- Top Pick: Lenovo Legion Go S
- Runner-up: MEKO Universal Stylus 2-Pack
- Also consider: SanDisk 1TB Extreme microSDXC Card
The Legion Go S hands Nintendo DS emulation a panel the original hardware never had: an 8-inch 1920×1200 touchscreen in a fixed unibody shell, running Windows on a Ryzen Z2 Go. melonDS, the accuracy-first DS emulator, ships as a native Windows program, so on the Windows model nothing is sandboxed between the emulator and the machine.
As an Amazon Associate, we earn from qualifying purchases.
What decides the experience is not raw power — the DS asks little of a modern chip. It is arrangement and expectations: two 256×192 screens and a touch layer sharing one panel, a choice between a built-in replacement BIOS and dumps from your own console, and a multiplayer feature the project itself describes cautiously. This walkthrough covers the install, the BIOS routes, layouts, touch play, saves, and power modes.
This article contains affiliate links, and purchases made through them may earn a commission at no extra cost to you.
Quick Answer
Install melonDS as a portable folder on the Windows Go S and most DS games boot immediately on the built-in replacement BIOS, no files needed. Use the Natural layout at three times scale on the 1200p panel, turn the JIT on, keep touch on the bottom screen with a finger or stylus, and add dumps from your own DS only for firmware boot or DSi mode.
Install melonDS as a Portable Folder
melonDS has no installer. The project publishes the Windows build as a zip archive; extract it into a dedicated folder — the internal SSD is the natural home — and run the executable. Settings live in that same folder rather than the Windows registry, so the whole install backs up as one unit and a newer build swaps in freely.
Keep game dumps in a separate library folder, on the SSD or a microSD card. melonDS writes each game’s save file beside the game file itself, so the library folder doubles as your save folder: one copy operation backs up games and progress together. Add melonDS to Legion Space as a shortcut so it launches from the gamepad-friendly side of the machine, and map the controls once in the input settings — the Go S gamepad is a standard Windows controller to melonDS.
BIOS and Firmware: Two Honest Routes
Since version 0.9.4, melonDS includes a built-in replacement BIOS, often called FreeBIOS, and can generate basic firmware. For ordinary DS play that is the whole story: most games boot directly with no system files supplied. Start there.
Dumps from your own DS earn their place for specific jobs: booting into the DS system menu instead of straight into a game, authentic boot behaviour, and the minority of titles that misbehave with the replacement. The files are bios9.bin at 4KB and bios7.bin at 16KB, plus firmware.bin, produced with the project’s flashcart dumper and pointed to under the DS-mode settings.
The trap is firmware size. A regular DS or DS Lite firmware dump is 256KB; a dump taken from a DSi or 3DS in DS mode is only 128KB, and the project’s FAQ is explicit that those files contain configuration data without boot code — they are not bootable. With one loaded, keep Boot game directly enabled, or dump from an original DS or DS Lite for firmware boot. DSi mode has no shortcut: it requires the full set from your own DSi — 64KB ARM9 and ARM7 BIOS files, the 128KB firmware and a NAND image of roughly 240MB.
Two Screens on an 8-Inch Panel
The Go S panel suits the DS’s stacked shape unusually well. The two screens together are 256×384 at native resolution, and this display’s 1200-pixel height fits that stack at three times scale — 1152 pixels. The Natural layout, screens stacked as on real hardware, is therefore the default recommendation: both screens stay large.
The alternatives earn their place per game. Side by side, the pair spans 512 pixels wide and can scale wider, but each screen ends up short — fine for titles where the bottom screen is a map, poor for touch-heavy play. Hybrid keeps one screen large and shrinks the other alongside it, and the sizing options decide the split: equal, emphasised, or Auto, which reads how the running game uses its displays and picks the emphasis itself — the set-and-forget choice, since games swap the action between screens mid-play. Rotation handles book-style titles.
Touch Play: Finger First, Stylus When It Matters
The bottom screen was a touchscreen on real hardware, and on the Go S it still is one. melonDS accepts mouse input as touch input, and Windows delivers taps on the panel as exactly that, so wherever the bottom screen sits in your layout you can tap, drag and draw on it directly. Buttons, D-pad and sticks work at the same time through the input mapping, so the pad drives the game while your other hand handles touch.
A fingertip is blunt, though, and the DS library is built around a fine plastic stylus: drawing, tracing, handwriting and small menu targets all assume one. A passive capacitive stylus is the closest match to the original — no pairing, no charging, no drivers, just a narrower point. Keep expectations honest either way: the Go S panel is a modern capacitive screen, not the DS’s resistive one, so pressure-based tricks from real hardware do not carry over.
JIT, Renderers and Legion Space Power Modes
Two settings do the heavy lifting. The JIT recompiler translates the DS’s ARM code into native code and caches it; the project treats it as the route to full speed, and on the Z2 Go’s four Zen 3 cores it should simply be on. If a title misbehaves with it, disabling fast memory, then the JIT itself, is the documented diagnostic.
For 3D, the project’s FAQ frames the renderer choice plainly. The software renderer is the most accurate and the most CPU-intensive; it draws at native resolution and can be threaded across cores. The OpenGL renderer hands the work to the Radeon graphics — potentially faster, slightly less accurate — and unlocks internal resolution scaling, which only sharpens the 3D layer: sprites and backgrounds come from a separate 2D engine at native resolution, so a 3D racer gains far more than a 2D platformer. OpenGL at two to three times scale is the sensible ceiling here.
Legion Space’s power modes, described in words, run from a quiet low-power preset through balanced to a performance mode, with a custom option besides. DS emulation belongs on the quiet end: the workload is light, the fan stays near silent, and the 55.5Wh battery stretches sessions far beyond what native PC games allow. Save the higher modes for heavier emulators.
Saves Beside the Game, and the Multiplayer Reality
melonDS detects each game’s save memory type automatically and writes a raw save beside the game file. That makes saves portable by construction: copy a game and its save to a desktop install and progress continues with no conversion. One documented exception: WarioWare DIY and Jam with the Band use a save type the project states it does not yet support.
Multiplayer deserves plain words, because the project itself lists Wi-Fi as a work in progress. The half that functions is local: two melonDS instances, on one machine or across a home network, connect as two DS systems, and the FAQ warns the link is timing-sensitive and may not stay stable beyond two instances. Online play reaches only community-run replacement servers for the discontinued Nintendo Wi-Fi Connection.
Gear That Fits the Go S Setup
Lenovo Legion Go S
The machine this guide is written for, in its Ryzen Z2 Go configuration with Windows 11 Home.
Specs:
- Processor: AMD Ryzen Z2 Go (Zen 3, 4 cores, 8 threads, up to 4.3GHz)
- Graphics: Integrated AMD Radeon graphics
- Memory: 16GB LPDDR5x-6400
- Storage: 512GB SSD, microSD slot
- Display: 8-inch 1920×1200 touchscreen, 48 to 120Hz variable refresh
- Battery: 55.5Wh
- Weight: about 740g
MEKO Universal Stylus 2-Pack
A passive stylus restores the fine point the DS bottom screen was designed around, with a spare for the travel case.
Specs:
- Tips: disc and fiber ends, replaceable, 6 replacement tips included
- Dimensions: 5.5 x 0.35 x 0.35 inches
- Weight: 0.7 ounces
- Compatibility: all capacitive touchscreens, no battery or pairing needed
SanDisk 1TB Extreme microSDXC Card
A fast 1TB card swallows a full DS library many times over.
Specs:
- Capacity: 1TB microSDXC, UHS-I
- Model: SDSQXAV-1T00-GN6MA
- Maker-stated speeds: up to 190 MB/s read, 130 MB/s write
- Ratings: C10, U3, V30, A2
Samsung T7 Portable SSD 1TB
A backup drive for the whole setup: the portable melonDS folder, your dumps and a DSi NAND copy here in one drag.
Specs:
- Capacity: 1TB
- Model: MU-PC1T0T/AM
- Interface: USB 3.2 Gen 2
- Maker-stated speeds: up to 1,050 MB/s read, 1,000 MB/s write
- Security: AES 256-bit hardware encryption
Anker 341 USB-C Hub (7-in-1)
One hub turns the Go S into a desk machine with a display, wired networking and card slots.
Specs:
- Model: A8346
- Video: HDMI output up to 4K
- Charging: USB-C pass-through up to 85W to the host
- Card slots: microSD and SD
How to Choose
Choose by the library you actually play. Touch-heavy titles argue for the stylus and the Natural layout that keeps the bottom screen full-size; action games argue for Hybrid with Auto sizing and the pad mapped once. If you never open the system menu and own no DSi titles, the built-in replacement BIOS is enough and dumping can wait. Mostly 2D? The threaded software renderer is the accurate default. Mostly 3D? OpenGL at two or three times scale, JIT on.
Who Should Skip
Skip this setup if multiplayer is your main reason for DS emulation — the project labels Wi-Fi a work in progress and the online half depends on community servers. Skip DSi mode unless a specific DSi title is the goal, since it demands the full dumped file set for an experimental mode. Skip the stylus if your library is pad-driven action games. And skip this guide if your Go S runs SteamOS: it covers the Windows model, and the SteamOS install route differs.
FAQ
Does melonDS on the Go S need BIOS files?
For DS games, no. Since version 0.9.4 the emulator includes a replacement BIOS and generated firmware that boot most titles directly. Dumps from your own DS remain the route to firmware boot, and DSi mode still requires the full DSi file set from your own console.
Why will the DS system menu not boot with my firmware file?
Almost always because the firmware came from a DSi or 3DS. Those dumps are 128KB of configuration data without boot code, and the project states they are not bootable. Keep Boot game directly enabled with them, or dump from an original DS or DS Lite.
Which layout works best on the 8-inch screen?
Natural, for most games: the stacked screens scale to three times native size and nearly fill the panel’s height. Hybrid with Auto sizing suits games that treat one screen as a map or menu, and rotation covers the book-style titles.
Can two people play DS multiplayer on the Go S?
Locally, within limits: two instances on one machine or across a home network. The project warns the link is timing-sensitive and labels Wi-Fi a work in progress overall.
Final Verdict
The Legion Go S removes the two frictions that follow DS emulation on most Windows machines: the emulator runs natively in a portable folder, and the touchscreen keeps the bottom screen a touchscreen. Set it up once — Natural layout, JIT on, OpenGL at a modest scale for 3D titles, the quiet Legion Space preset — and the emulator disappears behind the library. Add real dumps when firmware boot or DSi mode calls for them.











