✅ Updated Nov 2026
Affiliate Disclosure: As an Amazon Associate, we earn from qualifying purchases. Links marked "Check on Amazon" are affiliate links — learn more.
⭐ Key Takeaways
Quick answer: Our top pick is ASUS ZenScreen Touch MB16AMT Portable Monitor, with One by Wacom Medium Drawing Tablet CTL672 as a strong alternative.

Every Nintendo DS and 3DS game was designed for two screens at once, and every single-monitor emulator layout is a compromise that shrinks one screen, stacks the pair into a tall column, or hides one display behind a swap key. A dual-monitor desk removes the compromise: each emulated screen gets a full physical panel, at a readable size, with the touch screen close enough to tap. It is the closest a PC comes to the original clamshell hardware.
The catch is that support is uneven. Azahar, the 3DS emulator, can genuinely split its two screens into separate windows. melonDS, the leading DS emulator, cannot do that yet, whatever its release notes about multiple windows might suggest. This guide works through what each project actually documents, how to arrange the windows, the touch options for the bottom screen, and honest scaling expectations.

As an Amazon Associate, we earn from qualifying purchases.

This article contains affiliate links, and purchases made through them may earn us a commission at no extra cost to you.

Quick Answer

Yes, with the right emulator. Azahar’s Separate Windows layout splits the 3DS screens into two windows you can drag onto two monitors, with the bottom window on a touch display for stylus play. melonDS cannot split its screens yet, so DS play on two monitors means one wide or tall window using its layout and sizing options.

Why Two Screens Change the Setup

The DS carries two identical 256×192 panels, one of them a touchscreen. The 3DS pairs a wider 400×240 top screen with a 320×240 touch screen. On a single monitor, both emulators squeeze that pair into one window, so the screens end up small, uneven, or both. Give each screen its own monitor and both stay large and legible, the touch screen can sit low on the desk, and a gamepad handles the buttons while your other hand works the pointer. Neither emulator spans one image across two monitors; the effect comes from separate windows on separate displays.

Azahar: The True Two-Window Route

Azahar’s layout setting, under Emulation, Configure, Graphics, Layout, offers Default, Single Screen, Large Screen, Side by Side, Separate Windows, Hybrid Screen and Custom Layout. Separate Windows is the one this guide is built on: each 3DS screen renders in its own window, dragged wherever you like, including onto different monitors.

The setup outline is short. Set Windows to Extend these displays, so each monitor is its own desktop. Start Azahar, choose Separate Windows, and load a game from your own library of 3DS dumps. Drag the top-screen window to your main monitor and the bottom-screen window to the second display, then size each to taste. The windows are independent, so mismatched monitor sizes are fine; each screen simply fills its own window.

Touch follows the bottom window. Azahar takes mouse input as touchscreen input, so clicking the bottom screen presses it, and on a touch-capable second monitor your taps land directly, the closest equivalent to the original stylus. A gamepad covers the buttons, sticks and triggers, so play alternates between pad and pointer as it did on the handheld.

Two more documented tools round out the route. Layout is a per-game decision: Azahar supports per-game configuration through a game’s Properties, so a stylus-heavy title can keep Separate Windows while the rest of your library uses Large Screen. And the Custom Layout option reads exact pixel coordinates for each screen from Azahar’s configuration file, suiting picture-in-picture arrangements or precise splits on one large monitor; community layout generators exist to produce those coordinates.

melonDS: What the Documentation Actually Offers

Set expectations first: melonDS cannot put its touch screen in a separate window today. The project’s own README keeps a public to-do list, and support for rendering screens to separate windows is still on it. The multiple windows feature in the project’s 1.0 release notes means something else: multiple emulator instances inside one process, built so two players can run linked instances for local multiplayer. It does not split one game’s screens.

What the official melonDS FAQ does document is a flexible single window. Screen layout keeps the screens stacked like a real DS in Natural mode, or aligns them horizontally or vertically. Screen sizing keeps both screens equal, or emphasizes one while the other stays at native resolution, with an Auto mode that decides from how the game uses its displays. Window size snaps to integer scales from 1x to 4x, a mid-screen gap setting separates the panels, rotation handles book-style games played sideways, and screen filtering softens an enlarged image.

So the practical melonDS arrangement is one tall or wide window on your larger display, or on a portrait monitor where the stacked Natural layout fits naturally, while the second monitor stays free for everything else. DS emulation also needs the BIOS and firmware files dumped from your own DS, as the FAQ spells out; DSi mode asks for its own set from your own DSi. If a true split is non-negotiable, the honest answer is that the feature is planned, not shipped.

Putting the Touch Screen on the Second Monitor

Three pointer options cover the bottom screen, in descending order of fidelity. A touch-capable portable monitor is the most faithful: taps register directly on Azahar’s bottom window, and a small panel can lie flatter than a fixed monitor. If you add one, run the Windows touch identification setup afterwards so taps map to the correct display. A plain monitor plus a mouse is simplest and precise enough for menus and maps, though drawing games feel cramped through a cursor. A pen tablet is the middle path: map it to the second display in its driver settings, and the pen becomes a stylus over the bottom window.

For window management, Extend mode plus the Windows snap shortcuts is all you need: drag each Azahar window to its monitor, snap or size it, and leave the arrangement alone.

Scaling and Aspect Ratio, Honestly

The DS is the tidy case: two identical 4:3 screens scale by clean integers, so a 4x screen is 1024×768 and fits comfortably inside a 1080p monitor, with melonDS’s filtering available when you stretch beyond integer sizes. The 3DS is the awkward case: its screens are different shapes as well as sizes, so no shared scale factor makes both fill two similar monitors edge to edge. Expect borders on at least one display, the price of undistorted geometry. Azahar renders its 3D at an internal resolution multiple set separately from window size, so a large window does not force a heavier render load. What two monitors cannot fix is a game that needs both screens in one glance at equal size; that design belonged to the clamshell, and every PC layout approximates it.

Single-Monitor Fallbacks

If the second screen goes away, both emulators fall back gracefully. Azahar’s Large Screen keeps the top screen dominant with the bottom screen visible beside it, Hybrid Screen overlays the pair in one frame, Side by Side suits a wide monitor, and Custom Layout coordinates can carve one ultrawide into two zones. melonDS leans on sizing emphasis: give the main screen the space and let the secondary panel ride at native resolution, or stack both in Natural layout on a portrait display.

Gear for a Two-Monitor Setup

ASUS ZenScreen Touch MB16AMT Portable Monitor

ASUS ZenScreen Touch MB16AMT Portable Monitor

ASUS ZenScreen Touch MB16AMT Portable Monitor

Check price on Amazon

A portable touch panel is the natural bottom screen: light enough to lay low on the desk, with taps landing directly on Azahar’s touch window.
Specs:

  • Display: 15.6-inch IPS
  • Resolution: 1920×1080
  • Touch: 10-point multi-touch
  • Inputs: USB-C hybrid signal and Micro-HDMI
  • Battery: built-in 7,800 mAh

ASUS ZenScreen Touch MB16AMT Portable Monitor on Amazon

One by Wacom Medium Drawing Tablet CTL672

One by Wacom Medium Drawing Tablet CTL672

One by Wacom Medium Drawing Tablet CTL672

Check price on Amazon

A pen tablet mapped to the second monitor turns stylus games into pen work, with pressure levels a fingertip cannot offer.
Specs:

  • Model: CTL672K1A
  • Active area: 216 x 135 mm
  • Pen: battery-free, 2,048 pressure levels
  • Interface: USB, 1 m cable
  • Weight: 420 g

One by Wacom Medium Drawing Tablet CTL672 on Amazon

VIVO Single Monitor Arm Desk Mount STAND-V001O

VIVO Single Monitor Arm Desk Mount STAND-V001O

VIVO Single Monitor Arm Desk Mount STAND-V001O

Check price on Amazon

An arm lets the second screen drop to desk level and tilt like the bottom half of a clamshell, instead of looming at eye height.
Specs:

  • Model: STAND-V001O
  • Screen size: 17 to 32 inches
  • VESA: 75x75mm and 100x100mm
  • Type: mechanical counterbalance arm, height adjustable
  • Weight capacity: not stated

VIVO Single Monitor Arm Desk Mount STAND-V001O on Amazon

UGREEN 8K HDMI 2.1 Cable 2M

UGREEN 8K HDMI 2.1 Cable 2M

UGREEN 8K HDMI 2.1 Cable 2M

Check price on Amazon

The second monitor needs a cable run either way, and a certified Ultra High Speed cable keeps the link trouble-free.

Specs:

  • Standard: HDMI 2.1, certified Ultra High Speed
  • Bandwidth: 48 Gbps
  • Resolutions: 8K at 60Hz and 4K at 240Hz as listed by the maker
  • Length: 2 m
  • Features: eARC, HDCP 2.2 and 2.3

UGREEN 8K HDMI 2.1 Cable 2M on Amazon

8BitDo Pro 2 Bluetooth Controller Hall Effect

Buttons, sticks and triggers belong on a pad while your other hand handles the pointer, and this one pairs over Bluetooth or USB-C.

Specs:

  • Model: 6922621505051
  • Sticks: Hall Effect joysticks
  • Back buttons: 2 Pro paddle buttons
  • Connectivity: Bluetooth 4.0 and USB-C
  • Battery: 1,000 mAh, up to 20 hours as stated by the maker

8BitDo Pro 2 Bluetooth Controller Hall Effect on Amazon

How to Choose

Choose the emulator by system first: Azahar if you want a true two-window 3DS setup today, melonDS for DS with the understanding that its screens stay in one window. Choose the bottom display by how touch-heavy your library is: a touch portable monitor for stylus-driven games, a pen tablet if you already draw, a plain monitor and mouse if the touch screen is mostly menus. Place the top screen on the main monitor at eye level and the bottom screen low and close. Finally, decide layouts per game rather than globally, because a map-screen RPG and a touch-driven puzzler want different arrangements.

Who Should Skip

Skip this setup if your library is mostly DS games and a split screen is the whole point, because melonDS does not offer one yet. Skip it if you play at a single small desk screen by choice; the one-window fallbacks are good, and a second monitor adds little. Skip it, too, if your 3DS dumps are still encrypted and you have no way to produce decrypted images or the key file from your own console, because Azahar will not load them in any layout.

FAQ

Can melonDS put the touch screen on a second monitor?

No. Rendering the screens to separate windows is still on the project’s public to-do list. The multiple windows in its recent release notes are separate emulator instances for local multiplayer, not a split of one game’s screens.

Do I need a touch monitor for the bottom screen?

No. A mouse works on any display, and a pen tablet mapped to the second monitor is closer to a stylus. A touch monitor is simply the most direct option, because taps land on the bottom window with no intermediary pointer.

Must both monitors match in size or resolution?

No. Azahar’s Separate Windows layout gives each screen an independent window, sized on its own monitor. The 3DS screens are different shapes anyway, so expect borders rather than an edge-to-edge fit.

Can a television serve as the second screen?

Yes, any display Windows can extend onto works. Keep the touch screen on a desk display within reach, though, since a television across the room cannot take taps or a nearby mouse comfortably.

Final Verdict

Two monitors are the most faithful way to play DS and 3DS games on a PC, but the two systems arrive there by different roads. Azahar delivers the real thing for 3DS: Separate Windows, a touch display under the bottom screen, and per-game layouts. melonDS remains a one-window emulator for DS, excellent inside that window and honest about the split still being planned. Build the desk around Azahar’s route, enjoy melonDS in a well-arranged single window, and the setup serves both libraries.

Explore Our Guides & Free Tools