a 25 inch tray would hang past the desk frame. The white finish pairs well with the white desk and white case builds that are popular in gaming rooms, where a black basket stands out against a white desk.
Like its smaller sibling, it clamps on without drilling, mounts inward or outward, and uses side openings to route cables out cleanly. The open metal design keeps power strips and USB hubs off the floor and away from your feet, and the mesh pattern sheds dust instead of collecting it the way a solid box does. Choose this one when the mid-size footprint and the color match matter as much as the cable control itself.
Orapoke Cable Management Under Desk Tray, 2 Pack
| Spec | Detail |
|---|---|
| Brand | Orapoke |
| Pack | 2 trays |
| Size (each) | 13.4 x 4.6 x 3.1 inches |
| Material | Metal, powder coated |
| Mounting | Clamp, no drill |
| Load rating | Up to 10 lb each per maker |
| ASIN | B0FN2ZV48C |
The Orapoke set takes a different approach: two smaller trays instead of one long one. Splitting the load lets you park the power strip and PC brick under one side of the desk and the chargers, hub, and console power supply under the other, which keeps high-draw hardware away from low-voltage gear and makes each bundle easier to trace when something needs unplugging.
Each tray is fully welded and powder coated metal, rated by the maker at up to 10 pounds, and the clamps carry anti-scratch pads so the finish on your desktop survives repositioning. The trays can face inward or outward to suit the desk frame. For dual-monitor and PC-plus-console setups, two targeted trays usually end up tidier than one long tray with everything piled in a row.
Baskiss Cable Management Trays, 2 Pack 16 Inch
| Spec | Detail |
|---|---|
| Brand | Baskiss |
| Pack | 2 trays |
| Length (each) | About 16 inches (40 cm) |
| Material | Steel |
| Mounting | Clamp-on or screw-mount |
| ASIN | B07Q5W52DT |
The Baskiss pair is the flexible-mount option. Each steel tray measures about 16 inches, and the set can clamp to the back edge of the desk with the included knobs for a no-drill install, or screw directly into the underside of a wood or composite desktop when you want a fixed position away from the edge. That dual approach suits gamers who rearrange often now but expect to settle into a permanent layout later.
The open wire basket design leaves strips and adapters visible enough to reach but hidden from normal view, and air flows freely around bricks. Two trays give you roughly 32 inches of total storage, enough to run a strip the length of most desks or to split power between the PC side and the monitor side. If you are unsure which mounting style your next desk will need, this set covers both.
Frequently Asked Questions
How long should a desk cable tray be for a gaming setup?
Match the tray to the strip, not the desk. A single PC and monitor usually fit a tray in the 13 to 16 inch range, while a dual-monitor battlestation with a console typically needs about 25 inches of tray or two shorter trays mounted side by side. Leave a little spare length so bricks are not wedged in tightly.
Will a clamp-on tray work on a standing desk?
Yes, clamp-on trays are a natural fit for standing desks because they move with the desktop and need no drilling. Just confirm the clamp fits your desktop thickness and that no rear frame rail blocks the mounting spot, and route the floor drop with enough slack for the desk at full height.
Can a cable tray hold heavy power bricks safely?
Within its rated load, yes. Ratings on the trays here run from about 10 to 15 pounds, and a strip with several bricks usually stays under that. Spread the heaviest brick near a clamp or screw point rather than at the center of a long span, and keep bricks separated so they do not trap heat against each other.
Should I choose a tray or a closed cable management box?
For gaming setups, an open tray is usually the better pick. Bricks and adapters run warm, and open wire or mesh trays let that heat escape while making it easy to add or remove a plug. Closed boxes hide cables more completely but trap warmth and are slower to open mid-session, so they suit living room TV stands better than battlestations.
Product and ASIN Reference
| Product | ASIN |
|---|---|
| QUELIEN Under Desk Cable Management Tray, 25.3 Inch | B0F47ZLBBB |
| Litwaro Under Desk Cable Management Tray, Metal Mesh | B0BZ3GHM8N |
| Litwaro Under Desk Cable Management Tray, White 15.75 Inch | B0C8B33DC2 |
| Orapoke Cable Management Under Desk Tray, 2 Pack | B0FN2ZV48C |
| Baskiss Cable Management Trays, 2 Pack 16 Inch | B07Q5W52DT |











