- Top Pick: AMD Ryzen 7 7800X3D
- Runner-up: Samsung 990 PRO 2TB NVMe SSD
- Also consider: Sony DualShock 3 Wireless Controller
A real PlayStation 3 checks for a patch every time you launch a game and pulls down any add-on packs you bought. RPCS3 does neither. The emulator never phones home, so every update and piece of downloadable content has to be installed by hand, as a package file, using the same installer that handles digital PSN games.
As an Amazon Associate, we earn from qualifying purchases.
Done in the right order, the job takes a few minutes per game: base content, updates, DLC, then the licence files that unlock it. This guide walks through each step using only content from your own console and account, plus the version and region rules that decide whether an install works.
This article contains affiliate links, and we may earn a commission when you buy through them at no extra cost to you.
Quick Answer
In RPCS3, use File, then Install Packages/Raps/Edats, and select the .pkg files for your game updates and DLC, or drag them onto the emulator window. Install the matching .rap licence files from your own PS3 the same way. Packages must match your game’s exact serial and region, and installed content lands in dev_hdd0/game under the game’s title ID.
Where Your Own Updates and DLC Come From
Everything in this guide starts on a PlayStation 3 you own. Updates and DLC were delivered to your console under your account, and the only legitimate source for the files is that console. The RPCS3 Wiki’s dumping guide covers the process: with a file manager running on your PS3, you copy the content off your own machine.
Two kinds of files come across. Game updates and DLC are stored as .pkg package files, the same container Sony used for digital games. Paid add-ons also leave a small licence file on the console, with a .rap extension, covered below. Free updates never need a licence; paid DLC almost always does.
Keep each game’s files together in a folder named after the game. Update packages, DLC packs and licence files look identical in a downloads folder, and installing the wrong game’s package is the most common beginner mistake. The filename usually contains the title ID, which is your cross-check.
Installing Packages With the PKG Installer
RPCS3 has one installer for all package content. Open File, then Install Packages/Raps/Edats, and a file picker opens. Select a single .pkg, or several at once to batch-install a game’s update and DLC in one pass. Clicking Open starts the install, and a success message confirms each package. Dragging .pkg files onto the main RPCS3 window does the same thing, and is quicker for one or two files.
Order matters in one specific way: base content comes first. An update patches a game that must already exist, as a disc dump in the game list or an installed digital game. Install the game, then its updates, then its DLC. Within a set of updates, install oldest first; in practice most games settle on one final update package containing everything before it, so the newest single package is usually enough.
Licence files install through the same menu, copied to the right place automatically. Let each install finish before closing the emulator; an interrupted install is the usual cause of a game that appears in the list but refuses to boot.
RAP Licence Files: The Key Half of DLC
A .pkg on its own is only half of a paid download. The package holds the content in encrypted form, and the .rap file is the licence that proves your account bought it. Without the matching licence, the DLC installs without complaint and then stays locked: the game boots, the add-on never appears, and no error explains why.
On your PS3, licence files live in the exdata folder inside your user profile’s home directory, one .rap per purchase, named after the content it unlocks. RPCS3 mirrors that layout: installed licences sit in dev_hdd0/home/00000001/exdata inside the RPCS3 folder, and installing through the menu puts them there for you.
Three details save most troubleshooting. The licence must match the DLC package’s content ID exactly, so a licence from another region’s store will not unlock your copy. Some free DLC was published without a licence, and needs none. And a licence is tied to the purchase, not the machine, so the .rap files from your own console are the complete set for everything your account owns.
EDAT Files in Brief
Some content uses a second licence format, the .edat file, an encrypted data file certain games and add-ons check at launch, most often content activated on the console rather than bought as a simple download. The handling is identical: extract it from your own PS3 alongside the package and install it through the same File menu, which is why the menu is named Install Packages/Raps/Edats. If a game complains about missing licence data after a clean install, a missing .edat is the first thing to check.
Version and Region Discipline
An update package is built for one exact game: one serial number, one region. The serial is the code in RPCS3’s game list, in formats such as BLUS or BLES followed by digits, and is also printed on your disc and its case. A European update will not apply to a North American game, and RPCS3’s Quickstart warns that mixing regions can damage an install badly enough that the clean fix is starting that game again.
Before installing, check the version you already have in the game list’s Version column. After installing an update, that number should move to match. If it does not, the package was for a different serial or the install did not complete.
The same discipline applies to DLC: the add-on’s region must match the game’s region. If your game is a different region from your store account, the DLC you own may never match it.
Where Installed Files Land
Everything the installer unpacks goes into one place: the dev_hdd0/game folder inside your RPCS3 installation, in a subfolder named with the game’s title ID. The update, the DLC and the digital game’s own data all share that folder, which is why it grows quickly once a game with heavy add-ons is installed.
Knowing the location matters: backing up that folder preserves a game’s exact installed state, moving RPCS3 to a new PC means moving dev_hdd0 with it, and a title ID folder far smaller than its package means an unpack never finished.
Your saves are not in this folder. They live under dev_hdd0/home in the savedata folder, separate from game data, so removing installed content does not touch your progress.
Removing or Rolling Back an Update
There is no uninstall button for a single update, because on a real PS3 there never was one either. To roll back, remove the game’s installed data and rebuild it at the version you want. Delete the game’s title ID folder under dev_hdd0/game, which removes its updates and DLC together, then reinstall in order: base content first if it was a digital game, then the older update package, then the DLC and licences.
For disc games the job is smaller, since the disc dump lives outside dev_hdd0/game. Either way, saves survive in the separate savedata folder; the only cost is the reinstall time.
Hardware That Makes Package Work Smoother
AMD Ryzen 7 7800X3D
RPCS3 leans harder on the CPU than almost any other emulator, and the 7800X3D brings the single-thread performance the PS3’s Cell processor demands.
Specs:
– 8 cores, 16 threads, Zen 4 architecture
– Boost clock up to 5.0 GHz
– 96MB L3 cache with 3D V-Cache
Samsung 990 PRO 2TB NVMe SSD
Installed packages unpack into dev_hdd0/game, and a fully patched game with DLC takes real space. A fast 2TB NVMe drive keeps installs quick and gives a growing library room.
Specs:
– 2TB capacity, PCIe 4.0 x4 NVMe
– Read speeds up to 7,450 MB/s
– M.2 2280 form factor
Sony DualShock 3 Wireless Controller
The DualShock 3 is the controller PS3 games were designed around, pressure-sensitive face buttons included, and RPCS3 has a dedicated handler for it.
Specs:
– Original PlayStation 3 controller, model 99004
– Pressure-sensitive analogue face buttons
– Bluetooth wireless and USB wired play
Samsung T7 Portable SSD 1TB
Extracting packages from your PS3 means shuttling files between console and PC. A portable SSD makes those transfers fast and doubles as an archive for your extracted files.
Specs:
– 1TB capacity, USB 3.2 Gen 2 interface
– Reads up to 1,050 MB/s, writes up to 1,000 MB/s
– USB-C connection, both cable types included
WD Elements Desktop 14TB External Hard Drive
A high-capacity desktop drive is the backup copy of dev_hdd0 that protects a full installed library.
Specs:
– 14TB capacity, model WDBWLG0140HBK-NESN
– USB 3.0 Micro-B connection
– Desktop drive with external power supply
How to Choose
Choose your working order before anything else. If a game needs several files, the sequence is always base game, updates, DLC, licences, and batch-selecting them in that order in one pass saves repeated trips through the file picker.
Choose organisation over speed. One folder per game, named with its serial, holding its update, DLC and licence files together, prevents every cross-game mistake this guide warns about. Verify after each game: check the Version column moved and the DLC appears in-game, because a rollback costs a full reinstall of that title.
Who Should Skip
Skip this entirely if your PS3 games are disc dumps you play unpatched and offline; many run exactly as they shipped. Skip the DLC half if you no longer have access to the PS3 or account that bought the content, because the licence files exist only on that console. And skip package work if a game misbehaves for emulation reasons: an update fixes game bugs, not emulator compatibility, so check the game’s RPCS3 wiki page first.
FAQ
Why does my installed DLC not appear in the game?
The licence is missing or mismatched. Paid DLC needs its .rap file installed through the same menu, with content ID and region matching the DLC package and the game. Free DLC needs no licence, so if free content is missing too, check the package installed into the game’s title ID folder.
Can I install an update made for a different region?
No. Update and DLC packages are locked to one serial and region, and RPCS3’s Quickstart warns that mixing regions can corrupt the install. Match the code in the game list, such as BLUS or BLES, to the package first.
Where do my save games go when I remove an update?
Nowhere. Saves live in the savedata folder under dev_hdd0/home, separate from dev_hdd0/game, so deleting a title ID folder removes updates and DLC only.
Do I need a licence file for game updates?
No. Official title updates are free and install with no licence. Licence files belong to purchased content: digital games and paid DLC each need the .rap, and occasionally an .edat, that your own console holds for them.
Final Verdict
Installing updates and DLC in RPCS3 is a filing exercise, not a technical one. Take the packages and licences from your own PS3, respect the order of base game, updates, DLC and licences, match every serial and region, and confirm the version moved in the game list. Do that, and the emulator behaves like the console did.










