✅ Updated Nov 2026
Affiliate Disclosure: As an Amazon Associate, we earn from qualifying purchases. Links marked "Check on Amazon" are affiliate links — learn more.

Your router says gigabit, your switch says gigabit, and game downloads still crawl while someone else streams video in the next room. Aggregated link speed is the networking trick that fixes that bottleneck: it bonds two or more Ethernet links into one logical connection, so a NAS or a busy household can push more data at once. It will not double your internet plan, but in the right setup it removes the single-cable ceiling that caps wired transfers.

This guide explains what aggregated link speed means, how link aggregation works, and how to set it up for a gaming PC or a NAS. It also covers the honest limits: a single download or a single game still tops out at the speed of one link.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

Aggregated link speed is the combined throughput of two or more bonded Ethernet links. Two 1 gigabit links carry up to 2 gigabits of total traffic, and two 2.5 gigabit links carry up to 5 gigabits. A single download or game still uses one link, so the gain shows up when several devices or transfers run at once, and the bond keeps traffic moving if one cable fails.

Table of Contents

Aggregated link speed is the total capacity of a bonded group of Ethernet links: two 1 gigabit ports give up to 2 gigabits per second, and two 2.5 gigabit ports give up to 5 gigabits per second. The speed is the sum of the member links, not a faster single lane.

The gain is limited to combined traffic. A link aggregation group assigns each traffic flow to one member link, based on a hash of the packet addresses. One flow, such as a single game download, travels down one member link and never exceeds that link’s speed. Two or more flows spread across the member links, and that is when the total climbs toward the aggregated figure. A NAS serving two PCs at once gains from bonding; a single gaming PC does not.

Link aggregation is standardized as IEEE 802.3ad, now part of IEEE 802.1AX. The two common ways to build a group are LACP and static trunking. LACP lets the two ends negotiate the bond and check that the member links are healthy. Static trunking needs the same settings on both ends with no negotiation. LACP is the safer choice when both devices support it, because a mismatch in a static setup can cause loops or dropped traffic.

Both ends of the bond must support aggregation: a managed or smart-managed switch on one side, and a NAS with port trunking, a router with LAN or WAN aggregation, or a PC running Linux with the bonding driver on the other. An unmanaged switch cannot create a group, so check the specs before buying. Two cables are required, one per member link, between the same two devices. Desktop Windows has no built-in NIC teaming, so most home setups bond at the NAS or the router instead.

  1. Confirm both ends support it. Check the switch and the NAS, router, or server for link aggregation, LACP, port trunking, or bonding in the official specs.
  2. Run two cables between the same two devices. Use the same cable category for both links.
  3. Create the group on both ends. On the switch, select the two ports and add them to a link aggregation group, choosing LACP. On a NAS, enable port trunking on the same two ports; on a router, enable LAN or WAN aggregation; on Linux, load the bonding driver in 802.3ad mode.
  4. Test with parallel traffic. Copy two large files at once, or download on one PC while another streams. Total throughput should climb past a single link’s speed.
  5. Test failover. Unplug one cable and confirm traffic continues on the remaining link, then plug it back in. If traffic stops entirely, the mode or port selection is mismatched.

Check price on Amazon

The TL-SG108PE is the switch that makes link aggregation affordable at home. It is an 8-port gigabit Easy Smart managed switch with a web interface where you can create a link aggregation group, set up VLANs, and configure QoS and IGMP snooping. Four ports also supply PoE Plus, with a total power budget of 64 watts, so it can power access points or cameras alongside the bonded links. The fanless metal case runs silently. It does not fit a buyer who needs multi-gigabit ports, because every port here is 1 gigabit.

Spec Detail
Ports 8 gigabit RJ45
PoE 4 PoE Plus ports, 64 watt budget
Management Web interface, Easy Smart
Link aggregation Yes, through web interface
Model TL-SG108PE V3

Check price on Amazon

ASUS RT-AX88U Pro Gaming Router

Check price on Amazon

The RT-AX88U Pro is a Wi-Fi 6 gaming router that supports aggregation on both sides of the connection. Its two 2.5 gigabit ports can be bonded for WAN aggregation, combining a 2.5 gigabit port with a 1 gigabit port for up to 3.5 gigabits of WAN bandwidth, and its LAN ports support LAN aggregation, bonding two 1 gigabit LAN ports into a 2 gigabit link for a NAS or a desktop PC. It is a dual-band AX6000 router with AiProtection Pro, adaptive QoS, and AiMesh support. It does not fit a buyer on a 1 gigabit or slower plan, because there is no extra WAN bandwidth to aggregate.

Spec Detail
Wi-Fi Dual-band Wi-Fi 6, AX6000
Ports 2 x 2.5 gigabit WAN/LAN, 4 x gigabit LAN
WAN aggregation Up to 3.5 gigabits per second
LAN aggregation Two 1 gigabit ports bonded
Model RT-AX88U Pro

QNAP TS-664-8G-US NAS

Check price on Amazon

The TS-664 is the device where link aggregation pays off most visibly in a home. It is a 6-bay desktop NAS with two 2.5 gigabit Ethernet ports, and its port trunking feature bonds them for up to 5 gigabits per second of combined bandwidth. That matters when two PCs pull game libraries or media from the NAS at the same time, or when one PC backs up while another streams. Inside, it runs an Intel Celeron quad-core processor with 8 GB of memory, two M.2 PCIe slots for SSD caching, and a PCIe slot for expansion. It suits a household that already stores games, photos, or media centrally, and it does not fit a buyer who only needs simple backup for one PC.

Spec Detail
Bays 6 drive bays, diskless
Processor Intel Celeron quad-core
Network 2 x 2.5 gigabit Ethernet, port trunking
Combined bandwidth Up to 5 gigabits per second
Model TS-664-8G-US

Cable Matters Shielded Cat6 Cable

A bonded link is only as good as its weakest cable. This Cable Matters shielded Cat6 cable is rated for 10 gigabit data transfer, with foil shielding that cuts interference from nearby power cables and other runs. The 20-foot length covers a run from a desk to a switch across a room. For link aggregation, use the same category for both member links so neither link becomes the slow one. It does not fit a buyer who needs a 10 gigabit run longer than about 55 meters, because Cat6 supports 10 gigabit only up to that distance.

Spec Detail
Category Cat6, shielded
Data rate Up to 10 gigabits per second
Length 20 feet
Model 500114-BLK-20

How to Choose

Start from the device you want to speed up, not from the switch. If the goal is a faster NAS, confirm the NAS supports port trunking and has two Ethernet ports, then buy a managed switch and two matching cables. If the goal is a faster internet connection, confirm the plan exceeds 1 gigabit first, then look for a router with WAN aggregation. If the goal is a faster PC, check whether the PC has two network ports and an operating system that supports teaming; most desktop Windows PCs do not, and a single 2.5 gigabit adapter is usually the simpler upgrade. Match speeds across the bond, because mixing a 1 gigabit link with a 2.5 gigabit link wastes the faster port.

Who Should Skip

Skip link aggregation if the household has one wired PC and a 1 gigabit internet plan, because there is no second flow to spread. Skip it if the router and the switch are both unmanaged, since the bond cannot be created at all. Skip it if the goal is lower ping in games, because aggregation does not reduce latency on a single connection; a wired connection and a closer server do far more for ping than a second cable.

Frequently Asked Questions

Aggregated link speed is the combined throughput of two or more bonded Ethernet links. Two 1 gigabit links give up to 2 gigabits, and two 2.5 gigabit links give up to 5 gigabits. The total is shared across simultaneous flows, not given to any single flow.

No. Link aggregation cannot exceed what the internet plan delivers, and a single download still uses one member link. It raises the total capacity between devices on the local network, and it helps only when several transfers run at the same time.

It does not lower ping or raise the frame rate, and a single game session uses one link. It helps a gaming household when downloads, streams, and backups run at the same time, because the extra capacity keeps one transfer from starving the others.

Yes. The switch must be managed or smart-managed with link aggregation support, such as the TP-Link Easy Smart line. An unmanaged switch has no way to create a group, and two cables between the same two devices without a configured bond can cause a loop.

Final Verdict

Aggregated link speed is a real but narrow tool: it raises total capacity for parallel traffic and adds failover, and it does nothing for a single download or a single game. It earns its place when a NAS serves several PCs, when a household runs downloads and streams at once, or when an internet plan exceeds 1 gigabit and the router can aggregate the WAN side. Anyone with one wired PC and a 1 gigabit plan should skip the bond and buy a single faster link instead.

Explore Our Guides & Free Tools