- Top Pick: SteelSeries Arctis Nova 7 Gen 2
- Runner-up: WD_BLACK SN850X 2TB
- Also consider: Valve Steam Deck OLED 512GB
Most survival games reach Linux through Proton and a prayer. 7 Days to Die is one of the exceptions: The Fun Pimps ship a real native Linux client on Steam, a native Linux dedicated server, and a Steam Deck badge earned on that native build rather than on a compatibility layer. For Linux players, this is the rare always-online survival game where the operating system is a supported platform instead of an afterthought.
That native support comes with fine print worth understanding before a group commits to a long campaign. Easy Anti-Cheat rides along with the native build and can be switched off, but switching it off locks you out of protected servers and all console cross-play. The dedicated server is a proper Linux binary, yet x86-64 only, which rules out the ARM boards people love to host on.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
7 Days to Die runs natively on Linux through Steam, no Proton involved, and Valve rates it Verified on Steam Deck on that native build. Easy Anti-Cheat ships inside the client and can be launched without it for modded play, but cross-play with PlayStation 5 and Xbox Series X|S players requires EAC on and a vanilla game. The dedicated server is a genuine Linux build, but x86-64 only.
A native client, not a Proton case
The Steam package tells the story plainly. Alongside the Windows and macOS depots, 7 Days to Die carries a dedicated Linux depot of roughly the same size as the Windows one, which means Linux players download a build compiled for their system rather than a Windows binary wrapped in translation. Steam’s own compatibility data for the game lists the recommended runtime as native, and the SteamOS entry reads Compatible because the game runs successfully on SteamOS as itself.
This matters in practical ways. There is no Proton version to pick and no compatibility tool to force: the Linux build is one of the platforms The Fun Pimps compile and ship. The game left its long early access run with version 1.0 in July 2024 and has continued through the 2.x and 3.x updates since, with the Linux client carried along through each one.
Steam Deck: Verified on the native build
Valve rates 7 Days to Die Verified on Steam Deck, the top badge, and the published test notes show why. All functionality is accessible with the default controller configuration, the game shows Steam Deck controller icons, interface text is legible, and the default graphics configuration performs well. Because the Deck runs the native Linux build, none of those checks depend on Proton behaviour.
One note in Valve’s report deserves attention: single-player gameplay requires an active internet connection. That is a game-side requirement, not a Linux quirk, and it applies to solo sessions just as it does to multiplayer ones. Plan accordingly if your Deck play happens away from a network. Horde nights are also the heaviest moments the game produces, with large zombie counts stressing both CPU and memory, so the default configuration is a sensible starting point before raising settings.
Easy Anti-Cheat on Linux: present, native and switchable
Steam lists Easy Anti-Cheat as this game’s anti-cheat software, and it is part of the native Linux build rather than something bolted onto the Windows version. Linux players are not asked to run a foreign anti-cheat through a compatibility layer; EAC runs as a native component of the build they already have.
The unusual part is that EAC here is a choice. The game’s launcher offers a Play Without EAC option alongside the normal start, and server owners control the same switch through the EACEnabled property in serverconfig.xml. Playing without EAC is the documented route for modded games, since the modding scene builds on the unprotected client. The trade-offs are equally documented: EAC-protected servers will not accept a client launched without it, and console cross-play is impossible without it, because The Fun Pimps’ cross-play requirements demand EAC switched on. Nothing here needs a workaround or a bypass; the toggle is a feature the developer ships, with stated consequences in both directions.
The dedicated server: a real Linux server build
For groups, the strongest part of the Linux story is the server. The 7 Days to Die Dedicated Server is a free tool on Steam, app 294420, and it does not require owning the game on the server machine. On Linux the standard install route is SteamCMD with an anonymous login, followed by app_update 294420, after which the server starts through the bundled startserver.sh script pointed at your copy of serverconfig.xml.
The architecture needs stating honestly. The Linux server executable is 7DaysToDieServer.x86_64, a 64-bit x86 binary. There is no ARM build, so a Raspberry Pi or another ARM board cannot host this game, whatever its other virtues as a home server. Any ordinary x86-64 Linux PC, home server or virtual machine is fair game. The server listens on TCP port 26900 with a small block of UDP ports starting at the same number, keeps its saves under the 7DaysToDie folder in the user profile, and is configured entirely through the serverconfig.xml file, where name, player count, world choice and the EAC and cross-play properties all live.
Cross-play with PlayStation 5 and Xbox Series X|S
Cross-play is official and documented: PC players on Steam share servers with PlayStation 5 and Xbox Series X|S players, with dedicated-server cross-play arriving in the V2.0 update. The Fun Pimps publish a list of required server settings, and consoles only join servers that meet all of them. The headline conditions are EAC enabled, the ServerAllowCrossplay property set to true, eight or fewer players, a generated world no larger than 8192, no mods, and every player on the same game version.
Two consequences follow. First, cross-play and mods are mutually exclusive, because cross-play demands EAC and modded play demands it off; a group chooses one or the other per server. Second, PC players are the flexible side of the arrangement: as the official requirements put it, PC players can join servers regardless of settings, while consoles cannot. The old PlayStation 4 and Xbox One versions from 2016 sit outside all of this entirely; they never received the modern updates and cannot join these servers.
Gear for long horde nights
SteelSeries Arctis Nova 7 Gen 2
A co-op survival game lives on voice chat, and horde night callouts are no place for a failing battery. This headset runs game audio over its 2.4 GHz dongle while Bluetooth carries a phone or chat device at the same time, so a call never costs you the game mix.
Specs:
– 40 mm neodymium magnetic drivers
– Simultaneous 2.4 GHz wireless and Bluetooth
– Maker-rated battery life up to 54 hours, USB-C fast charge
– ClearCast Gen 2 retractable microphone with noise rejection
– Model 61730, over-ear design
WD_BLACK SN850X 2TB
A native install still lands close to twenty gigabytes, and generated worlds stream constantly from disk as players spread out. This drive gives the game and a growing Steam library fast NVMe room on any Linux desktop with a spare M.2 slot.
Specs:
– 2TB capacity, M.2 2280 form factor
– PCIe Gen4 x4 NVMe interface
– Maker-rated sequential reads up to 7,300 MB/s
– Model WDS200T2X0E
Valve Steam Deck OLED 512GB
The Deck is the easiest way to take a solo world on the road, and this game is one of the survival titles whose Verified badge rests on a native build. Remember Valve’s note that even single-player needs an internet connection before you settle in somewhere offline.
Specs:
– 7.4-inch HDR OLED display, 1280 by 800
– AMD Zen 2 and RDNA 2 APU with 16GB LPDDR5 memory
– 512GB NVMe SSD
– Wi-Fi 6E and Bluetooth
– Sold mainly through Valve’s own store; Amazon listings are third-party sellers
Logitech G502 HERO
Inventory management, building menus and hotbar swaps fill a survival session with pointer work. This wired mouse brings a precise sensor and enough programmable buttons to move the common actions off the keyboard.
Specs:
– HERO sensor, up to 25,600 DPI
– 11 programmable buttons
– Adjustable weight system with five 3.6 g weights
– LIGHTSYNC RGB lighting
– Wired USB connection
Keychron V3
Server hosts and modders spend real time in config files and console commands, and a tenkeyless board with QMK and VIA support lets you remap keys at the keyboard level, which keeps working across every Linux install you plug it into.
Specs:
– Tenkeyless layout with rotary knob
– QMK and VIA remapping support
– Hot-swappable K Pro Brown switches
– Wired USB-C connection
– Maker-rated 1,000 Hz polling
How to choose
Start with where your group plays. A PC-only group that wants mods should launch without EAC and host on any spare x86-64 Linux machine through SteamCMD; the setup is an evening’s work and the server costs nothing beyond the hardware. A group with console players has its decisions made for it: EAC on, cross-play on, vanilla game, eight slots, and a world at or under the size cap.
Solo and Deck players can simply install and play the native build, keeping the internet requirement in mind for offline trips. If you were hoping to host on a Raspberry Pi or another ARM board, choose a different machine now rather than after a failed install; the server binary is x86-64 only and no setting changes that. Everyone should also decide the EAC question before the first session, because flipping it later changes which servers the group can use together.
Who should skip
Skip this on Linux if your group’s non-negotiable is a heavily modded world shared with console friends; the documented rules make that combination impossible on any operating system. Skip it if your only spare hosting hardware is ARM-based, since the dedicated server has no build for it. Players who want fully offline single-player should also look elsewhere, because Valve’s own compatibility notes flag that solo play requires an active connection. And if your group already owns the legacy PlayStation 4 or Xbox One versions, those copies cannot join the modern cross-play servers at all.
FAQ
Does 7 Days to Die need Proton on Linux?
No. The game ships a native Linux client on Steam, and Steam’s compatibility data lists native as the recommended runtime. There is no compatibility layer in the normal route on desktop Linux or on Steam Deck.
Can I run the dedicated server on a Raspberry Pi?
No. The Linux server executable is an x86-64 binary and there is no ARM build, so a Pi cannot host the game. Any ordinary 64-bit x86 Linux PC or virtual machine works, installed through SteamCMD with an anonymous login.
Why will my console friends not join my server?
The Fun Pimps’ cross-play requirements are strict: EAC enabled, cross-play allowed in the config, eight or fewer players, a world no larger than 8192, no mods and matching game versions. Miss any one and consoles silently drop the server while PC players still join normally.
What does turning EAC off actually change?
Launching without EAC is the supported route for modded play, and the option sits in the game’s own launcher. The cost is access: EAC-protected servers refuse non-EAC clients, and console cross-play requires EAC on, so the toggle decides which worlds your group can share.
Final verdict
7 Days to Die is one of the strongest native Linux citizens in the survival genre: a real Linux client, a Verified Steam Deck badge earned on that client, a free Linux dedicated server, and official cross-play with the current consoles. Its limits are plain and documented rather than hidden: EAC and mods pull in opposite directions, cross-play runs under a strict settings list, and the server wants x86-64 hardware. Groups that accept those terms get a zombie survival game that treats Linux as a first-class platform.











