✅ Updated Nov 2026
Affiliate Disclosure: As an Amazon Associate, we earn from qualifying purchases. Links marked "Check on Amazon" are affiliate links — learn more.
⭐ Key Takeaways
Quick answer: Our top pick is MEKO Universal Stylus 2-Pack, with SanDisk 1TB Extreme microSDXC Card as a strong alternative.

The MSI Claw looks like a natural home for Nintendo DS games: a Windows handheld with a touchscreen, proper sticks and buttons, and Intel Core Ultra power far beyond anything the DS ever asked for. melonDS, the accuracy-first DS emulator, is a native Windows program, so nothing sits between the emulator and the hardware.

As an Amazon Associate, we earn from qualifying purchases.

The real work is not performance. It is arrangement: two small 256×192 screens and a touch layer have to live on a 7-inch 1080p or 8-inch 1200p touchscreen, and the Intel graphics deserve one deliberate renderer choice. Side by side on the smaller panel, each DS screen becomes a narrow strip — the layout section below solves that, and it matters more than any performance setting here. This walkthrough covers the install, BIOS and firmware expectations, layouts, touch play, and the settings that matter.

This article contains affiliate links, and purchases made through them may earn a commission at no extra cost to you.

Quick Answer

Download melonDS from the project site, extract it to a folder on the Claw, and play: most DS games boot on the built-in replacement BIOS with no files needed. Add dumps from your own DS for the system menu or DSi mode, choose the Hybrid layout with Auto sizing, and tap the bottom screen directly or with a stylus.

Install melonDS and Lay Out the Folders

melonDS is portable software. The project publishes the Windows build as a zip archive; extract it into a dedicated folder, on the internal drive or a microSD card, and run the executable. There is no installer and nothing written into the Windows registry: settings live in the same folder, so the installation backs up as one unit and a newer build swaps in freely.

Keep your game dumps in a separate library folder. Saves are written beside each game file, so the library folder is also your save folder — keep the two together and backup is one copy operation.

BIOS and Firmware: Start Free, Dump When You Need More

Since version 0.9.4, melonDS ships with a built-in replacement BIOS and can generate firmware, so system files are optional for ordinary DS play: most games boot with nothing supplied. The current release line is 1.1. Start there and only reach for dumped files when a feature needs them.

Real files from your own DS earn their place in specific situations: booting into the DS system menu instead of straight into a game, authentic boot behaviour, GBA-slot features, and titles that misbehave with the replacement. The files are bios9.bin at 4KB and bios7.bin at 16KB, plus firmware.bin at 128, 256 or 512KB depending on the source machine, produced with the project’s flashcart dumper and pointed to under Emu settings.

One trap catches many people. Firmware dumped from a DSi or 3DS is only 128KB of configuration data with no boot code, so it cannot start the system menu; the project’s FAQ notes those firmwares are not bootable, and advises keeping Boot game directly enabled when using one. For firmware boot, dump from an original DS or DS Lite. DSi mode has no shortcut: it needs the full DSi set from your own console — 64KB ARM9 and ARM7 BIOS files, the 128KB firmware and a NAND image of roughly 240MB.

Two Small Screens on One Small Panel

melonDS offers four arrangements. Natural stacks the screens as a real DS does. Vertical and Horizontal force a column or a row. Hybrid keeps one screen large and shrinks the other alongside it. On a desktop monitor, side-by-side layouts have room to breathe; on the 7-inch panel they do not, and on the 8-inch model they are merely tolerable.

Sizing matters as much as arrangement. Equal sizing splits the space evenly; emphasised sizing keeps one screen big and the other at native resolution; Auto reads how the running game configures its displays and picks the emphasis itself, which matters because games swap the action between screens mid-play. On the Claw, Hybrid with Auto sizing is the everyday answer: the action screen gets the panel and the map screen stays legible. Reach for Natural when a game treats both screens as one tall playfield, and use the rotation steps for book-style games. Docked to a monitor, separate windows can put one screen on each display.

Touch Play: Finger, Stylus and Pad at Once

The bottom screen was a touchscreen on real hardware, and on the Claw it still is. melonDS accepts mouse input as touch input, and Windows delivers taps on the panel as exactly that, so when the bottom screen is visible in your layout you can tap, drag and draw on it with a finger.

A finger is blunt, though, and the DS library is full of drawing, tracing and handwriting games designed around a fine plastic stylus. A passive capacitive stylus is the closest match to the original hardware: no pairing, no charging, no drivers, and a narrower tip that makes small targets far easier than a fingertip. The built-in gamepad works alongside touch — buttons, D-pad and sticks map in the input settings, so a game can be driven with the pad while your other hand handles the touch screen. Games that listen for blowing use the microphone options: white noise, triggered with the microphone hotkey, satisfies titles that only listen for loud noise.

Renderer, JIT and MSI Center M Modes

Two settings do the heavy lifting. The JIT recompiler translates the DS’s ARM code into native code and caches it, and the project treats it as the route to full speed on modest hardware — on any Claw it should simply be on. If a title crashes with the JIT enabled, disabling fast memory, then the JIT itself, is the documented diagnostic.

For the renderer, the project’s FAQ is candid about the trade. The software renderer is the most accurate option and the most intensive on the CPU; it draws at native resolution and can be threaded across cores. The OpenGL renderer hands 3D work to the graphics hardware — potentially faster, slightly less accurate — and unlocks internal resolution scaling, which the software renderer cannot offer. The scaling redraws only the 3D layer: backgrounds and sprites come from a separate 2D engine at native resolution, so a 3D racer sharpens dramatically while a 2D platformer gains little. On Arc graphics, OpenGL at 2x to 3x is the sensible range.

MSI Center M’s power modes, described in words, run from a quiet low-power mode through balanced to a performance mode. DS emulation is light work, so the lower modes are its natural home: sessions run long relative to native PC games, and the 8 AI+ model’s 80Wh battery stretches them further than the 53Wh and 54.5Wh packs in the smaller models. Keep the Intel Arc driver current; it is the layer every renderer talks to.

Saves, Sync and the Multiplayer Reality

melonDS detects each game’s save memory type automatically and writes a raw save file beside the game file, in the same format a flashcart uses. That makes the save the bridge between devices: copy a game and its save between the Claw and a desktop install and progress continues, with no conversion step. The Separate savefiles option redirects the regular save while savestates are in play, so experiments cannot overwrite your main progress. One documented exception: WarioWare DIY and Jam with the Band use a save type the project states it does not yet support.

Multiplayer deserves plain words. The project itself lists Wi-Fi as a work in progress. Local multiplayer is the half that functions: two instances, on one machine or across a home network, connect as two DS systems, and the Bind socket to any address option enables play over a LAN. The FAQ is blunt that the link is timing-sensitive and may not stay stable beyond two instances. Online play reaches only community-run replacement servers for the discontinued Nintendo Wi-Fi Connection.

Gear That Fits the Claw Setup

MEKO Universal Stylus 2-Pack

MEKO Universal Stylus 2-Pack

MEKO Universal Stylus 2-Pack

Check price on Amazon

A passive stylus restores the fine point the DS bottom screen was designed for, with a spare for the travel case.

Specs:

  • Tips: disc and fiber ends, replaceable, 6 replacement tips included
  • Dimensions: 5.5 x 0.35 x 0.35 inches
  • Compatibility: all capacitive touchscreens, no battery or pairing needed

See it on Amazon

SanDisk 1TB Extreme microSDXC Card

SanDisk 1TB Extreme microSDXC Card

SanDisk 1TB Extreme microSDXC Card

Check price on Amazon

The Claw’s card slot carries a full DS library plus larger games without touching the internal drive.

Specs:

  • Capacity: 1TB microSDXC, UHS-I
  • Maker-stated speeds: up to 190 MB/s read, 130 MB/s write
  • Ratings: C10, U3, V30, A2

See it on Amazon

Spigen Rugged Armor Pro Carrying Case

Spigen Rugged Armor Pro Carrying Case

Spigen Rugged Armor Pro Carrying Case

Check price on Amazon

A hard-shell case for the larger Claw models, with pockets for the charger and accessories.

Specs:

  • Model: AFA07463
  • Fit: MSI Claw 7 AI+ and Claw 8 AI+, plus Lenovo Legion Go
  • Material: not stated

See it on Amazon

Anker 341 USB-C Hub (7-in-1)

Anker 341 USB-C Hub (7-in-1)

Anker 341 USB-C Hub (7-in-1)

Check price on Amazon

One hub turns the Claw into a desk machine for separate-window layouts and wired sessions.

Specs:

  • Model: A8346
  • Video: HDMI output up to 4K
  • Charging: USB-C pass-through up to 85W to the host
  • Card slots: microSD and SD

See it on Amazon

Samsung T7 Portable SSD 1TB

Samsung T7 Portable SSD 1TB

Samsung T7 Portable SSD 1TB

Check price on Amazon

A DSi NAND image, your dumps and a savestate habit add up; an external SSD keeps them portable.

Specs:

  • Capacity: 1TB
  • Interface: USB 3.2 Gen 2, up to 10Gbps
  • Maker-stated speeds: up to 1,050 MB/s read, 1,000 MB/s write
  • Security: AES 256-bit hardware encryption

See it on Amazon

How to Choose

Choose your setup by the games you actually play. Touch-heavy titles argue for the stylus and a layout that keeps the bottom screen large; action games argue for Hybrid with Auto sizing and the gamepad mapped once, properly. If you never open the system menu and own no DSi titles, the built-in replacement BIOS is enough and dumping can wait. If firmware boot or DSi mode is the point, budget the time to dump the full file sets from your own hardware first. Mostly 2D? The threaded software renderer is the accurate default. Mostly 3D? OpenGL at 2x or 3x with the JIT on.

Who Should Skip

Skip this setup if multiplayer is your main reason for DS emulation: the project labels Wi-Fi a work in progress, and the online half depends on community servers. Skip DSi mode unless a specific DSi title is the goal, since it is experimental and demands the full dumped file set. And if you only play a handful of 2D games, the defaults plus the JIT will already feel right.

FAQ

Does melonDS on the Claw need BIOS files?

For DS games, no: since version 0.9.4 the emulator includes a replacement BIOS and generated firmware that boot most titles. Your own dumped files remain the faithful option for firmware boot, and DSi mode still requires the full DSi set from your own console.

Why will the DS system menu not boot with my firmware file?

Almost always because the firmware came from a DSi or 3DS. Those dumps are 128KB of configuration data without boot code, and the project states they are not bootable. Keep Boot game directly enabled with them, or dump from an original DS or DS Lite.

Can two people play DS multiplayer on one Claw setup?

Locally, within limits. Local Wi-Fi connects two melonDS instances on one machine or across a home network. The project warns the feature is timing-sensitive and may not stay stable beyond two instances, and labels Wi-Fi a work in progress.

Final Verdict

The MSI Claw removes the two frictions that follow DS emulation on most Windows machines: the emulator runs natively, and the touchscreen keeps the bottom screen a touchscreen. Set it up once — portable folder, Hybrid layout on Auto, JIT on, OpenGL at a modest scale, a low power mode — and the emulator disappears behind the library. Add real dumps from your own DS when firmware boot or DSi mode calls for them, and keep multiplayer expectations where the project puts them.

Explore Our Guides & Free Tools