✅ Updated Nov 2026
Affiliate Disclosure: As an Amazon Associate, we earn from qualifying purchases. Links marked "Check on Amazon" are affiliate links — learn more.
⭐ Key Takeaways
Quick answer: Our top pick is SanDisk 128GB Ultra microSDXC Card, with UGREEN USB 3.0 SD Card Reader as a strong alternative.

Most game systems need a PC accessory or a capture device before you can back them up, but the 3DS is its own dumping station. Once the console runs custom firmware, a free tool called GodMode9 reads the cartridge in the slot and the titles installed on the card, and writes clean files to a folder on that same card. No PC-side reader exists for 3DS cartridges, so the console route is not a workaround; it is the method.

As an Amazon Associate, we earn from qualifying purchases.

This guide walks the whole workflow on your own hardware: cartridges first, then digital games, updates and DLC, then the save files a game dump leaves behind, and finally what the Azahar emulator expects those files to look like. Everything here starts from games you own, on a console you own.

Some links in this article are affiliate links, which means the site may earn a commission on qualifying purchases at no extra cost to you.

Quick Answer

On a 3DS running custom firmware, hold Start while powering on to launch GodMode9, open the [C:] GAMECART drive, select the trimmed .3ds entry and copy it to the /gm9/out folder for a cartridge dump. Installed games, updates and DLC come out as CIA files through the Title manager instead, and saves need a separate tool such as Checkpoint.

What You Need Before You Start

GodMode9 does not run on a stock console. The prerequisite is custom firmware installed the documented way, which in practice means boot9strap with Luma3DS, exactly as the 3DS Hacks Guide lays out. With that in place, GodMode9 itself is a single payload file: the GodMode9.firm file goes into the /luma/payloads folder on the card, the gm9 folder sits at the card root, and holding Start while you power on boots straight into it. Keep GodMode9 current; the menus here match version 2.0.0 and later.

Space is the other requirement. A 3DS cartridge holds anything from a few hundred megabytes to several gigabytes, and a dump writes the whole image to /gm9/out before you move it anywhere. Building a CIA from a cartridge file needs roughly another cartridge worth of free space on top, so clear room first: the console card is working space, the PC library is the archive.

Dumping a Cartridge: The [C:] GAMECART Drive

Insert the cartridge, boot into GodMode9 and open [C:] GAMECART. This is a virtual drive: GodMode9 presents the inserted cartridge as files even though nothing has been copied yet. A 3DS cartridge shows two image entries, the full dump named with its title ID and a .3ds extension, and a second entry marked .trim.3ds. The difference is padding: a full dump copies the cartridge to its nominal capacity, blank space included, while a trimmed dump stops where the real data stops. The content is identical either way, so the trimmed file is the sensible default: select it, choose Copy to 0:/gm9/out, and the file lands in /gm9/out on your card.

The same NCSD image options menu holds three more commands: Build CIA from file converts the cartridge image into an installable CIA, Install game image writes the cartridge onto the console itself as a digital title, and Decrypt file writes a decrypted copy to /gm9/out, which matters for emulators below. DS cartridges dump to .nds in the same drive, with one caveat from the guide: trimmed DS dumps can cause playback issues, so copy the full DS image instead.

Digital Games, Updates and DLC

Anything you bought from the eShop lives on the card as an installed title, and GodMode9 dumps it through a different door. Press Home inside GodMode9, open the Title manager, and choose [A:] SD CARD for your own installed games. Pick a title, open Manage Title and select Build CIA (standard). The result is an installable CIA in /gm9/out, a backup of your purchase. System titles and DSiWare sit under [1:] NAND / TWL in the same manager.

The part people miss is that updates and DLC are separate titles with their own entries in that list. A cartridge dump contains the base game only, exactly as it shipped, and the update you downloaded in 2016 is a different title on the card. Dump each update and DLC pack separately, the same Title manager way, and keep the files together. With the eShop closed to new purchases, the installed copies on your card are the ones that matter, which makes this step the real preservation work.

Do Not Forget the Saves

A game dump does not carry your progress. Save data lives apart from the game files, on the cartridge or in the console’s save storage, and installing or dumping a game never copies it across. The standard companion tool is Checkpoint, a save manager that runs on the modded console and backs up or restores saves per title, writing them to a folder on the card beside the dumps. JKSM is the other long-standing manager and does the same job. Run one of them for every game you care about before reorganising cards, because a wiped card takes the saves with it.

Verify and Store the Results

GodMode9 names its output by title ID, which is precise and unreadable. Rename each file to the game’s name but keep the title ID somewhere in the filename, because updates, DLC and saves all match by title ID. Then verify the copy the simple way: note the file size against what GodMode9 reported, and if you want certainty, generate a checksum on the PC and keep it with the file. A second dump of the same cartridge should match it exactly; a mismatch means dump again from a clean, firmly seated cartridge rather than trusting the first file. Finally, copy /gm9/out off the card. The console card is a workbench, not an archive.

What Azahar Wants From Your Dumps

Azahar, the maintained successor to Citra, is strict about one thing: it loads decrypted files only, and it ships with no keys. Decrypted cartridge images, the .3ds or .cci files this workflow produces, open directly. CIA files install through its Install CIA menu entry, so you add the base game first and its update and DLC CIAs on top. Decrypted .cxi files and .3dsx homebrew are also accepted. An encrypted file is rejected outright, with no setting that changes it; the fix is always on the console side, by dumping or decrypting with GodMode9 on your own hardware. One practical note: if a front-end refuses the .3ds extension, renaming the same file to .cci works, because both names describe the identical cartridge image.

SanDisk 128GB Ultra microSDXC Card

SanDisk 128GB Ultra microSDXC Card

SanDisk 128GB Ultra microSDXC Card

Check price on Amazon

The console card is where dumps are born, and 128GB swallows a shelf of cartridges plus their updates without mid-dump space failures. This is the card that lives in the console.

Specs:
– Capacity: 128GB
– Model: SDSQUAB-128G-GN6MA
– Speed class: Class 10, U1, A1
– Read speed: up to 140 MB/s
– Format: microSDXC, UHS-I

See it on Amazon

UGREEN USB 3.0 SD Card Reader

UGREEN USB 3.0 SD Card Reader

UGREEN USB 3.0 SD Card Reader

Check price on Amazon

Every dump ends the same way: card out of the console, into a reader, files onto the PC. A USB 3.0 reader makes that a couple of minutes instead of a chore you postpone.

Specs:
– Model: 40752
– Interface: USB 3.0, up to 5 Gbps
– Slots: SD and microSD, read simultaneously
– Compatibility: SDXC, SDHC, microSDXC, microSDHC
– Cable: built-in short USB cable

See it on Amazon

Samsung T7 Portable SSD 1TB

Samsung T7 Portable SSD 1TB

Samsung T7 Portable SSD 1TB

Check price on Amazon

Dumps multiply quietly: base games, updates, DLC, saves and a checksum for each. A fast portable SSD is the archive they land on, big enough for a full 3DS library and quick enough that backing up never feels like a project.

Specs:
– Capacity: 1TB
– Model: MU-PC1T0T/AM
– Interface: USB 3.2 Gen 2
– Read speed: up to 1,050 MB/s
– Write speed: up to 1,000 MB/s
– Encryption: AES 256-bit hardware encryption

See it on Amazon

Smatree Carrying Case for Nintendo 3DS XL

Smatree Carrying Case for Nintendo 3DS XL

Smatree Carrying Case for Nintendo 3DS XL

Check price on Amazon

Dumping a collection takes evenings, and the cartridges waiting their turn deserve better than a drawer. This hard shell fits the XL consoles and keeps carts corralled in one place.

Specs:
– Model: Smatree-SC022
– Dimensions: 7.7 x 4.8 x 3.1 inches
– Shell: hard protective shell
– Material: polyurethane and microfiber
– Fits: Nintendo New 3DS XL and 2DS XL
– Game card slots: not stated

See it on Amazon

Anker PowerLine II USB-C to USB-C Cable

Anker PowerLine II USB-C to USB-C Cable

Anker PowerLine II USB-C to USB-C Cable

Check price on Amazon

The reader, the SSD and the PC all meet over USB-C, and a cable with a real data rating keeps transfers moving. This braided two-pack covers the desk and the travel bag.

Specs:
– Model: A8752
– Connectors: USB-C to USB-C, USB 2.0
– Data transfer: up to 480 Mbps
– Charging: up to 60W Power Delivery
– Length: 3.3 ft per cable, 2-pack
– Jacket: nylon braided

See it on Amazon

How to Choose

Start with the card: size it for your whole cartridge shelf plus update data, not for the next game in the pile. The reader is a speed purchase; USB 3.0 matters when a card holds tens of gigabytes of fresh dumps. Treat the archive drive as permanent storage and buy capacity for the finished library, checksums and saves included. A case only needs to fit your console model, XL or standard. Cables are the boring detail that caps everything else, so check the data rating, not just the connector shape.

Who Should Skip

Skip this if your console is stock and you are not willing to install custom firmware, because there is no other route in and no PC reader to fall back on. Skip it if your whole library is two cartridges you still play on the console itself; the setup time dwarfs the benefit. Skip it, obviously, if the games are not yours: this workflow exists to back up your own cartridges and purchases, and it offers nothing to anyone looking for copies of games they do not own. And skip the emulator step if you only want console backups; the CIAs alone already protect your digital purchases.

FAQ

Is a trimmed dump missing part of the game?

No. Trimming removes only the blank padding beyond the game’s real data, which is why the 3DS Hacks Guide builds its standard cartridge workflow around the trimmed file. The exception is DS cartridges, where the guide advises against trimmed dumps because they can cause playback issues.

Will my dumps work in Azahar straight away?

Yes, provided they came off your own console through GodMode9. Azahar accepts decrypted .3ds and .cci images directly and installs decrypted CIA files, and files produced this way are exactly that. Encrypted files are refused, with no workaround inside the emulator.

Do updates and DLC come with the cartridge dump?

No. The cartridge holds the base game as it shipped. Updates and DLC are separate installed titles on the card, so dump each one through the Title manager as its own CIA and install them in Azahar after the base game.

Can I dump a borrowed or rented cartridge?

No. This guide covers backing up games you own, on your own console. A borrowed cartridge is someone else’s copy, and dumping it falls outside the workflow and the principle behind it.

Final Verdict

For 3DS preservation, the console is the tool: GodMode9 turns a modded 3DS into a tidy dumping station that produces exactly the decrypted .3ds and CIA files emulators like Azahar ask for. Work through cartridges with the trimmed copy in GAMECART, pull digital titles, updates and DLC out of the Title manager as CIAs, and run Checkpoint so the saves survive too. Verify, rename with the title ID kept, archive off the card, and your library no longer depends on ageing cartridges or a closed shop.

Explore Our Guides & Free Tools