- Top Pick: Keychron K3 Version 2 Wireless Mechanical Keyboard
- Runner-up: 8BitDo Ultimate 2C Wireless Controller
- Also consider: Xbox Wireless Controller in Carbon Black
Hotkeys are the fastest way to run an emulator: one key saves a state mid-boss-fight, another grabs a screenshot or jumps back a few seconds with rewind. The catch is that every project picked its own keys: the F1 that saves a state in one program opens a menu in another, and muscle memory from one emulator betrays you in the next.
As an Amazon Associate, we earn from qualifying purchases.
This guide is a cheat sheet built only from each project’s own documentation. Where an emulator publishes its defaults, they are listed exactly as documented. Where the official docs publish no default list, the table says so instead of repeating keys from forums, because an invented shortcut is worse than none.
This article contains affiliate links, and buying through them may earn this site a commission at no extra cost to you.
Quick Answer
RetroArch uses F2 to save a state, F4 to load, Spacebar to toggle fast forward, R to rewind and F8 for screenshots. PCSX2 saves with F1 and loads with F3. DuckStation documents Escape for its pause menu and F11 for fullscreen. Dolphin, PPSSPP and melonDS publish no default list, so check their hotkey settings screens.
Why the Defaults Differ
Each emulator was written by a different team, in a different era, with a different frontend tradition, so there was never a shared standard to inherit. Function keys were free real estate on early PC emulators, which is why states cluster on F1 to F4, but each project assigned them differently. Frontends add a second layer: the same emulator can answer to one set of keys standalone and another inside a frontend.
RetroArch Default Hotkeys
RetroArch is the one major project that publishes a complete official table, in the Libretro documentation, under Settings, Input, Hotkeys. The documented defaults:
| Action | Default key |
|---|---|
| Save state | F2 |
| Load state | F4 |
| Next save slot | F7 |
| Previous save slot | F6 |
| Fast forward, toggle | Spacebar |
| Fast forward, hold | L |
| Slow motion | E |
| Rewind | R |
| Pause | P |
| Reset | H |
| Menu | F1 |
| Screenshot | F8 |
| Fullscreen | F |
| Show FPS | F3 |
| Exit | Esc |
Two documented behaviours matter as much as the keys. Every bind can be changed in that same screen, and hotkeys can be bound to controller buttons, not just keys. And if you assign the Enable Hotkeys bind, it works as a modifier: hotkeys only fire while it is held, which stops gameplay buttons from triggering emulator functions by accident.
PCSX2 Default Hotkeys
PCSX2 keeps the classic layout its documentation has carried for years, built around the F1 to F3 family:
| Action | Default key |
|---|---|
| Save state | F1 |
| Load state | F3 |
| Next save slot | F2 |
| Previous save slot | Shift+F2 |
| Switch renderer to software mode | F9 |
Beyond that family, be careful: PCSX2’s published documentation does not state default keys for screenshots, fullscreen or fast forward, so lists assigning them are unofficial. F9 is the exception, documented in the project’s configuration guide for switching the video renderer into software mode when a game renders incorrectly.
DuckStation Default Hotkeys
DuckStation’s own project documentation lists only four default bindings:
| Action | Default key |
|---|---|
| Open pause menu | Escape |
| Toggle fullscreen | F11 |
| Temporarily disable speed limiter | Tab |
| Pause or resume emulation | Space |
Save state, load state and screenshot keys are not stated in the project’s published documentation, so this guide will not guess them. Open DuckStation’s hotkey settings to see the bindings your build uses; functions there can also be assigned to gamepad buttons, the practical route for couch play.
Dolphin, PPSSPP, melonDS and mGBA
Dolphin is the honest gap in most shortcut lists: the project itself acknowledges there is no comprehensive published list of its hotkeys, and every hotkey is user-configured under Options, Hotkey Settings. Defaults are therefore not stated in the official docs, and any printed list is unofficial.
PPSSPP’s official key-bindings documentation explains what each bindable action does, including fast forward and the state functions, but it publishes no default keys: not stated in the official docs.
The melonDS official FAQ points players to Config, Input and Hotkeys, noting hotkeys cover actions such as fullscreen and closing the lid, but publishes no default key list: not stated in the official docs.
mGBA is the exception in this group. Its official manual page lists real defaults:
| Action | Default key |
|---|---|
| Load state | F1 to F9 |
| Save state | Shift+F1 to Shift+F9 |
| Frame advance | Ctrl+N |
Screenshot, fullscreen and fast-forward defaults are not stated in that manual page.
One Safety Rule for Save States
A save state is a snapshot of the whole emulated machine, and snapshots are version-sensitive: a state written by one build may refuse to load after an update. Keep proper in-game saves on the virtual memory card as your durable progress, treat states as a convenience layer, and back up both before updating.
Remapping Hotkeys and Gamepad Combos
In RetroArch, open Settings, Input, Hotkeys, highlight a function and press the new key or gamepad button. Press Delete to clear a bind, or Space on a keyboard and Start on a pad to restore its default. For couch play, assign Enable Hotkeys to a spare pad button, commonly Select, then hold it and tap the button bound to save state, load state or screenshot, so normal presses never trigger them mid-game. DuckStation’s hotkey settings likewise accept gamepad buttons for its functions. In Dolphin, build the layout you want once in Hotkey Settings and it applies to every game.
Gear That Makes Hotkeys Easier
Hotkey-heavy play rewards reachable function keys and spare buttons. These five picks cover the keyboard, pad and storage sides.
Keychron K3 Version 2 Wireless Mechanical Keyboard
Most compact boards drop the function row that emulator hotkeys live on. The K3 keeps all 84 keys, F1 to F12 included, in a slim layout, so RetroArch and PCSX2 defaults stay under your fingers, over Bluetooth or a cable.
Specs:
– Layout: 84 keys, 75 percent layout, full function row
– Switches: low-profile Keychron mechanical, Brown
– Connectivity: Bluetooth 5.1 and USB-C wired
– Polling rate: 1000 Hz wired, 90 Hz wireless
– Battery: 1550 mAh rechargeable
– Weight: about 483 g
See the Keychron K3 Version 2 on Amazon
8BitDo Ultimate 2C Wireless Controller
The extra remappable L4 and R4 bumpers are the draw here: give one to RetroArch’s Enable Hotkeys bind and every state, rewind and screenshot combo sits on the pad, with Hall Effect sticks and triggers for the game controls.
Specs:
– Compatibility: Windows PC and Android
– Connectivity: 2.4 GHz wireless, Bluetooth and wired
– Polling rate: 1000 Hz on 2.4 GHz and wired connections
– Sticks and triggers: Hall Effect, with wear-resistant metal joystick rings
– Extra buttons: remappable L4 and R4 bumpers
– Weight: 280 g
See the 8BitDo Ultimate 2C on Amazon
PlayStation DualSense Wireless Controller
DuckStation and PCSX2 players get a pad shaped like the controllers those consoles used, plus spare inputs emulators can use: a touchpad and a Create button outside normal gameplay, ready to carry menu or screenshot binds.
Specs:
– Model: CFI-ZCT1W, White
– Feedback: haptic feedback and adaptive triggers
– Audio: built-in microphone and 3.5 mm headset jack
– Buttons: 17, including touchpad and Create button
– Battery: built-in rechargeable, 1560 mAh
– Weight: 280 g
See the PlayStation DualSense on Amazon
Xbox Wireless Controller in Carbon Black
The default pad for PC gaming, and a safe emulation choice: every emulator here supports it, the Share button gives hotkey setups one more input than older pads offered, and AA batteries mean a flat pad is fixed in seconds.
Specs:
– Model: QAT-00001, Carbon Black
– Connectivity: Xbox Wireless, Bluetooth and USB-C wired
– Controls: hybrid D-pad, Share button, textured grip
– Audio: 3.5 mm headset jack
– Power: 2 AA batteries, up to 40 hours as stated by Microsoft
See the Xbox Wireless Controller on Amazon
Samsung T7 Portable SSD 1TB
Save states, screenshots and whole game libraries add up fast, and states are exactly the files you cannot afford to lose to a dying drive. The T7 keeps a full emulation library portable between desktop, laptop and handheld dock, with fast transfers when you reorganise.
Specs:
– Capacity: 1 TB, model MU-PC1T0T/AM
– Interface: USB 3.2 Gen 2
– Speeds: read up to 1050 MB/s, write up to 1000 MB/s
– Security: AES 256-bit hardware encryption
– Dimensions: 3.3 x 2.2 x 0.3 inches
– Weight: 2.08 ounces
See the Samsung T7 Portable SSD on Amazon
How to Choose
Start with your main emulator, not the hardware. If it publishes defaults, learn them before changing anything; if it does not, open its hotkey screen and note what your build uses. Keyboard players should insist on a real function row, since states, menus and screenshots live there in RetroArch, PCSX2 and mGBA. Couch players should choose a pad with one spare button for a hotkey-enable or menu role. Where an emulator allows remapping, align its save and load keys with the layout you already know, and write the result down.
Who Should Skip
Skip the deep setup if you play one emulator only and its defaults already feel natural; there is nothing to fix. Players on closed handheld frontends with fixed combo maps can skip remapping too, since the frontend owns those binds. And if you never use save states, screenshots or fast forward, the in-game save system alone will serve you fine.
FAQ
Why does F1 open a menu in RetroArch but save in other emulators?
Because each project assigned its own keys. Libretro’s documentation puts the RetroArch menu on F1 and states on F2 and F4, while PCSX2 and mGBA both use the F1 family for loading states. Neither is wrong; they are different conventions, never coordinated.
Can I force every emulator to use the same hotkeys?
Mostly, where remapping exists. RetroArch and DuckStation let you rebind hotkey functions freely, and Dolphin’s Hotkey Settings are entirely user-defined. The limit is features, not keys: rewind, for example, exists in RetroArch but is not a universal function, so no layout can add it where the emulator lacks it.
Do save states survive emulator updates?
Not always. States are tied to the build that wrote them, and a new version can reject older states. Keep in-game memory card saves as your real progress, and back up state folders before updating, so a failed state never costs you a playthrough.
How do I use hotkeys from the couch without a keyboard?
Bind the hotkey functions to gamepad buttons. RetroArch goes further with its Enable Hotkeys bind: hold one pad button and tap another to save, load or shoot, which keeps single presses safe for gameplay. A compact keyboard with a function row is the fallback for desk setups.
Final Verdict
There is no universal emulator keyboard, and pretending otherwise is how bad shortcut lists happen. Learn the documented defaults for the emulators you run, RetroArch’s F2 and F4, PCSX2’s F1 and F3, DuckStation’s Escape and F11, then remap the rest into one layout and put it on gamepad combos for the couch. That mix of verified defaults plus deliberate remapping is what makes hotkeys feel instant instead of treacherous.










